linuxppc-dev.lists.ozlabs.org archive mirror
 help / color / mirror / Atom feed
From: Paul Gortmaker <paul.gortmaker@windriver.com>
To: linuxppc-dev@ozlabs.org
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Subject: [PATCH 1/3] sbc834x: Add support for Wind River SBC834x boards
Date: Wed,  9 Jan 2008 00:49:30 -0500	[thread overview]
Message-ID: <1199857773848-git-send-email-paul.gortmaker@windriver.com> (raw)
Message-ID: <ac667c5b2e8acb0f92d31b8e3b590432bb939df9.1199850992.git.paul.gortmaker@windriver.com> (raw)
In-Reply-To: <11998577723665-git-send-email-paul.gortmaker@windriver.com>

This adds the basic support for the Wind River SBC834x boards.  The
SBC8349 is more common, although it should work on the SBC8347 board
as well.  Support is heavily based on the existing MPC834x_MDS code.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
---
 arch/powerpc/platforms/83xx/Kconfig   |    9 ++-
 arch/powerpc/platforms/83xx/Makefile  |    1 +
 arch/powerpc/platforms/83xx/sbc834x.c |  116 +++++++++++++++++++++++++++++++++
 3 files changed, 125 insertions(+), 1 deletions(-)

diff --git a/arch/powerpc/platforms/83xx/Kconfig b/arch/powerpc/platforms/83xx/Kconfig
index 2430ac8..782bff0 100644
--- a/arch/powerpc/platforms/83xx/Kconfig
+++ b/arch/powerpc/platforms/83xx/Kconfig
@@ -55,6 +55,13 @@ config MPC837x_MDS
 	select DEFAULT_UIMAGE
 	help
 	  This option enables support for the MPC837x MDS Processor Board.
+
+config SBC834x
+	bool "Wind River SBC834x"
+	select DEFAULT_UIMAGE
+	help
+	  This option enables support for the Wind River SBC834x board.
+
 endchoice
 
 config PPC_MPC831x
@@ -73,7 +80,7 @@ config MPC834x
 	bool
 	select PPC_UDBG_16550
 	select PPC_INDIRECT_PCI
-	default y if MPC834x_MDS || MPC834x_ITX
+	default y if MPC834x_MDS || MPC834x_ITX || SBC834x
 
 config PPC_MPC836x
 	bool
diff --git a/arch/powerpc/platforms/83xx/Makefile b/arch/powerpc/platforms/83xx/Makefile
index df46629..3a35242 100644
--- a/arch/powerpc/platforms/83xx/Makefile
+++ b/arch/powerpc/platforms/83xx/Makefile
@@ -10,3 +10,4 @@ obj-$(CONFIG_MPC834x_ITX)	+= mpc834x_itx.o
 obj-$(CONFIG_MPC836x_MDS)	+= mpc836x_mds.o
 obj-$(CONFIG_MPC832x_MDS)	+= mpc832x_mds.o
 obj-$(CONFIG_MPC837x_MDS)	+= mpc837x_mds.o
+obj-$(CONFIG_SBC834x)		+= sbc834x.o
diff --git a/arch/powerpc/platforms/83xx/sbc834x.c b/arch/powerpc/platforms/83xx/sbc834x.c
new file mode 100644
index 0000000..b448123
--- /dev/null
+++ b/arch/powerpc/platforms/83xx/sbc834x.c
@@ -0,0 +1,116 @@
+/*
+ * arch/powerpc/platforms/83xx/sbc834x.c
+ *
+ * Wind River SBC834x board specific routines
+ *
+ * By Paul Gortmaker (see MAINTAINERS for contact information)
+ *
+ * Based largely on the mpc834x_mds.c support by Kumar Gala.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/stddef.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/reboot.h>
+#include <linux/pci.h>
+#include <linux/kdev_t.h>
+#include <linux/major.h>
+#include <linux/console.h>
+#include <linux/delay.h>
+#include <linux/seq_file.h>
+#include <linux/root_dev.h>
+#include <linux/of_platform.h>
+
+#include <asm/system.h>
+#include <asm/atomic.h>
+#include <asm/time.h>
+#include <asm/io.h>
+#include <asm/machdep.h>
+#include <asm/ipic.h>
+#include <asm/irq.h>
+#include <asm/prom.h>
+#include <asm/udbg.h>
+#include <sysdev/fsl_soc.h>
+
+#include "mpc83xx.h"
+
+/* ************************************************************************
+ *
+ * Setup the architecture
+ *
+ */
+static void __init sbc834x_setup_arch(void)
+{
+#ifdef CONFIG_PCI
+	struct device_node *np;
+#endif
+
+	if (ppc_md.progress)
+		ppc_md.progress("sbc834x_setup_arch()", 0);
+
+#ifdef CONFIG_PCI
+	for_each_compatible_node(np, "pci", "fsl,mpc8349-pci")
+		mpc83xx_add_bridge(np);
+#endif
+
+}
+
+static void __init sbc834x_init_IRQ(void)
+{
+	struct device_node *np;
+
+	np = of_find_node_by_type(NULL, "ipic");
+	if (!np)
+		return;
+
+	ipic_init(np, 0);
+
+	/* Initialize the default interrupt mapping priorities,
+	 * in case the boot rom changed something on us.
+	 */
+	ipic_set_default_priority();
+}
+
+static struct of_device_id sbc834x_ids[] = {
+	{ .type = "soc", },
+	{ .compatible = "soc", },
+	{},
+};
+
+static int __init sbc834x_declare_of_platform_devices(void)
+{
+	if (!machine_is(sbc834x))
+		return 0;
+
+	of_platform_bus_probe(NULL, sbc834x_ids, NULL);
+	return 0;
+}
+device_initcall(sbc834x_declare_of_platform_devices);
+
+/*
+ * Called very early, MMU is off, device-tree isn't unflattened
+ */
+static int __init sbc834x_probe(void)
+{
+	unsigned long root = of_get_flat_dt_root();
+
+	return of_flat_dt_is_compatible(root, "SBC834x");
+}
+
+define_machine(sbc834x) {
+	.name			= "SBC834x",
+	.probe			= sbc834x_probe,
+	.setup_arch		= sbc834x_setup_arch,
+	.init_IRQ		= sbc834x_init_IRQ,
+	.get_irq		= ipic_get_irq,
+	.restart		= mpc83xx_restart,
+	.time_init		= mpc83xx_time_init,
+	.calibrate_decr		= generic_calibrate_decr,
+	.progress		= udbg_progress,
+};
-- 
1.5.0.rc1.gf4b6c

  reply	other threads:[~2008-01-09  5:49 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2008-01-09  5:49 [PATCH 0/3] Powerpc support for SBC834x board Paul Gortmaker
     [not found] ` <ac667c5b2e8acb0f92d31b8e3b590432bb939df9.1199850992.git.paul.gortmaker@windriver.com>
2008-01-09  5:49   ` Paul Gortmaker [this message]
2008-01-09  7:01     ` [PATCH 1/3] sbc834x: Add support for Wind River SBC834x boards Stephen Rothwell
2008-01-15 14:13       ` Kumar Gala
     [not found]   ` <01993202680f1b46bad03b1836e730e297d353fb.1199850992.git.paul.gortmaker@windriver.com>
2008-01-09  5:49     ` [PATCH 3/3] sbc834x: Add default config file for Wind River SBC8349 board Paul Gortmaker
     [not found]   ` <b9cda8aa586eba852f0763db2347d545a5b31be6.1199850992.git.paul.gortmaker@windriver.com>
2008-01-09  5:49     ` [PATCH 2/3] sbc834x: Add device tree source for Wind River SBC834x board Paul Gortmaker
2008-01-10  2:06     ` David Gibson

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1199857773848-git-send-email-paul.gortmaker@windriver.com \
    --to=paul.gortmaker@windriver.com \
    --cc=linuxppc-dev@ozlabs.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).