From: John Rigby <jrigby@freescale.com>
To: linuxppc-dev@ozlabs.org
Subject: [Add mpc5121 support PATCH v2 2/8] Add mpc512x ipic support
Date: Wed, 16 Jan 2008 14:37:21 -0700 [thread overview]
Message-ID: <1200519447-25555-2-git-send-email-jrigby@freescale.com> (raw)
In-Reply-To: <1200519447-25555-1-git-send-email-jrigby@freescale.com>
Added ipic_info entries for vectors used by 512x that
were previously unused by 83xx.
Signed-off-by: John Rigby <jrigby@freescale.com>
---
arch/powerpc/sysdev/ipic.c | 62 ++++++++++++++++++++++++++++++++++++++++++++
1 files changed, 62 insertions(+), 0 deletions(-)
diff --git a/arch/powerpc/sysdev/ipic.c b/arch/powerpc/sysdev/ipic.c
index 7274750..4c016da 100644
--- a/arch/powerpc/sysdev/ipic.c
+++ b/arch/powerpc/sysdev/ipic.c
@@ -48,6 +48,13 @@ static struct ipic_info ipic_info[] = {
.bit = 17,
.prio_mask = 1,
},
+ [3] = {
+ .mask = IPIC_SIMSR_H,
+ .prio = IPIC_SIPRR_C,
+ .force = IPIC_SIFCR_H,
+ .bit = 18,
+ .prio_mask = 2,
+ },
[4] = {
.mask = IPIC_SIMSR_H,
.prio = IPIC_SIPRR_C,
@@ -55,6 +62,34 @@ static struct ipic_info ipic_info[] = {
.bit = 19,
.prio_mask = 3,
},
+ [5] = {
+ .mask = IPIC_SIMSR_H,
+ .prio = IPIC_SIPRR_C,
+ .force = IPIC_SIFCR_H,
+ .bit = 20,
+ .prio_mask = 4,
+ },
+ [6] = {
+ .mask = IPIC_SIMSR_H,
+ .prio = IPIC_SIPRR_C,
+ .force = IPIC_SIFCR_H,
+ .bit = 21,
+ .prio_mask = 5,
+ },
+ [7] = {
+ .mask = IPIC_SIMSR_H,
+ .prio = IPIC_SIPRR_C,
+ .force = IPIC_SIFCR_H,
+ .bit = 22,
+ .prio_mask = 6,
+ },
+ [8] = {
+ .mask = IPIC_SIMSR_H,
+ .prio = IPIC_SIPRR_C,
+ .force = IPIC_SIFCR_H,
+ .bit = 23,
+ .prio_mask = 7,
+ },
[9] = {
.mask = IPIC_SIMSR_H,
.prio = IPIC_SIPRR_D,
@@ -223,6 +258,20 @@ static struct ipic_info ipic_info[] = {
.bit = 7,
.prio_mask = 7,
},
+ [40] = {
+ .mask = IPIC_SIMSR_H,
+ .prio = IPIC_SIPRR_B,
+ .force = IPIC_SIFCR_H,
+ .bit = 8,
+ .prio_mask = 0,
+ },
+ [41] = {
+ .mask = IPIC_SIMSR_H,
+ .prio = IPIC_SIPRR_B,
+ .force = IPIC_SIFCR_H,
+ .bit = 9,
+ .prio_mask = 1,
+ },
[42] = {
.mask = IPIC_SIMSR_H,
.prio = IPIC_SIPRR_B,
@@ -230,6 +279,13 @@ static struct ipic_info ipic_info[] = {
.bit = 10,
.prio_mask = 2,
},
+ [43] = {
+ .mask = IPIC_SIMSR_H,
+ .prio = IPIC_SIPRR_B,
+ .force = IPIC_SIFCR_H,
+ .bit = 11,
+ .prio_mask = 3,
+ },
[44] = {
.mask = IPIC_SIMSR_H,
.prio = IPIC_SIPRR_B,
@@ -387,6 +443,12 @@ static struct ipic_info ipic_info[] = {
.force = IPIC_SIFCR_L,
.bit = 18,
},
+ [83] = {
+ .mask = IPIC_SIMSR_L,
+ .prio = 0,
+ .force = IPIC_SIFCR_L,
+ .bit = 19,
+ },
[84] = {
.mask = IPIC_SIMSR_L,
.prio = 0,
--
1.5.3.5.726.g41a7a
next prev parent reply other threads:[~2008-01-16 21:37 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-01-16 21:37 [Add mpc5121 support PATCH v2 1/8] Add IPIC config option John Rigby
2008-01-16 21:37 ` John Rigby [this message]
2008-01-16 21:37 ` [Add mpc5121 support PATCH v2 3/8] Basic Freescale MPC512x support John Rigby
2008-01-16 21:37 ` [Add mpc5121 support PATCH v2 4/8] Device tree for MPC5121 ADS John Rigby
2008-01-16 21:37 ` [Add mpc5121 support PATCH v2 5/8] Separate MPC52xx PSC FIFO registers from rest of PSC John Rigby
2008-01-16 21:37 ` [Add mpc5121 support PATCH v2 6/8] Cleanup checkpatch.pl problems in mpc52xx_uart.c John Rigby
2008-01-16 21:37 ` [Add mpc5121 support PATCH v2 7/8] Factor out 52xx dependencies from 52xx psc driver John Rigby
2008-01-16 21:37 ` [Add mpc5121 support PATCH v2 8/8] Add MPC512x support to MPC52xx " John Rigby
2008-01-17 17:35 ` [Add mpc5121 support PATCH v2 6/8] Cleanup checkpatch.pl problems in mpc52xx_uart.c Grant Likely
2008-01-17 17:36 ` [Add mpc5121 support PATCH v2 5/8] Separate MPC52xx PSC FIFO registers from rest of PSC Grant Likely
2008-01-17 17:30 ` [Add mpc5121 support PATCH v2 4/8] Device tree for MPC5121 ADS Grant Likely
2008-01-16 23:02 ` [Add mpc5121 support PATCH v2 3/8] Basic Freescale MPC512x support Stephen Rothwell
2008-01-17 17:21 ` Grant Likely
2008-01-17 0:16 ` [Add mpc5121 support PATCH v2 2/8] Add mpc512x ipic support David Gibson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1200519447-25555-2-git-send-email-jrigby@freescale.com \
--to=jrigby@freescale.com \
--cc=linuxppc-dev@ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).