From: John Rigby <jrigby@freescale.com>
To: linuxppc-dev@ozlabs.org
Subject: [Add mpc5121 support PATCH v2 5/8] Separate MPC52xx PSC FIFO registers from rest of PSC
Date: Wed, 16 Jan 2008 14:37:24 -0700 [thread overview]
Message-ID: <1200519447-25555-5-git-send-email-jrigby@freescale.com> (raw)
In-Reply-To: <1200519447-25555-4-git-send-email-jrigby@freescale.com>
This is in preparation for the addition of MPC512x
PSC support. The main difference in the 512x is
in the fifo registers.
Signed-off-by: John Rigby <jrigby@freescale.com>
---
drivers/serial/mpc52xx_uart.c | 10 ++++++----
include/asm-powerpc/mpc52xx_psc.h | 3 +++
include/asm-ppc/mpc52xx_psc.h | 3 +++
3 files changed, 12 insertions(+), 4 deletions(-)
diff --git a/drivers/serial/mpc52xx_uart.c b/drivers/serial/mpc52xx_uart.c
index ec36ad7..25a91c9 100644
--- a/drivers/serial/mpc52xx_uart.c
+++ b/drivers/serial/mpc52xx_uart.c
@@ -111,6 +111,7 @@ static void mpc52xx_uart_of_enumerate(void);
#endif
#define PSC(port) ((struct mpc52xx_psc __iomem *)((port)->membase))
+#define FIFO(port) ((struct mpc52xx_psc_fifo __iomem *)(PSC(port)+1))
/* Forward declaration of the interruption handling routine */
@@ -222,6 +223,7 @@ static int
mpc52xx_uart_startup(struct uart_port *port)
{
struct mpc52xx_psc __iomem *psc = PSC(port);
+ struct mpc52xx_psc_fifo __iomem *fifo = FIFO(port);
int ret;
/* Request IRQ */
@@ -238,10 +240,10 @@ mpc52xx_uart_startup(struct uart_port *port)
out_be16(&psc->mpc52xx_psc_clock_select, 0xdd00); /* /16 prescaler on */
- out_8(&psc->rfcntl, 0x00);
- out_be16(&psc->rfalarm, 0x1ff);
- out_8(&psc->tfcntl, 0x07);
- out_be16(&psc->tfalarm, 0x80);
+ out_8(&fifo->rfcntl, 0x00);
+ out_be16(&fifo->rfalarm, 0x1ff);
+ out_8(&fifo->tfcntl, 0x07);
+ out_be16(&fifo->tfalarm, 0x80);
port->read_status_mask |= MPC52xx_PSC_IMR_RXRDY | MPC52xx_PSC_IMR_TXRDY;
out_be16(&psc->mpc52xx_psc_imr,port->read_status_mask);
diff --git a/include/asm-powerpc/mpc52xx_psc.h b/include/asm-powerpc/mpc52xx_psc.h
index 26690d2..bea42b9 100644
--- a/include/asm-powerpc/mpc52xx_psc.h
+++ b/include/asm-powerpc/mpc52xx_psc.h
@@ -153,6 +153,9 @@ struct mpc52xx_psc {
u8 reserved16[3];
u8 irfdr; /* PSC + 0x54 */
u8 reserved17[3];
+};
+
+struct mpc52xx_psc_fifo {
u16 rfnum; /* PSC + 0x58 */
u16 reserved18;
u16 tfnum; /* PSC + 0x5c */
diff --git a/include/asm-ppc/mpc52xx_psc.h b/include/asm-ppc/mpc52xx_psc.h
index c82b8d4..39fcd02 100644
--- a/include/asm-ppc/mpc52xx_psc.h
+++ b/include/asm-ppc/mpc52xx_psc.h
@@ -159,6 +159,9 @@ struct mpc52xx_psc {
u8 reserved16[3];
u8 irfdr; /* PSC + 0x54 */
u8 reserved17[3];
+};
+
+struct mpc52xx_psc_fifo {
u16 rfnum; /* PSC + 0x58 */
u16 reserved18;
u16 tfnum; /* PSC + 0x5c */
--
1.5.3.5.726.g41a7a
next prev parent reply other threads:[~2008-01-16 21:37 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-01-16 21:37 [Add mpc5121 support PATCH v2 1/8] Add IPIC config option John Rigby
2008-01-16 21:37 ` [Add mpc5121 support PATCH v2 2/8] Add mpc512x ipic support John Rigby
2008-01-16 21:37 ` [Add mpc5121 support PATCH v2 3/8] Basic Freescale MPC512x support John Rigby
2008-01-16 21:37 ` [Add mpc5121 support PATCH v2 4/8] Device tree for MPC5121 ADS John Rigby
2008-01-16 21:37 ` John Rigby [this message]
2008-01-16 21:37 ` [Add mpc5121 support PATCH v2 6/8] Cleanup checkpatch.pl problems in mpc52xx_uart.c John Rigby
2008-01-16 21:37 ` [Add mpc5121 support PATCH v2 7/8] Factor out 52xx dependencies from 52xx psc driver John Rigby
2008-01-16 21:37 ` [Add mpc5121 support PATCH v2 8/8] Add MPC512x support to MPC52xx " John Rigby
2008-01-17 17:35 ` [Add mpc5121 support PATCH v2 6/8] Cleanup checkpatch.pl problems in mpc52xx_uart.c Grant Likely
2008-01-17 17:36 ` [Add mpc5121 support PATCH v2 5/8] Separate MPC52xx PSC FIFO registers from rest of PSC Grant Likely
2008-01-17 17:30 ` [Add mpc5121 support PATCH v2 4/8] Device tree for MPC5121 ADS Grant Likely
2008-01-16 23:02 ` [Add mpc5121 support PATCH v2 3/8] Basic Freescale MPC512x support Stephen Rothwell
2008-01-17 17:21 ` Grant Likely
2008-01-17 0:16 ` [Add mpc5121 support PATCH v2 2/8] Add mpc512x ipic support David Gibson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1200519447-25555-5-git-send-email-jrigby@freescale.com \
--to=jrigby@freescale.com \
--cc=linuxppc-dev@ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).