From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from gate.crashing.org (gate.crashing.org [63.228.1.57]) (using TLSv1 with cipher DHE-RSA-AES256-SHA (256/256 bits)) (Client did not present a certificate) by ozlabs.org (Postfix) with ESMTP id CEB54DDDED for ; Thu, 24 Jan 2008 17:29:07 +1100 (EST) Subject: Re: [PATCH] [POWERPC] Always build setup-bus.c on powerpc From: Benjamin Herrenschmidt To: Kumar Gala In-Reply-To: References: Content-Type: text/plain Date: Thu, 24 Jan 2008 17:28:40 +1100 Message-Id: <1201156120.6815.48.camel@pasglop> Mime-Version: 1.0 Cc: Greg KH , linux-pci@atrey.karlin.mff.cuni.cz, Paul Mackerras , linux-kernel@vger.kernel.org, linuxppc-dev@ozlabs.org Reply-To: benh@kernel.crashing.org List-Id: Linux on PowerPC Developers Mail List List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , On Thu, 2008-01-24 at 00:07 -0600, Kumar Gala wrote: > The common arch/powerpc code calls in to functions in setup-bus.c > so some builds of ppc32 would fail. > > Note, ppc32 usage of setup-irq.c is limited to arch/ppc and should be > removed when arch/ppc goes away. I don't understand... the old code would build setup-bus.o for both PPC32 and PPC64 cases, how did you make it fail ? Ben. > Signed-off-by: Kumar Gala > --- > > Greg, recent changes that BenH has made to the arch/powerpc pci code make > this necessary. If you don't have an issue I'd like this patch to go via > the paulus's powerpc.git tree. > > - k > > drivers/pci/Makefile | 4 ++-- > 1 files changed, 2 insertions(+), 2 deletions(-) > > diff --git a/drivers/pci/Makefile b/drivers/pci/Makefile > index 945bf02..869d689 100644 > --- a/drivers/pci/Makefile > +++ b/drivers/pci/Makefile > @@ -31,8 +31,8 @@ obj-$(CONFIG_ALPHA) += setup-bus.o setup-irq.o > obj-$(CONFIG_ARM) += setup-bus.o setup-irq.o > obj-$(CONFIG_PARISC) += setup-bus.o > obj-$(CONFIG_SUPERH) += setup-bus.o setup-irq.o > -obj-$(CONFIG_PPC32) += setup-irq.o setup-bus.o > -obj-$(CONFIG_PPC64) += setup-bus.o > +obj-$(CONFIG_PPC) += setup-bus.o > +obj-$(CONFIG_PPC32) += setup-irq.o > obj-$(CONFIG_MIPS) += setup-bus.o setup-irq.o > obj-$(CONFIG_X86_VISWS) += setup-irq.o >