From: Jason Jin <Jason.jin@freescale.com>
To: galak@kernel.crashing.org
Cc: linuxppc-dev@ozlabs.org, Jason Jin <Jason.jin@freescale.com>
Subject: [PATCH 1/4 V2] booting-without-of for Freescale MSI
Date: Fri, 9 May 2008 17:03:27 +0800 [thread overview]
Message-ID: <1210323810-24833-1-git-send-email-Jason.jin@freescale.com> (raw)
Binding document adding for Freescale MSI support.
Signed-off-by: Jason Jin <Jason.jin@freescale.com>
---
Updated to V2 version per Segher's suggestion.
Documentation/powerpc/booting-without-of.txt | 40 +++++++++++++++++++++++++-
1 files changed, 39 insertions(+), 1 deletions(-)
diff --git a/Documentation/powerpc/booting-without-of.txt b/Documentation/powerpc/booting-without-of.txt
index 1d2a772..887783c 100644
--- a/Documentation/powerpc/booting-without-of.txt
+++ b/Documentation/powerpc/booting-without-of.txt
@@ -57,7 +57,10 @@ Table of Contents
n) 4xx/Axon EMAC ethernet nodes
o) Xilinx IP cores
p) Freescale Synchronous Serial Interface
- q) USB EHCI controllers
+ q) USB EHCI controllers
+ r) Freescale Display Interface Unit
+ s) Freescale on board FPGA
+ t) Freescael MSI interrupt controller
VII - Marvell Discovery mv64[345]6x System Controller chips
1) The /system-controller node
@@ -2870,6 +2873,41 @@ platforms are moved over to use the flattened-device-tree model.
reg = <0xe8000000 32>;
};
+ t) Freescale MSI interrupt controller
+
+ Reguired properities:
+ - compatible : set as "fsl,86xx-MSI" for 86xx cpu, "fsl,85xx-MSI" for 85xx
+ cpu and "fsl,83xx-MSI" for 83xx cpu.
+ - reg : should contain the address and the length of the shared message
+ interrupt register set.
+ - msi-available-ranges: use <start count> style section to define which
+ msi interrupt can be used in the 256 msi interrupts.
+ - interrupts : each one of the interrupts here is one entry per 32 MSIs,
+ and routed to the host interrupt controller. the interrupts should
+ be set as edge sensitive.
+ - interrupt-parent: the phandle for the interrupt controller
+ that services interrupts for this device. for 83xx cpu, the interrupts
+ are routed to IPIC, and for 85xx/86xx cpu the interrupts are routed
+ to MPIC.
+
+ Example (86xx CPU)
+ msi@41600 {
+ compatible = "fsl,86xx-MSI";
+ reg = <0x41600 0x80>;
+ msi-available-ranges = <0 0x100>;
+ interrupts = <
+ 0xb0 0
+ 0xb1 0
+ 0xb2 0
+ 0xb3 0
+ 0xb4 0
+ 0xb5 0
+ 0xb6 0
+ 0xb7 0>;
+ interrupt-parent = <&mpic>;
+ };
+
+
VII - Marvell Discovery mv64[345]6x System Controller chips
===========================================================
--
1.5.4
next reply other threads:[~2008-05-09 9:07 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-05-09 9:03 Jason Jin [this message]
2008-05-09 9:03 ` [PATCH 2/4 V4] MSI support on 83xx/85xx/86xx board Jason Jin
2008-05-09 12:21 ` Michael Ellerman
2008-05-13 2:18 ` Jin Zhengxiong
2008-05-09 13:31 ` Grant Likely
2008-05-09 9:26 ` [PATCH 1/4 V2] booting-without-of for Freescale MSI Segher Boessenkool
2008-05-09 9:52 ` Jin Zhengxiong
2008-05-09 10:13 ` Segher Boessenkool
2008-05-09 10:18 ` Jin Zhengxiong
2008-05-09 10:51 ` Segher Boessenkool
2008-05-09 13:25 ` Grant Likely
2008-05-13 2:31 ` Jin Zhengxiong
2008-05-09 13:34 ` Grant Likely
2008-05-09 16:18 ` Timur Tabi
2008-05-09 16:24 ` Grant Likely
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1210323810-24833-1-git-send-email-Jason.jin@freescale.com \
--to=jason.jin@freescale.com \
--cc=galak@kernel.crashing.org \
--cc=linuxppc-dev@ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).