From: Benjamin Herrenschmidt <benh@kernel.crashing.org>
To: Stefan Roese <sr@denx.de>
Cc: Jean Delvare <khali@linux-fr.org>,
Scott Wood <scottwood@freescale.com>,
Sean MacLennan <smaclennan@pikatech.com>,
Timur Tabi <timur@freescale.com>,
linuxppc-dev@ozlabs.org
Subject: Re: "cell-index" vs. "index" vs. no index in I2C device nodes
Date: Fri, 06 Jun 2008 14:17:37 +1000 [thread overview]
Message-ID: <1212725857.12464.16.camel@pasglop> (raw)
In-Reply-To: <200806051045.42966.sr@denx.de>
On Thu, 2008-06-05 at 10:45 +0200, Stefan Roese wrote:
> Full ack from me. So I suggest to use "cell-index" if available and
> otherwise
> use an incremented number, same as the FSL i2c driver does now:
>
> http://ozlabs.org/pipermail/linuxppc-dev/2008-June/057254.html
>
> If nobody objects I'll send a patch to add the cell-index to all 4xx
> dts files
> in a short while.
No, don't use cell-index. If you have a setup with 2 SOCs in
SMP or something like the Axon bridge on cell where you can have
multiple Axons in a system, cell-index will not be unique. They
will give you the index -within-a-chip- as it is used, as I
said in a separate mail, for things like power or clock control
bits & pieces. It will not be system-wide unique.
Ben.
next prev parent reply other threads:[~2008-06-06 4:23 UTC|newest]
Thread overview: 74+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-06-04 15:06 "cell-index" vs. "index" vs. no index in I2C device nodes Stefan Roese
2008-06-04 15:24 ` Timur Tabi
2008-06-04 15:43 ` Scott Wood
2008-06-05 2:19 ` Josh Boyer
2008-06-05 2:41 ` David Gibson
2008-06-06 2:40 ` Segher Boessenkool
2008-06-06 3:37 ` David Gibson
2008-06-07 0:30 ` Segher Boessenkool
2008-06-06 4:07 ` Grant Likely
2008-06-06 4:29 ` Sean MacLennan
2008-06-05 2:54 ` Sean MacLennan
2008-06-05 3:05 ` Josh Boyer
2008-06-05 3:16 ` Sean MacLennan
2008-06-05 6:22 ` Stefan Roese
2008-06-05 7:48 ` Jean Delvare
2008-06-05 8:45 ` Stefan Roese
2008-06-05 10:57 ` David Gibson
2008-06-05 11:52 ` Josh Boyer
2008-06-05 15:18 ` Timur Tabi
2008-06-05 22:47 ` David Gibson
2008-06-06 4:17 ` Benjamin Herrenschmidt [this message]
2008-06-06 4:16 ` Benjamin Herrenschmidt
2008-06-06 6:21 ` Jean Delvare
2008-06-06 7:47 ` Grant Likely
2008-06-06 8:45 ` Benjamin Herrenschmidt
2008-06-05 15:17 ` Timur Tabi
2008-06-05 15:44 ` Jochen Friedrich
2008-06-05 15:50 ` Timur Tabi
2008-06-05 16:10 ` Grant Likely
2008-06-05 16:18 ` Timur Tabi
2008-06-05 16:22 ` Jochen Friedrich
2008-06-05 16:30 ` Grant Likely
2008-06-05 16:40 ` Timur Tabi
2008-06-05 22:46 ` David Gibson
2008-06-05 16:35 ` Grant Likely
2008-06-05 23:59 ` Josh Boyer
2008-06-07 0:24 ` Segher Boessenkool
2008-06-05 21:37 ` Sean MacLennan
2008-06-05 23:48 ` Josh Boyer
2008-06-05 15:13 ` Timur Tabi
2008-06-05 15:39 ` Grant Likely
2008-06-05 15:43 ` Timur Tabi
2008-06-05 15:52 ` Segher Boessenkool
2008-06-05 16:09 ` Timur Tabi
2008-06-05 16:27 ` Scott Wood
2008-06-05 17:52 ` Timur Tabi
2008-06-05 18:04 ` Scott Wood
2008-06-05 16:00 ` Grant Likely
2008-06-05 16:13 ` Timur Tabi
2008-06-05 16:21 ` Josh Boyer
2008-06-05 16:25 ` Timur Tabi
2008-06-05 16:37 ` Grant Likely
2008-06-05 18:27 ` Josh Boyer
2008-06-05 18:35 ` Timur Tabi
2008-06-05 18:40 ` Josh Boyer
2008-06-05 18:46 ` Grant Likely
2008-06-05 18:56 ` Josh Boyer
2008-06-05 19:14 ` Grant Likely
2008-06-05 19:15 ` Josh Boyer
2008-06-05 19:16 ` Timur Tabi
2008-06-05 21:31 ` Segher Boessenkool
2008-06-05 22:56 ` David Gibson
2008-06-06 13:09 ` Timur Tabi
2008-06-06 13:42 ` Stefan Roese
2008-06-05 22:45 ` Sean MacLennan
2008-06-06 4:20 ` Benjamin Herrenschmidt
2008-06-25 21:46 ` Timur Tabi
2008-06-27 16:48 ` Jochen Friedrich
2008-06-05 15:46 ` Segher Boessenkool
2008-06-05 15:52 ` Jochen Friedrich
2008-06-05 15:53 ` Grant Likely
2008-06-06 4:19 ` Benjamin Herrenschmidt
2008-06-06 4:14 ` Benjamin Herrenschmidt
2008-06-06 4:13 ` Benjamin Herrenschmidt
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1212725857.12464.16.camel@pasglop \
--to=benh@kernel.crashing.org \
--cc=khali@linux-fr.org \
--cc=linuxppc-dev@ozlabs.org \
--cc=scottwood@freescale.com \
--cc=smaclennan@pikatech.com \
--cc=sr@denx.de \
--cc=timur@freescale.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).