[PATCH 0/5] Kill CONFIG_PPC_CPM_NEW_BINDING

[PATCH 0/5] Kill CONFIG_PPC_CPM_NEW_BINDING

[Kumar Gala]

With arch/ppc gone we can get rid of CONFIG_PPC_CPM_NEW_BINDING.  These
should be pretty trivial.

These will go via my powerpc-next tree if no one has issues.

- k

[PATCH 1/5] cpm_uart: fix whitespace issues

[Kumar Gala]

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
---
 drivers/serial/cpm_uart/cpm_uart.h      |    8 ++++----
 drivers/serial/cpm_uart/cpm_uart_core.c |    4 ++--
 drivers/serial/cpm_uart/cpm_uart_cpm1.c |    2 +-
 drivers/serial/cpm_uart/cpm_uart_cpm1.h |    2 +-
 drivers/serial/cpm_uart/cpm_uart_cpm2.c |    6 +++---
 drivers/serial/cpm_uart/cpm_uart_cpm2.h |    2 +-
 6 files changed, 12 insertions(+), 12 deletions(-)

diff --git a/drivers/serial/cpm_uart/cpm_uart.h b/drivers/serial/cpm_uart/cpm_uart.h
index 0cc39f8..3d07bec 100644
--- a/drivers/serial/cpm_uart/cpm_uart.h
+++ b/drivers/serial/cpm_uart/cpm_uart.h
@@ -6,7 +6,7 @@
  *  Copyright (C) 2004 Freescale Semiconductor, Inc.
  *
  *  2006 (c) MontaVista Software, Inc.
- * 	Vitaly Bordug <vbordug@ru.mvista.com>
+ *	Vitaly Bordug <vbordug@ru.mvista.com>
  *
  * This file is licensed under the terms of the GNU General Public License
  * version 2. This program is licensed "as is" without any warranty of any
@@ -28,7 +28,7 @@
 #define SERIAL_CPM_MAJOR	204
 #define SERIAL_CPM_MINOR	46
 
-#define IS_SMC(pinfo) 		(pinfo->flags & FLAG_SMC)
+#define IS_SMC(pinfo)		(pinfo->flags & FLAG_SMC)
 #define IS_DISCARDING(pinfo)	(pinfo->flags & FLAG_DISCARDING)
 #define FLAG_DISCARDING	0x00000004	/* when set, don't discard */
 #define FLAG_SMC	0x00000002
@@ -70,7 +70,7 @@ struct uart_cpm_port {
 	void			(*set_lineif)(struct uart_cpm_port *);
 	u8			brg;
 	uint			 dp_addr;
-	void 			*mem_addr;
+	void			*mem_addr;
 	dma_addr_t		 dma_addr;
 	u32			mem_size;
 	/* helpers */
@@ -79,7 +79,7 @@ struct uart_cpm_port {
 	/* Keep track of 'odd' SMC2 wirings */
 	int			is_portb;
 	/* wait on close if needed */
-	int 			wait_closing;
+	int			wait_closing;
 	/* value to combine with opcode to form cpm command */
 	u32			command;
 };
diff --git a/drivers/serial/cpm_uart/cpm_uart_core.c b/drivers/serial/cpm_uart/cpm_uart_core.c
index a19dc7e..b0104ca 100644
--- a/drivers/serial/cpm_uart/cpm_uart_core.c
+++ b/drivers/serial/cpm_uart/cpm_uart_core.c
@@ -13,7 +13,7 @@
  *  Copyright (C) 2004, 2007 Freescale Semiconductor, Inc.
  *            (C) 2004 Intracom, S.A.
  *            (C) 2005-2006 MontaVista Software, Inc.
- * 		Vitaly Bordug <vbordug@ru.mvista.com>
+ *		Vitaly Bordug <vbordug@ru.mvista.com>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -1305,7 +1305,7 @@ static int __init cpm_uart_console_setup(struct console *co, char *options)
 		pdata = pdev->dev.platform_data;
 		if (pdata)
 			if (pdata->init_ioports)
-    	                	pdata->init_ioports(pdata);
+				pdata->init_ioports(pdata);
 
 		cpm_uart_drv_get_platform_data(pdev, 1);
 	}
diff --git a/drivers/serial/cpm_uart/cpm_uart_cpm1.c b/drivers/serial/cpm_uart/cpm_uart_cpm1.c
index 74f1432..bec0c97 100644
--- a/drivers/serial/cpm_uart/cpm_uart_cpm1.c
+++ b/drivers/serial/cpm_uart/cpm_uart_cpm1.c
@@ -9,7 +9,7 @@
  *  Copyright (C) 2004 Freescale Semiconductor, Inc.
  *            (C) 2004 Intracom, S.A.
  *            (C) 2006 MontaVista Software, Inc.
- * 		Vitaly Bordug <vbordug@ru.mvista.com>
+ *		Vitaly Bordug <vbordug@ru.mvista.com>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
diff --git a/drivers/serial/cpm_uart/cpm_uart_cpm1.h b/drivers/serial/cpm_uart/cpm_uart_cpm1.h
index ddf46d3..b805698 100644
--- a/drivers/serial/cpm_uart/cpm_uart_cpm1.h
+++ b/drivers/serial/cpm_uart/cpm_uart_cpm1.h
@@ -2,7 +2,7 @@
  * linux/drivers/serial/cpm_uart/cpm_uart_cpm1.h
  *
  * Driver for CPM (SCC/SMC) serial ports
- * 
+ *
  * definitions for cpm1
  *
  */
diff --git a/drivers/serial/cpm_uart/cpm_uart_cpm2.c b/drivers/serial/cpm_uart/cpm_uart_cpm2.c
index bb862e2..e53524c 100644
--- a/drivers/serial/cpm_uart/cpm_uart_cpm2.c
+++ b/drivers/serial/cpm_uart/cpm_uart_cpm2.c
@@ -5,11 +5,11 @@
  *
  *  Maintainer: Kumar Gala (galak@kernel.crashing.org) (CPM2)
  *              Pantelis Antoniou (panto@intracom.gr) (CPM1)
- * 
+ *
  *  Copyright (C) 2004 Freescale Semiconductor, Inc.
  *            (C) 2004 Intracom, S.A.
  *            (C) 2006 MontaVista Software, Inc.
- * 		Vitaly Bordug <vbordug@ru.mvista.com>
+ *		Vitaly Bordug <vbordug@ru.mvista.com>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -273,7 +273,7 @@ void scc4_lineif(struct uart_cpm_port *pinfo)
 #endif
 
 /*
- * Allocate DP-Ram and memory buffers. We need to allocate a transmit and 
+ * Allocate DP-Ram and memory buffers. We need to allocate a transmit and
  * receive buffer descriptors from dual port ram, and a character
  * buffer area from host mem. If we are allocating for the console we need
  * to do it from bootmem
diff --git a/drivers/serial/cpm_uart/cpm_uart_cpm2.h b/drivers/serial/cpm_uart/cpm_uart_cpm2.h
index 40006a7..a48b56e 100644
--- a/drivers/serial/cpm_uart/cpm_uart_cpm2.h
+++ b/drivers/serial/cpm_uart/cpm_uart_cpm2.h
@@ -2,7 +2,7 @@
  * linux/drivers/serial/cpm_uart/cpm_uart_cpm2.h
  *
  * Driver for CPM (SCC/SMC) serial ports
- * 
+ *
  * definitions for cpm2
  *
  */
-- 
1.5.5.1

[PATCH 2/5] cpm_uart: Remove !CONFIG_PPC_CPM_NEW_BINDING code

[Kumar Gala]

Now that arch/ppc is gone we always define CONFIG_PPC_CPM_NEW_BINDING so
we can remove all the code associated with !CONFIG_PPC_CPM_NEW_BINDING.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
---
 drivers/serial/cpm_uart/cpm_uart.h      |    3 -
 drivers/serial/cpm_uart/cpm_uart_core.c |  371 +------------------------------
 drivers/serial/cpm_uart/cpm_uart_cpm1.c |  168 --------------
 drivers/serial/cpm_uart/cpm_uart_cpm1.h |   10 -
 drivers/serial/cpm_uart/cpm_uart_cpm2.c |  277 -----------------------
 drivers/serial/cpm_uart/cpm_uart_cpm2.h |   10 -
 6 files changed, 1 insertions(+), 838 deletions(-)

diff --git a/drivers/serial/cpm_uart/cpm_uart.h b/drivers/serial/cpm_uart/cpm_uart.h
index 3d07bec..5c76e0a 100644
--- a/drivers/serial/cpm_uart/cpm_uart.h
+++ b/drivers/serial/cpm_uart/cpm_uart.h
@@ -84,9 +84,6 @@ struct uart_cpm_port {
 	u32			command;
 };
 
-#ifndef CONFIG_PPC_CPM_NEW_BINDING
-extern int cpm_uart_port_map[UART_NR];
-#endif
 extern int cpm_uart_nr;
 extern struct uart_cpm_port cpm_uart_ports[UART_NR];
 
diff --git a/drivers/serial/cpm_uart/cpm_uart_core.c b/drivers/serial/cpm_uart/cpm_uart_core.c
index b0104ca..43f58dc 100644
--- a/drivers/serial/cpm_uart/cpm_uart_core.c
+++ b/drivers/serial/cpm_uart/cpm_uart_core.c
@@ -42,6 +42,7 @@
 #include <linux/bootmem.h>
 #include <linux/dma-mapping.h>
 #include <linux/fs_uart_pd.h>
+#include <linux/of_platform.h>
 
 #include <asm/io.h>
 #include <asm/irq.h>
@@ -49,10 +50,6 @@
 #include <asm/fs_pd.h>
 #include <asm/udbg.h>
 
-#ifdef CONFIG_PPC_CPM_NEW_BINDING
-#include <linux/of_platform.h>
-#endif
-
 #if defined(CONFIG_SERIAL_CPM_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
 #define SUPPORT_SYSRQ
 #endif
@@ -72,59 +69,6 @@ static void cpm_uart_initbd(struct uart_cpm_port *pinfo);
 
 /**************************************************************/
 
-#ifndef CONFIG_PPC_CPM_NEW_BINDING
-/* Track which ports are configured as uarts */
-int cpm_uart_port_map[UART_NR];
-/* How many ports did we config as uarts */
-int cpm_uart_nr;
-
-/* Place-holder for board-specific stuff */
-struct platform_device* __attribute__ ((weak)) __init
-early_uart_get_pdev(int index)
-{
-	return NULL;
-}
-
-
-static void cpm_uart_count(void)
-{
-	cpm_uart_nr = 0;
-#ifdef CONFIG_SERIAL_CPM_SMC1
-	cpm_uart_port_map[cpm_uart_nr++] = UART_SMC1;
-#endif
-#ifdef CONFIG_SERIAL_CPM_SMC2
-	cpm_uart_port_map[cpm_uart_nr++] = UART_SMC2;
-#endif
-#ifdef CONFIG_SERIAL_CPM_SCC1
-	cpm_uart_port_map[cpm_uart_nr++] = UART_SCC1;
-#endif
-#ifdef CONFIG_SERIAL_CPM_SCC2
-	cpm_uart_port_map[cpm_uart_nr++] = UART_SCC2;
-#endif
-#ifdef CONFIG_SERIAL_CPM_SCC3
-	cpm_uart_port_map[cpm_uart_nr++] = UART_SCC3;
-#endif
-#ifdef CONFIG_SERIAL_CPM_SCC4
-	cpm_uart_port_map[cpm_uart_nr++] = UART_SCC4;
-#endif
-}
-
-/* Get UART number by its id */
-static int cpm_uart_id2nr(int id)
-{
-	int i;
-	if (id < UART_NR) {
-		for (i=0; i<UART_NR; i++) {
-			if (cpm_uart_port_map[i] == id)
-				return i;
-		}
-	}
-
-	/* not found or invalid argument */
-	return -1;
-}
-#endif
-
 /*
  * Check, if transmit buffers are processed
 */
@@ -935,7 +879,6 @@ static struct uart_ops cpm_uart_pops = {
 	.verify_port	= cpm_uart_verify_port,
 };
 
-#ifdef CONFIG_PPC_CPM_NEW_BINDING
 struct uart_cpm_port cpm_uart_ports[UART_NR];
 
 static int cpm_uart_init_port(struct device_node *np,
@@ -1012,153 +955,6 @@ out_mem:
 	return ret;
 }
 
-#else
-
-struct uart_cpm_port cpm_uart_ports[UART_NR] = {
-	[UART_SMC1] = {
-		.port = {
-			.irq		= SMC1_IRQ,
-			.ops		= &cpm_uart_pops,
-			.iotype		= UPIO_MEM,
-			.lock		= __SPIN_LOCK_UNLOCKED(cpm_uart_ports[UART_SMC1].port.lock),
-		},
-		.flags = FLAG_SMC,
-		.tx_nrfifos = TX_NUM_FIFO,
-		.tx_fifosize = TX_BUF_SIZE,
-		.rx_nrfifos = RX_NUM_FIFO,
-		.rx_fifosize = RX_BUF_SIZE,
-		.set_lineif = smc1_lineif,
-	},
-	[UART_SMC2] = {
-		.port = {
-			.irq		= SMC2_IRQ,
-			.ops		= &cpm_uart_pops,
-			.iotype		= UPIO_MEM,
-			.lock		= __SPIN_LOCK_UNLOCKED(cpm_uart_ports[UART_SMC2].port.lock),
-		},
-		.flags = FLAG_SMC,
-		.tx_nrfifos = TX_NUM_FIFO,
-		.tx_fifosize = TX_BUF_SIZE,
-		.rx_nrfifos = RX_NUM_FIFO,
-		.rx_fifosize = RX_BUF_SIZE,
-		.set_lineif = smc2_lineif,
-#ifdef CONFIG_SERIAL_CPM_ALT_SMC2
-		.is_portb = 1,
-#endif
-	},
-	[UART_SCC1] = {
-		.port = {
-			.irq		= SCC1_IRQ,
-			.ops		= &cpm_uart_pops,
-			.iotype		= UPIO_MEM,
-			.lock		= __SPIN_LOCK_UNLOCKED(cpm_uart_ports[UART_SCC1].port.lock),
-		},
-		.tx_nrfifos = TX_NUM_FIFO,
-		.tx_fifosize = TX_BUF_SIZE,
-		.rx_nrfifos = RX_NUM_FIFO,
-		.rx_fifosize = RX_BUF_SIZE,
-		.set_lineif = scc1_lineif,
-		.wait_closing = SCC_WAIT_CLOSING,
-	},
-	[UART_SCC2] = {
-		.port = {
-			.irq		= SCC2_IRQ,
-			.ops		= &cpm_uart_pops,
-			.iotype		= UPIO_MEM,
-			.lock		= __SPIN_LOCK_UNLOCKED(cpm_uart_ports[UART_SCC2].port.lock),
-		},
-		.tx_nrfifos = TX_NUM_FIFO,
-		.tx_fifosize = TX_BUF_SIZE,
-		.rx_nrfifos = RX_NUM_FIFO,
-		.rx_fifosize = RX_BUF_SIZE,
-		.set_lineif = scc2_lineif,
-		.wait_closing = SCC_WAIT_CLOSING,
-	},
-	[UART_SCC3] = {
-		.port = {
-			.irq		= SCC3_IRQ,
-			.ops		= &cpm_uart_pops,
-			.iotype		= UPIO_MEM,
-			.lock		= __SPIN_LOCK_UNLOCKED(cpm_uart_ports[UART_SCC3].port.lock),
-		},
-		.tx_nrfifos = TX_NUM_FIFO,
-		.tx_fifosize = TX_BUF_SIZE,
-		.rx_nrfifos = RX_NUM_FIFO,
-		.rx_fifosize = RX_BUF_SIZE,
-		.set_lineif = scc3_lineif,
-		.wait_closing = SCC_WAIT_CLOSING,
-	},
-	[UART_SCC4] = {
-		.port = {
-			.irq		= SCC4_IRQ,
-			.ops		= &cpm_uart_pops,
-			.iotype		= UPIO_MEM,
-			.lock		= __SPIN_LOCK_UNLOCKED(cpm_uart_ports[UART_SCC4].port.lock),
-		},
-		.tx_nrfifos = TX_NUM_FIFO,
-		.tx_fifosize = TX_BUF_SIZE,
-		.rx_nrfifos = RX_NUM_FIFO,
-		.rx_fifosize = RX_BUF_SIZE,
-		.set_lineif = scc4_lineif,
-		.wait_closing = SCC_WAIT_CLOSING,
-	},
-};
-
-int cpm_uart_drv_get_platform_data(struct platform_device *pdev, int is_con)
-{
-	struct resource *r;
-	struct fs_uart_platform_info *pdata = pdev->dev.platform_data;
-	int idx;	/* It is UART_SMCx or UART_SCCx index */
-	struct uart_cpm_port *pinfo;
-	int line;
-	u32 mem, pram;
-
-        idx = pdata->fs_no = fs_uart_get_id(pdata);
-
-	line = cpm_uart_id2nr(idx);
-	if(line < 0) {
-		printk(KERN_ERR"%s(): port %d is not registered", __func__, idx);
-		return -EINVAL;
-	}
-
-	pinfo = (struct uart_cpm_port *) &cpm_uart_ports[idx];
-
-	pinfo->brg = pdata->brg;
-
-	if (!is_con) {
-		pinfo->port.line = line;
-		pinfo->port.flags = UPF_BOOT_AUTOCONF;
-	}
-
-	if (!(r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "regs")))
-		return -EINVAL;
-	mem = (u32)ioremap(r->start, r->end - r->start + 1);
-
-	if (!(r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "pram")))
-		return -EINVAL;
-	pram = (u32)ioremap(r->start, r->end - r->start + 1);
-
-	if(idx > fsid_smc2_uart) {
-		pinfo->sccp = (scc_t *)mem;
-		pinfo->sccup = (scc_uart_t *)pram;
-	} else {
-		pinfo->smcp = (smc_t *)mem;
-		pinfo->smcup = (smc_uart_t *)pram;
-	}
-	pinfo->tx_nrfifos = pdata->tx_num_fifo;
-	pinfo->tx_fifosize = pdata->tx_buf_size;
-
-	pinfo->rx_nrfifos = pdata->rx_num_fifo;
-	pinfo->rx_fifosize = pdata->rx_buf_size;
-
-	pinfo->port.uartclk = pdata->uart_clk;
-	pinfo->port.mapbase = (unsigned long)mem;
-	pinfo->port.irq = platform_get_irq(pdev, 0);
-
-	return 0;
-}
-#endif
-
 #ifdef CONFIG_SERIAL_CPM_CONSOLE
 /*
  *	Print a string to the serial port trying not to disturb
@@ -1169,12 +965,7 @@ int cpm_uart_drv_get_platform_data(struct platform_device *pdev, int is_con)
 static void cpm_uart_console_write(struct console *co, const char *s,
 				   u_int count)
 {
-#ifdef CONFIG_PPC_CPM_NEW_BINDING
 	struct uart_cpm_port *pinfo = &cpm_uart_ports[co->index];
-#else
-	struct uart_cpm_port *pinfo =
-	    &cpm_uart_ports[cpm_uart_port_map[co->index]];
-#endif
 	unsigned int i;
 	cbd_t __iomem *bdp, *bdbase;
 	unsigned char *cp;
@@ -1252,7 +1043,6 @@ static int __init cpm_uart_console_setup(struct console *co, char *options)
 	struct uart_cpm_port *pinfo;
 	struct uart_port *port;
 
-#ifdef CONFIG_PPC_CPM_NEW_BINDING
 	struct device_node *np = NULL;
 	int i = 0;
 
@@ -1284,35 +1074,6 @@ static int __init cpm_uart_console_setup(struct console *co, char *options)
 	if (ret)
 		return ret;
 
-#else
-
-	struct fs_uart_platform_info *pdata;
-	struct platform_device* pdev = early_uart_get_pdev(co->index);
-
-	if (!pdev) {
-		pr_info("cpm_uart: console: compat mode\n");
-		/* compatibility - will be cleaned up */
-		cpm_uart_init_portdesc();
-	}
-
-	port =
-	    (struct uart_port *)&cpm_uart_ports[cpm_uart_port_map[co->index]];
-	pinfo = (struct uart_cpm_port *)port;
-	if (!pdev) {
-		if (pinfo->set_lineif)
-			pinfo->set_lineif(pinfo);
-	} else {
-		pdata = pdev->dev.platform_data;
-		if (pdata)
-			if (pdata->init_ioports)
-				pdata->init_ioports(pdata);
-
-		cpm_uart_drv_get_platform_data(pdev, 1);
-	}
-
-	pinfo->flags |= FLAG_CONSOLE;
-#endif
-
 	if (options) {
 		uart_parse_options(options, &baud, &parity, &bits, &flow);
 	} else {
@@ -1386,7 +1147,6 @@ static struct uart_driver cpm_reg = {
 	.nr		= UART_NR,
 };
 
-#ifdef CONFIG_PPC_CPM_NEW_BINDING
 static int probe_index;
 
 static int __devinit cpm_uart_probe(struct of_device *ofdev,
@@ -1457,135 +1217,6 @@ static void __exit cpm_uart_exit(void)
 	of_unregister_platform_driver(&cpm_uart_driver);
 	uart_unregister_driver(&cpm_reg);
 }
-#else
-static int cpm_uart_drv_probe(struct device *dev)
-{
-	struct platform_device  *pdev = to_platform_device(dev);
-	struct fs_uart_platform_info *pdata;
-	int ret = -ENODEV;
-
-	if(!pdev) {
-		printk(KERN_ERR"CPM UART: platform data missing!\n");
-		return ret;
-	}
-
-	pdata = pdev->dev.platform_data;
-
-	if ((ret = cpm_uart_drv_get_platform_data(pdev, 0)))
-		return ret;
-
-	pr_debug("cpm_uart_drv_probe: Adding CPM UART %d\n", cpm_uart_id2nr(pdata->fs_no));
-
-	if (pdata->init_ioports)
-                pdata->init_ioports(pdata);
-
-	ret = uart_add_one_port(&cpm_reg, &cpm_uart_ports[pdata->fs_no].port);
-
-        return ret;
-}
-
-static int cpm_uart_drv_remove(struct device *dev)
-{
-	struct platform_device  *pdev = to_platform_device(dev);
-	struct fs_uart_platform_info *pdata = pdev->dev.platform_data;
-
-	pr_debug("cpm_uart_drv_remove: Removing CPM UART %d\n",
-			cpm_uart_id2nr(pdata->fs_no));
-
-        uart_remove_one_port(&cpm_reg, &cpm_uart_ports[pdata->fs_no].port);
-        return 0;
-}
-
-static struct device_driver cpm_smc_uart_driver = {
-        .name   = "fsl-cpm-smc:uart",
-        .bus    = &platform_bus_type,
-        .probe  = cpm_uart_drv_probe,
-        .remove = cpm_uart_drv_remove,
-};
-
-static struct device_driver cpm_scc_uart_driver = {
-        .name   = "fsl-cpm-scc:uart",
-        .bus    = &platform_bus_type,
-        .probe  = cpm_uart_drv_probe,
-        .remove = cpm_uart_drv_remove,
-};
-
-/*
-   This is supposed to match uart devices on platform bus,
-   */
-static int match_is_uart (struct device* dev, void* data)
-{
-	struct platform_device* pdev = container_of(dev, struct platform_device, dev);
-	int ret = 0;
-	/* this was setfunc as uart */
-	if(strstr(pdev->name,":uart")) {
-		ret = 1;
-	}
-	return ret;
-}
-
-
-static int cpm_uart_init(void) {
-
-	int ret;
-	int i;
-	struct device *dev;
-	printk(KERN_INFO "Serial: CPM driver $Revision: 0.02 $\n");
-
-	/* lookup the bus for uart devices */
-	dev = bus_find_device(&platform_bus_type, NULL, 0, match_is_uart);
-
-	/* There are devices on the bus - all should be OK  */
-	if (dev) {
-		cpm_uart_count();
-		cpm_reg.nr = cpm_uart_nr;
-
-		if (!(ret = uart_register_driver(&cpm_reg))) {
-			if ((ret = driver_register(&cpm_smc_uart_driver))) {
-				uart_unregister_driver(&cpm_reg);
-				return ret;
-			}
-			if ((ret = driver_register(&cpm_scc_uart_driver))) {
-				driver_unregister(&cpm_scc_uart_driver);
-				uart_unregister_driver(&cpm_reg);
-			}
-		}
-	} else {
-	/* No capable platform devices found - falling back to legacy mode */
-		pr_info("cpm_uart: WARNING: no UART devices found on platform bus!\n");
-		pr_info(
-		"cpm_uart: the driver will guess configuration, but this mode is no longer supported.\n");
-
-		/* Don't run this again, if the console driver did it already */
-		if (cpm_uart_nr == 0)
-			cpm_uart_init_portdesc();
-
-		cpm_reg.nr = cpm_uart_nr;
-		ret = uart_register_driver(&cpm_reg);
-
-		if (ret)
-			return ret;
-
-		for (i = 0; i < cpm_uart_nr; i++) {
-			int con = cpm_uart_port_map[i];
-			cpm_uart_ports[con].port.line = i;
-			cpm_uart_ports[con].port.flags = UPF_BOOT_AUTOCONF;
-			if (cpm_uart_ports[con].set_lineif)
-				cpm_uart_ports[con].set_lineif(&cpm_uart_ports[con]);
-			uart_add_one_port(&cpm_reg, &cpm_uart_ports[con].port);
-		}
-
-	}
-	return ret;
-}
-
-static void __exit cpm_uart_exit(void)
-{
-	driver_unregister(&cpm_scc_uart_driver);
-	driver_unregister(&cpm_smc_uart_driver);
-	uart_unregister_driver(&cpm_reg);
-}
-#endif
 
 module_init(cpm_uart_init);
 module_exit(cpm_uart_exit);
diff --git a/drivers/serial/cpm_uart/cpm_uart_cpm1.c b/drivers/serial/cpm_uart/cpm_uart_cpm1.c
index bec0c97..0f0aff0 100644
--- a/drivers/serial/cpm_uart/cpm_uart_cpm1.c
+++ b/drivers/serial/cpm_uart/cpm_uart_cpm1.c
@@ -51,7 +51,6 @@
 
 /**************************************************************/
 
-#ifdef CONFIG_PPC_CPM_NEW_BINDING
 void cpm_line_cr_cmd(struct uart_cpm_port *port, int cmd)
 {
 	cpm_command(port->command, cmd);
@@ -68,75 +67,6 @@ void cpm_uart_unmap_pram(struct uart_cpm_port *port, void __iomem *pram)
 	iounmap(pram);
 }
 
-#else
-void cpm_line_cr_cmd(struct uart_cpm_port *port, int cmd)
-{
-	ushort val;
-	int line = port - cpm_uart_ports;
-	volatile cpm8xx_t *cp = cpmp;
-
-	switch (line) {
-	case UART_SMC1:
-		val = mk_cr_cmd(CPM_CR_CH_SMC1, cmd) | CPM_CR_FLG;
-		break;
-	case UART_SMC2:
-		val = mk_cr_cmd(CPM_CR_CH_SMC2, cmd) | CPM_CR_FLG;
-		break;
-	case UART_SCC1:
-		val = mk_cr_cmd(CPM_CR_CH_SCC1, cmd) | CPM_CR_FLG;
-		break;
-	case UART_SCC2:
-		val = mk_cr_cmd(CPM_CR_CH_SCC2, cmd) | CPM_CR_FLG;
-		break;
-	case UART_SCC3:
-		val = mk_cr_cmd(CPM_CR_CH_SCC3, cmd) | CPM_CR_FLG;
-		break;
-	case UART_SCC4:
-		val = mk_cr_cmd(CPM_CR_CH_SCC4, cmd) | CPM_CR_FLG;
-		break;
-	default:
-		return;
-
-	}
-	cp->cp_cpcr = val;
-	while (cp->cp_cpcr & CPM_CR_FLG) ;
-}
-
-void smc1_lineif(struct uart_cpm_port *pinfo)
-{
-	pinfo->brg = 1;
-}
-
-void smc2_lineif(struct uart_cpm_port *pinfo)
-{
-	pinfo->brg = 2;
-}
-
-void scc1_lineif(struct uart_cpm_port *pinfo)
-{
-	/* XXX SCC1: insert port configuration here */
-	pinfo->brg = 1;
-}
-
-void scc2_lineif(struct uart_cpm_port *pinfo)
-{
-	/* XXX SCC2: insert port configuration here */
-	pinfo->brg = 2;
-}
-
-void scc3_lineif(struct uart_cpm_port *pinfo)
-{
-	/* XXX SCC3: insert port configuration here */
-	pinfo->brg = 3;
-}
-
-void scc4_lineif(struct uart_cpm_port *pinfo)
-{
-	/* XXX SCC4: insert port configuration here */
-	pinfo->brg = 4;
-}
-#endif
-
 /*
  * Allocate DP-Ram and memory buffers. We need to allocate a transmit and
  * receive buffer descriptors from dual port ram, and a character
@@ -205,101 +135,3 @@ void cpm_uart_freebuf(struct uart_cpm_port *pinfo)
 
 	cpm_dpfree(pinfo->dp_addr);
 }
-
-#ifndef CONFIG_PPC_CPM_NEW_BINDING
-/* Setup any dynamic params in the uart desc */
-int cpm_uart_init_portdesc(void)
-{
-	pr_debug("CPM uart[-]:init portdesc\n");
-
-	cpm_uart_nr = 0;
-#ifdef CONFIG_SERIAL_CPM_SMC1
-	cpm_uart_ports[UART_SMC1].smcp = &cpmp->cp_smc[0];
-/*
- *  Is SMC1 being relocated?
- */
-# ifdef CONFIG_I2C_SPI_SMC1_UCODE_PATCH
-	cpm_uart_ports[UART_SMC1].smcup =
-	    (smc_uart_t *) & cpmp->cp_dparam[0x3C0];
-# else
-	cpm_uart_ports[UART_SMC1].smcup =
-	    (smc_uart_t *) & cpmp->cp_dparam[PROFF_SMC1];
-# endif
-	cpm_uart_ports[UART_SMC1].port.mapbase =
-	    (unsigned long)&cpmp->cp_smc[0];
-	cpm_uart_ports[UART_SMC1].smcp->smc_smcm |= (SMCM_RX | SMCM_TX);
-	cpm_uart_ports[UART_SMC1].smcp->smc_smcmr &= ~(SMCMR_REN | SMCMR_TEN);
-	cpm_uart_ports[UART_SMC1].port.uartclk = uart_clock();
-	cpm_uart_port_map[cpm_uart_nr++] = UART_SMC1;
-#endif
-
-#ifdef CONFIG_SERIAL_CPM_SMC2
-	cpm_uart_ports[UART_SMC2].smcp = &cpmp->cp_smc[1];
-	cpm_uart_ports[UART_SMC2].smcup =
-	    (smc_uart_t *) & cpmp->cp_dparam[PROFF_SMC2];
-	cpm_uart_ports[UART_SMC2].port.mapbase =
-	    (unsigned long)&cpmp->cp_smc[1];
-	cpm_uart_ports[UART_SMC2].smcp->smc_smcm |= (SMCM_RX | SMCM_TX);
-	cpm_uart_ports[UART_SMC2].smcp->smc_smcmr &= ~(SMCMR_REN | SMCMR_TEN);
-	cpm_uart_ports[UART_SMC2].port.uartclk = uart_clock();
-	cpm_uart_port_map[cpm_uart_nr++] = UART_SMC2;
-#endif
-
-#ifdef CONFIG_SERIAL_CPM_SCC1
-	cpm_uart_ports[UART_SCC1].sccp = &cpmp->cp_scc[0];
-	cpm_uart_ports[UART_SCC1].sccup =
-	    (scc_uart_t *) & cpmp->cp_dparam[PROFF_SCC1];
-	cpm_uart_ports[UART_SCC1].port.mapbase =
-	    (unsigned long)&cpmp->cp_scc[0];
-	cpm_uart_ports[UART_SCC1].sccp->scc_sccm &=
-	    ~(UART_SCCM_TX | UART_SCCM_RX);
-	cpm_uart_ports[UART_SCC1].sccp->scc_gsmrl &=
-	    ~(SCC_GSMRL_ENR | SCC_GSMRL_ENT);
-	cpm_uart_ports[UART_SCC1].port.uartclk = uart_clock();
-	cpm_uart_port_map[cpm_uart_nr++] = UART_SCC1;
-#endif
-
-#ifdef CONFIG_SERIAL_CPM_SCC2
-	cpm_uart_ports[UART_SCC2].sccp = &cpmp->cp_scc[1];
-	cpm_uart_ports[UART_SCC2].sccup =
-	    (scc_uart_t *) & cpmp->cp_dparam[PROFF_SCC2];
-	cpm_uart_ports[UART_SCC2].port.mapbase =
-	    (unsigned long)&cpmp->cp_scc[1];
-	cpm_uart_ports[UART_SCC2].sccp->scc_sccm &=
-	    ~(UART_SCCM_TX | UART_SCCM_RX);
-	cpm_uart_ports[UART_SCC2].sccp->scc_gsmrl &=
-	    ~(SCC_GSMRL_ENR | SCC_GSMRL_ENT);
-	cpm_uart_ports[UART_SCC2].port.uartclk = uart_clock();
-	cpm_uart_port_map[cpm_uart_nr++] = UART_SCC2;
-#endif
-
-#ifdef CONFIG_SERIAL_CPM_SCC3
-	cpm_uart_ports[UART_SCC3].sccp = &cpmp->cp_scc[2];
-	cpm_uart_ports[UART_SCC3].sccup =
-	    (scc_uart_t *) & cpmp->cp_dparam[PROFF_SCC3];
-	cpm_uart_ports[UART_SCC3].port.mapbase =
-	    (unsigned long)&cpmp->cp_scc[2];
-	cpm_uart_ports[UART_SCC3].sccp->scc_sccm &=
-	    ~(UART_SCCM_TX | UART_SCCM_RX);
-	cpm_uart_ports[UART_SCC3].sccp->scc_gsmrl &=
-	    ~(SCC_GSMRL_ENR | SCC_GSMRL_ENT);
-	cpm_uart_ports[UART_SCC3].port.uartclk = uart_clock();
-	cpm_uart_port_map[cpm_uart_nr++] = UART_SCC3;
-#endif
-
-#ifdef CONFIG_SERIAL_CPM_SCC4
-	cpm_uart_ports[UART_SCC4].sccp = &cpmp->cp_scc[3];
-	cpm_uart_ports[UART_SCC4].sccup =
-	    (scc_uart_t *) & cpmp->cp_dparam[PROFF_SCC4];
-	cpm_uart_ports[UART_SCC4].port.mapbase =
-	    (unsigned long)&cpmp->cp_scc[3];
-	cpm_uart_ports[UART_SCC4].sccp->scc_sccm &=
-	    ~(UART_SCCM_TX | UART_SCCM_RX);
-	cpm_uart_ports[UART_SCC4].sccp->scc_gsmrl &=
-	    ~(SCC_GSMRL_ENR | SCC_GSMRL_ENT);
-	cpm_uart_ports[UART_SCC4].port.uartclk = uart_clock();
-	cpm_uart_port_map[cpm_uart_nr++] = UART_SCC4;
-#endif
-	return 0;
-}
-#endif
diff --git a/drivers/serial/cpm_uart/cpm_uart_cpm1.h b/drivers/serial/cpm_uart/cpm_uart_cpm1.h
index b805698..10eecd6 100644
--- a/drivers/serial/cpm_uart/cpm_uart_cpm1.h
+++ b/drivers/serial/cpm_uart/cpm_uart_cpm1.h
@@ -12,16 +12,6 @@
 
 #include <asm/cpm1.h>
 
-/* defines for IRQs */
-#ifndef CONFIG_PPC_CPM_NEW_BINDING
-#define SMC1_IRQ	(CPM_IRQ_OFFSET + CPMVEC_SMC1)
-#define SMC2_IRQ	(CPM_IRQ_OFFSET + CPMVEC_SMC2)
-#define SCC1_IRQ	(CPM_IRQ_OFFSET + CPMVEC_SCC1)
-#define SCC2_IRQ	(CPM_IRQ_OFFSET + CPMVEC_SCC2)
-#define SCC3_IRQ	(CPM_IRQ_OFFSET + CPMVEC_SCC3)
-#define SCC4_IRQ	(CPM_IRQ_OFFSET + CPMVEC_SCC4)
-#endif
-
 static inline void cpm_set_brg(int brg, int baud)
 {
 	cpm_setbrg(brg, baud);
diff --git a/drivers/serial/cpm_uart/cpm_uart_cpm2.c b/drivers/serial/cpm_uart/cpm_uart_cpm2.c
index e53524c..b8db4d3 100644
--- a/drivers/serial/cpm_uart/cpm_uart_cpm2.c
+++ b/drivers/serial/cpm_uart/cpm_uart_cpm2.c
@@ -41,9 +41,7 @@
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/fs_pd.h>
-#ifdef CONFIG_PPC_CPM_NEW_BINDING
 #include <asm/prom.h>
-#endif
 
 #include <linux/serial_core.h>
 #include <linux/kernel.h>
@@ -52,7 +50,6 @@
 
 /**************************************************************/
 
-#ifdef CONFIG_PPC_CPM_NEW_BINDING
 void cpm_line_cr_cmd(struct uart_cpm_port *port, int cmd)
 {
 	cpm_command(port->command, cmd);
@@ -106,172 +103,6 @@ void cpm_uart_unmap_pram(struct uart_cpm_port *port, void __iomem *pram)
 		iounmap(pram);
 }
 
-#else
-void cpm_line_cr_cmd(struct uart_cpm_port *port, int cmd)
-{
-	ulong val;
-	int line = port - cpm_uart_ports;
-	volatile cpm_cpm2_t *cp = cpm2_map(im_cpm);
-
-
-	switch (line) {
-	case UART_SMC1:
-		val = mk_cr_cmd(CPM_CR_SMC1_PAGE, CPM_CR_SMC1_SBLOCK, 0,
-				cmd) | CPM_CR_FLG;
-		break;
-	case UART_SMC2:
-		val = mk_cr_cmd(CPM_CR_SMC2_PAGE, CPM_CR_SMC2_SBLOCK, 0,
-				cmd) | CPM_CR_FLG;
-		break;
-	case UART_SCC1:
-		val = mk_cr_cmd(CPM_CR_SCC1_PAGE, CPM_CR_SCC1_SBLOCK, 0,
-				cmd) | CPM_CR_FLG;
-		break;
-	case UART_SCC2:
-		val = mk_cr_cmd(CPM_CR_SCC2_PAGE, CPM_CR_SCC2_SBLOCK, 0,
-				cmd) | CPM_CR_FLG;
-		break;
-	case UART_SCC3:
-		val = mk_cr_cmd(CPM_CR_SCC3_PAGE, CPM_CR_SCC3_SBLOCK, 0,
-				cmd) | CPM_CR_FLG;
-		break;
-	case UART_SCC4:
-		val = mk_cr_cmd(CPM_CR_SCC4_PAGE, CPM_CR_SCC4_SBLOCK, 0,
-				cmd) | CPM_CR_FLG;
-		break;
-	default:
-		return;
-
-	}
-	cp->cp_cpcr = val;
-	while (cp->cp_cpcr & CPM_CR_FLG) ;
-
-	cpm2_unmap(cp);
-}
-
-void smc1_lineif(struct uart_cpm_port *pinfo)
-{
-	volatile iop_cpm2_t *io = cpm2_map(im_ioport);
-	volatile cpmux_t *cpmux = cpm2_map(im_cpmux);
-
-	/* SMC1 is only on port D */
-	io->iop_ppard |= 0x00c00000;
-	io->iop_pdird |= 0x00400000;
-	io->iop_pdird &= ~0x00800000;
-	io->iop_psord &= ~0x00c00000;
-
-	/* Wire BRG1 to SMC1 */
-	cpmux->cmx_smr &= 0x0f;
-	pinfo->brg = 1;
-
-	cpm2_unmap(cpmux);
-	cpm2_unmap(io);
-}
-
-void smc2_lineif(struct uart_cpm_port *pinfo)
-{
-	volatile iop_cpm2_t *io = cpm2_map(im_ioport);
-	volatile cpmux_t *cpmux = cpm2_map(im_cpmux);
-
-	/* SMC2 is only on port A */
-	io->iop_ppara |= 0x00c00000;
-	io->iop_pdira |= 0x00400000;
-	io->iop_pdira &= ~0x00800000;
-	io->iop_psora &= ~0x00c00000;
-
-	/* Wire BRG2 to SMC2 */
-	cpmux->cmx_smr &= 0xf0;
-	pinfo->brg = 2;
-
-	cpm2_unmap(cpmux);
-	cpm2_unmap(io);
-}
-
-void scc1_lineif(struct uart_cpm_port *pinfo)
-{
-	volatile iop_cpm2_t *io = cpm2_map(im_ioport);
-	volatile cpmux_t *cpmux = cpm2_map(im_cpmux);
-
-	/* Use Port D for SCC1 instead of other functions.  */
-	io->iop_ppard |= 0x00000003;
-	io->iop_psord &= ~0x00000001;	/* Rx */
-	io->iop_psord |= 0x00000002;	/* Tx */
-	io->iop_pdird &= ~0x00000001;	/* Rx */
-	io->iop_pdird |= 0x00000002;	/* Tx */
-
-	/* Wire BRG1 to SCC1 */
-	cpmux->cmx_scr &= 0x00ffffff;
-	cpmux->cmx_scr |= 0x00000000;
-	pinfo->brg = 1;
-
-	cpm2_unmap(cpmux);
-	cpm2_unmap(io);
-}
-
-void scc2_lineif(struct uart_cpm_port *pinfo)
-{
-	/*
-	 * STx GP3 uses the SCC2 secondary option pin assignment
-	 * which this driver doesn't account for in the static
-	 * pin assignments. This kind of board specific info
-	 * really has to get out of the driver so boards can
-	 * be supported in a sane fashion.
-	 */
-	volatile cpmux_t *cpmux = cpm2_map(im_cpmux);
-#ifndef CONFIG_STX_GP3
-	volatile iop_cpm2_t *io = cpm2_map(im_ioport);
-
-	io->iop_pparb |= 0x008b0000;
-	io->iop_pdirb |= 0x00880000;
-	io->iop_psorb |= 0x00880000;
-	io->iop_pdirb &= ~0x00030000;
-	io->iop_psorb &= ~0x00030000;
-#endif
-	cpmux->cmx_scr &= 0xff00ffff;
-	cpmux->cmx_scr |= 0x00090000;
-	pinfo->brg = 2;
-
-	cpm2_unmap(cpmux);
-	cpm2_unmap(io);
-}
-
-void scc3_lineif(struct uart_cpm_port *pinfo)
-{
-	volatile iop_cpm2_t *io = cpm2_map(im_ioport);
-	volatile cpmux_t *cpmux = cpm2_map(im_cpmux);
-
-	io->iop_pparb |= 0x008b0000;
-	io->iop_pdirb |= 0x00880000;
-	io->iop_psorb |= 0x00880000;
-	io->iop_pdirb &= ~0x00030000;
-	io->iop_psorb &= ~0x00030000;
-	cpmux->cmx_scr &= 0xffff00ff;
-	cpmux->cmx_scr |= 0x00001200;
-	pinfo->brg = 3;
-
-	cpm2_unmap(cpmux);
-	cpm2_unmap(io);
-}
-
-void scc4_lineif(struct uart_cpm_port *pinfo)
-{
-	volatile iop_cpm2_t *io = cpm2_map(im_ioport);
-	volatile cpmux_t *cpmux = cpm2_map(im_cpmux);
-
-	io->iop_ppard |= 0x00000600;
-	io->iop_psord &= ~0x00000600;	/* Tx/Rx */
-	io->iop_pdird &= ~0x00000200;	/* Rx */
-	io->iop_pdird |= 0x00000400;	/* Tx */
-
-	cpmux->cmx_scr &= 0xffffff00;
-	cpmux->cmx_scr |= 0x0000001b;
-	pinfo->brg = 4;
-
-	cpm2_unmap(cpmux);
-	cpm2_unmap(io);
-}
-#endif
-
 /*
  * Allocate DP-Ram and memory buffers. We need to allocate a transmit and
  * receive buffer descriptors from dual port ram, and a character
@@ -340,111 +171,3 @@ void cpm_uart_freebuf(struct uart_cpm_port *pinfo)
 
 	cpm_dpfree(pinfo->dp_addr);
 }
-
-#ifndef CONFIG_PPC_CPM_NEW_BINDING
-/* Setup any dynamic params in the uart desc */
-int cpm_uart_init_portdesc(void)
-{
-#if defined(CONFIG_SERIAL_CPM_SMC1) || defined(CONFIG_SERIAL_CPM_SMC2)
-	u16 *addr;
-#endif
-	pr_debug("CPM uart[-]:init portdesc\n");
-
-	cpm_uart_nr = 0;
-#ifdef CONFIG_SERIAL_CPM_SMC1
-	cpm_uart_ports[UART_SMC1].smcp = (smc_t *) cpm2_map(im_smc[0]);
-	cpm_uart_ports[UART_SMC1].port.mapbase =
-	    (unsigned long)cpm_uart_ports[UART_SMC1].smcp;
-
-	cpm_uart_ports[UART_SMC1].smcup =
-	    (smc_uart_t *) cpm2_map_size(im_dprambase[PROFF_SMC1], PROFF_SMC_SIZE);
-	addr = (u16 *)cpm2_map_size(im_dprambase[PROFF_SMC1_BASE], 2);
-	*addr = PROFF_SMC1;
-	cpm2_unmap(addr);
-
-	cpm_uart_ports[UART_SMC1].smcp->smc_smcm |= (SMCM_RX | SMCM_TX);
-	cpm_uart_ports[UART_SMC1].smcp->smc_smcmr &= ~(SMCMR_REN | SMCMR_TEN);
-	cpm_uart_ports[UART_SMC1].port.uartclk = uart_clock();
-	cpm_uart_port_map[cpm_uart_nr++] = UART_SMC1;
-#endif
-
-#ifdef CONFIG_SERIAL_CPM_SMC2
-	cpm_uart_ports[UART_SMC2].smcp = (smc_t *) cpm2_map(im_smc[1]);
-	cpm_uart_ports[UART_SMC2].port.mapbase =
-	    (unsigned long)cpm_uart_ports[UART_SMC2].smcp;
-
-	cpm_uart_ports[UART_SMC2].smcup =
-	    (smc_uart_t *) cpm2_map_size(im_dprambase[PROFF_SMC2], PROFF_SMC_SIZE);
-	addr = (u16 *)cpm2_map_size(im_dprambase[PROFF_SMC2_BASE], 2);
-	*addr = PROFF_SMC2;
-	cpm2_unmap(addr);
-
-	cpm_uart_ports[UART_SMC2].smcp->smc_smcm |= (SMCM_RX | SMCM_TX);
-	cpm_uart_ports[UART_SMC2].smcp->smc_smcmr &= ~(SMCMR_REN | SMCMR_TEN);
-	cpm_uart_ports[UART_SMC2].port.uartclk = uart_clock();
-	cpm_uart_port_map[cpm_uart_nr++] = UART_SMC2;
-#endif
-
-#ifdef CONFIG_SERIAL_CPM_SCC1
-	cpm_uart_ports[UART_SCC1].sccp = (scc_t *) cpm2_map(im_scc[0]);
-	cpm_uart_ports[UART_SCC1].port.mapbase =
-	    (unsigned long)cpm_uart_ports[UART_SCC1].sccp;
-	cpm_uart_ports[UART_SCC1].sccup =
-	    (scc_uart_t *) cpm2_map_size(im_dprambase[PROFF_SCC1], PROFF_SCC_SIZE);
-
-	cpm_uart_ports[UART_SCC1].sccp->scc_sccm &=
-	    ~(UART_SCCM_TX | UART_SCCM_RX);
-	cpm_uart_ports[UART_SCC1].sccp->scc_gsmrl &=
-	    ~(SCC_GSMRL_ENR | SCC_GSMRL_ENT);
-	cpm_uart_ports[UART_SCC1].port.uartclk = uart_clock();
-	cpm_uart_port_map[cpm_uart_nr++] = UART_SCC1;
-#endif
-
-#ifdef CONFIG_SERIAL_CPM_SCC2
-	cpm_uart_ports[UART_SCC2].sccp = (scc_t *) cpm2_map(im_scc[1]);
-	cpm_uart_ports[UART_SCC2].port.mapbase =
-	    (unsigned long)cpm_uart_ports[UART_SCC2].sccp;
-	cpm_uart_ports[UART_SCC2].sccup =
-	    (scc_uart_t *) cpm2_map_size(im_dprambase[PROFF_SCC2], PROFF_SCC_SIZE);
-
-	cpm_uart_ports[UART_SCC2].sccp->scc_sccm &=
-	    ~(UART_SCCM_TX | UART_SCCM_RX);
-	cpm_uart_ports[UART_SCC2].sccp->scc_gsmrl &=
-	    ~(SCC_GSMRL_ENR | SCC_GSMRL_ENT);
-	cpm_uart_ports[UART_SCC2].port.uartclk = uart_clock();
-	cpm_uart_port_map[cpm_uart_nr++] = UART_SCC2;
-#endif
-
-#ifdef CONFIG_SERIAL_CPM_SCC3
-	cpm_uart_ports[UART_SCC3].sccp = (scc_t *) cpm2_map(im_scc[2]);
-	cpm_uart_ports[UART_SCC3].port.mapbase =
-	    (unsigned long)cpm_uart_ports[UART_SCC3].sccp;
-	cpm_uart_ports[UART_SCC3].sccup =
-	    (scc_uart_t *) cpm2_map_size(im_dprambase[PROFF_SCC3], PROFF_SCC_SIZE);
-
-	cpm_uart_ports[UART_SCC3].sccp->scc_sccm &=
-	    ~(UART_SCCM_TX | UART_SCCM_RX);
-	cpm_uart_ports[UART_SCC3].sccp->scc_gsmrl &=
-	    ~(SCC_GSMRL_ENR | SCC_GSMRL_ENT);
-	cpm_uart_ports[UART_SCC3].port.uartclk = uart_clock();
-	cpm_uart_port_map[cpm_uart_nr++] = UART_SCC3;
-#endif
-
-#ifdef CONFIG_SERIAL_CPM_SCC4
-	cpm_uart_ports[UART_SCC4].sccp = (scc_t *) cpm2_map(im_scc[3]);
-	cpm_uart_ports[UART_SCC4].port.mapbase =
-	    (unsigned long)cpm_uart_ports[UART_SCC4].sccp;
-	cpm_uart_ports[UART_SCC4].sccup =
-	    (scc_uart_t *) cpm2_map_size(im_dprambase[PROFF_SCC4], PROFF_SCC_SIZE);
-
-	cpm_uart_ports[UART_SCC4].sccp->scc_sccm &=
-	    ~(UART_SCCM_TX | UART_SCCM_RX);
-	cpm_uart_ports[UART_SCC4].sccp->scc_gsmrl &=
-	    ~(SCC_GSMRL_ENR | SCC_GSMRL_ENT);
-	cpm_uart_ports[UART_SCC4].port.uartclk = uart_clock();
-	cpm_uart_port_map[cpm_uart_nr++] = UART_SCC4;
-#endif
-
-	return 0;
-}
-#endif
diff --git a/drivers/serial/cpm_uart/cpm_uart_cpm2.h b/drivers/serial/cpm_uart/cpm_uart_cpm2.h
index a48b56e..7194c63 100644
--- a/drivers/serial/cpm_uart/cpm_uart_cpm2.h
+++ b/drivers/serial/cpm_uart/cpm_uart_cpm2.h
@@ -12,16 +12,6 @@
 
 #include <asm/cpm2.h>
 
-/* defines for IRQs */
-#ifndef CONFIG_PPC_CPM_NEW_BINDING
-#define SMC1_IRQ	SIU_INT_SMC1
-#define SMC2_IRQ	SIU_INT_SMC2
-#define SCC1_IRQ	SIU_INT_SCC1
-#define SCC2_IRQ	SIU_INT_SCC2
-#define SCC3_IRQ	SIU_INT_SCC3
-#define SCC4_IRQ	SIU_INT_SCC4
-#endif
-
 static inline void cpm_set_brg(int brg, int baud)
 {
 	cpm_setbrg(brg, baud);
-- 
1.5.5.1

[PATCH 3/5] powerpc/cpm: Remove !CONFIG_PPC_CPM_NEW_BINDING code

[Kumar Gala]

Now that arch/ppc is gone we always define CONFIG_PPC_CPM_NEW_BINDING so
we can remove all the code associated with !CONFIG_PPC_CPM_NEW_BINDING.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
---
 include/asm-powerpc/cpm1.h |   20 --------------------
 include/asm-powerpc/cpm2.h |   26 --------------------------
 2 files changed, 0 insertions(+), 46 deletions(-)

diff --git a/include/asm-powerpc/cpm1.h b/include/asm-powerpc/cpm1.h
index 3df4396..2ff7987 100644
--- a/include/asm-powerpc/cpm1.h
+++ b/include/asm-powerpc/cpm1.h
@@ -42,35 +42,15 @@
 
 #define mk_cr_cmd(CH, CMD)	((CMD << 8) | (CH << 4))
 
-#ifndef CONFIG_PPC_CPM_NEW_BINDING
-/* The dual ported RAM is multi-functional.  Some areas can be (and are
- * being) used for microcode.  There is an area that can only be used
- * as data ram for buffer descriptors, which is all we use right now.
- * Currently the first 512 and last 256 bytes are used for microcode.
- */
-#define CPM_DATAONLY_BASE	((uint)0x0800)
-#define CPM_DATAONLY_SIZE	((uint)0x0700)
-#define CPM_DP_NOSPACE		((uint)0x7fffffff)
-#endif
-
 /* Export the base address of the communication processor registers
  * and dual port ram.
  */
 extern cpm8xx_t __iomem *cpmp; /* Pointer to comm processor */
 
-#ifdef CONFIG_PPC_CPM_NEW_BINDING
 #define cpm_dpalloc cpm_muram_alloc
 #define cpm_dpfree cpm_muram_free
 #define cpm_dpram_addr cpm_muram_addr
 #define cpm_dpram_phys cpm_muram_dma
-#else
-extern unsigned long cpm_dpalloc(uint size, uint align);
-extern int cpm_dpfree(unsigned long offset);
-extern unsigned long cpm_dpalloc_fixed(unsigned long offset, uint size, uint align);
-extern void cpm_dpdump(void);
-extern void *cpm_dpram_addr(unsigned long offset);
-extern uint cpm_dpram_phys(u8 *addr);
-#endif
 
 extern void cpm_setbrg(uint brg, uint rate);
 
diff --git a/include/asm-powerpc/cpm2.h b/include/asm-powerpc/cpm2.h
index 4c85ed9..2c7fd9c 100644
--- a/include/asm-powerpc/cpm2.h
+++ b/include/asm-powerpc/cpm2.h
@@ -78,24 +78,6 @@
 #define mk_cr_cmd(PG, SBC, MCN, OP) \
 	((PG << 26) | (SBC << 21) | (MCN << 6) | OP)
 
-#ifndef CONFIG_PPC_CPM_NEW_BINDING
-/* Dual Port RAM addresses.  The first 16K is available for almost
- * any CPM use, so we put the BDs there.  The first 128 bytes are
- * used for SMC1 and SMC2 parameter RAM, so we start allocating
- * BDs above that.  All of this must change when we start
- * downloading RAM microcode.
- */
-#define CPM_DATAONLY_BASE	((uint)128)
-#define CPM_DP_NOSPACE		((uint)0x7fffffff)
-#if defined(CONFIG_8272) || defined(CONFIG_MPC8555)
-#define CPM_DATAONLY_SIZE	((uint)(8 * 1024) - CPM_DATAONLY_BASE)
-#define CPM_FCC_SPECIAL_BASE	((uint)0x00009000)
-#else
-#define CPM_DATAONLY_SIZE	((uint)(16 * 1024) - CPM_DATAONLY_BASE)
-#define CPM_FCC_SPECIAL_BASE	((uint)0x0000b000)
-#endif
-#endif
-
 /* The number of pages of host memory we allocate for CPM.  This is
  * done early in kernel initialization to get physically contiguous
  * pages.
@@ -107,17 +89,9 @@
  */
 extern cpm_cpm2_t __iomem *cpmp; /* Pointer to comm processor */
 
-#ifdef CONFIG_PPC_CPM_NEW_BINDING
 #define cpm_dpalloc cpm_muram_alloc
 #define cpm_dpfree cpm_muram_free
 #define cpm_dpram_addr cpm_muram_addr
-#else
-extern unsigned long cpm_dpalloc(uint size, uint align);
-extern int cpm_dpfree(unsigned long offset);
-extern unsigned long cpm_dpalloc_fixed(unsigned long offset, uint size, uint align);
-extern void cpm_dpdump(void);
-extern void *cpm_dpram_addr(unsigned long offset);
-#endif
 
 extern void cpm_setbrg(uint brg, uint rate);
 extern void cpm2_fastbrg(uint brg, uint rate, int div16);
-- 
1.5.5.1

[PATCH 4/5] fs_enet: Remove !CONFIG_PPC_CPM_NEW_BINDING code

[Kumar Gala]

Now that arch/ppc is gone we always define CONFIG_PPC_CPM_NEW_BINDING so
we can remove all the code associated with !CONFIG_PPC_CPM_NEW_BINDING.

Also fixed some asm/of_platform.h to linux/of_platform.h (and of_device.h)

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
---

Jeff, if this looks ok, its easier if this can go via the powerpc tree.

- k

 drivers/net/fs_enet/Makefile       |    5 -
 drivers/net/fs_enet/fs_enet-main.c |  309 +-----------------------------------
 drivers/net/fs_enet/fs_enet.h      |    4 -
 drivers/net/fs_enet/mac-fcc.c      |   67 +--------
 drivers/net/fs_enet/mac-fec.c      |   23 +---
 drivers/net/fs_enet/mac-scc.c      |   37 +----
 drivers/net/fs_enet/mii-bitbang.c  |  107 -------------
 drivers/net/fs_enet/mii-fec.c      |  144 +-----------------
 include/linux/fs_enet_pd.h         |    4 -
 9 files changed, 5 insertions(+), 695 deletions(-)

diff --git a/drivers/net/fs_enet/Makefile b/drivers/net/fs_enet/Makefile
index 1ffbe07..d4a305e 100644
--- a/drivers/net/fs_enet/Makefile
+++ b/drivers/net/fs_enet/Makefile
@@ -8,12 +8,7 @@ fs_enet-$(CONFIG_FS_ENET_HAS_SCC) += mac-scc.o
 fs_enet-$(CONFIG_FS_ENET_HAS_FEC) += mac-fec.o
 fs_enet-$(CONFIG_FS_ENET_HAS_FCC) += mac-fcc.o
 
-ifeq ($(CONFIG_PPC_CPM_NEW_BINDING),y)
 obj-$(CONFIG_FS_ENET_MDIO_FEC) += mii-fec.o
 obj-$(CONFIG_FS_ENET_MDIO_FCC) += mii-bitbang.o
-else
-fs_enet-$(CONFIG_FS_ENET_MDIO_FEC) += mii-fec.o
-fs_enet-$(CONFIG_FS_ENET_MDIO_FCC) += mii-bitbang.o
-endif
 
 fs_enet-objs := fs_enet-main.o $(fs_enet-m)
diff --git a/drivers/net/fs_enet/fs_enet-main.c b/drivers/net/fs_enet/fs_enet-main.c
index a5baaf5..a9f9aae 100644
--- a/drivers/net/fs_enet/fs_enet-main.c
+++ b/drivers/net/fs_enet/fs_enet-main.c
@@ -36,25 +36,18 @@
 #include <linux/fs.h>
 #include <linux/platform_device.h>
 #include <linux/phy.h>
+#include <linux/of_platform.h>
 
 #include <linux/vmalloc.h>
 #include <asm/pgtable.h>
 #include <asm/irq.h>
 #include <asm/uaccess.h>
 
-#ifdef CONFIG_PPC_CPM_NEW_BINDING
-#include <asm/of_platform.h>
-#endif
 
 #include "fs_enet.h"
 
 /*************************************************/
 
-#ifndef CONFIG_PPC_CPM_NEW_BINDING
-static char version[] __devinitdata =
-    DRV_MODULE_NAME ".c:v" DRV_MODULE_VERSION " (" DRV_MODULE_RELDATE ")" "\n";
-#endif
-
 MODULE_AUTHOR("Pantelis Antoniou <panto@intracom.gr>");
 MODULE_DESCRIPTION("Freescale Ethernet Driver");
 MODULE_LICENSE("GPL");
@@ -957,190 +950,6 @@ static int fs_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
 extern int fs_mii_connect(struct net_device *dev);
 extern void fs_mii_disconnect(struct net_device *dev);
 
-#ifndef CONFIG_PPC_CPM_NEW_BINDING
-static struct net_device *fs_init_instance(struct device *dev,
-		struct fs_platform_info *fpi)
-{
-	struct net_device *ndev = NULL;
-	struct fs_enet_private *fep = NULL;
-	int privsize, i, r, err = 0, registered = 0;
-
-	fpi->fs_no = fs_get_id(fpi);
-	/* guard */
-	if ((unsigned int)fpi->fs_no >= FS_MAX_INDEX)
-		return ERR_PTR(-EINVAL);
-
-	privsize = sizeof(*fep) + (sizeof(struct sk_buff **) *
-			    (fpi->rx_ring + fpi->tx_ring));
-
-	ndev = alloc_etherdev(privsize);
-	if (!ndev) {
-		err = -ENOMEM;
-		goto err;
-	}
-
-	fep = netdev_priv(ndev);
-
-	fep->dev = dev;
-	dev_set_drvdata(dev, ndev);
-	fep->fpi = fpi;
-	if (fpi->init_ioports)
-		fpi->init_ioports((struct fs_platform_info *)fpi);
-
-#ifdef CONFIG_FS_ENET_HAS_FEC
-	if (fs_get_fec_index(fpi->fs_no) >= 0)
-		fep->ops = &fs_fec_ops;
-#endif
-
-#ifdef CONFIG_FS_ENET_HAS_SCC
-	if (fs_get_scc_index(fpi->fs_no) >=0)
-		fep->ops = &fs_scc_ops;
-#endif
-
-#ifdef CONFIG_FS_ENET_HAS_FCC
-	if (fs_get_fcc_index(fpi->fs_no) >= 0)
-		fep->ops = &fs_fcc_ops;
-#endif
-
-	if (fep->ops == NULL) {
-		printk(KERN_ERR DRV_MODULE_NAME
-		       ": %s No matching ops found (%d).\n",
-		       ndev->name, fpi->fs_no);
-		err = -EINVAL;
-		goto err;
-	}
-
-	r = (*fep->ops->setup_data)(ndev);
-	if (r != 0) {
-		printk(KERN_ERR DRV_MODULE_NAME
-		       ": %s setup_data failed\n",
-			ndev->name);
-		err = r;
-		goto err;
-	}
-
-	/* point rx_skbuff, tx_skbuff */
-	fep->rx_skbuff = (struct sk_buff **)&fep[1];
-	fep->tx_skbuff = fep->rx_skbuff + fpi->rx_ring;
-
-	/* init locks */
-	spin_lock_init(&fep->lock);
-	spin_lock_init(&fep->tx_lock);
-
-	/*
-	 * Set the Ethernet address.
-	 */
-	for (i = 0; i < 6; i++)
-		ndev->dev_addr[i] = fpi->macaddr[i];
-
-	r = (*fep->ops->allocate_bd)(ndev);
-
-	if (fep->ring_base == NULL) {
-		printk(KERN_ERR DRV_MODULE_NAME
-		       ": %s buffer descriptor alloc failed (%d).\n", ndev->name, r);
-		err = r;
-		goto err;
-	}
-
-	/*
-	 * Set receive and transmit descriptor base.
-	 */
-	fep->rx_bd_base = fep->ring_base;
-	fep->tx_bd_base = fep->rx_bd_base + fpi->rx_ring;
-
-	/* initialize ring size variables */
-	fep->tx_ring = fpi->tx_ring;
-	fep->rx_ring = fpi->rx_ring;
-
-	/*
-	 * The FEC Ethernet specific entries in the device structure.
-	 */
-	ndev->open = fs_enet_open;
-	ndev->hard_start_xmit = fs_enet_start_xmit;
-	ndev->tx_timeout = fs_timeout;
-	ndev->watchdog_timeo = 2 * HZ;
-	ndev->stop = fs_enet_close;
-	ndev->get_stats = fs_enet_get_stats;
-	ndev->set_multicast_list = fs_set_multicast_list;
-
-#ifdef CONFIG_NET_POLL_CONTROLLER
-	ndev->poll_controller = fs_enet_netpoll;
-#endif
-
-	netif_napi_add(ndev, &fep->napi,
-		       fs_enet_rx_napi, fpi->napi_weight);
-
-	ndev->ethtool_ops = &fs_ethtool_ops;
-	ndev->do_ioctl = fs_ioctl;
-
-	init_timer(&fep->phy_timer_list);
-
-	netif_carrier_off(ndev);
-
-	err = register_netdev(ndev);
-	if (err != 0) {
-		printk(KERN_ERR DRV_MODULE_NAME
-		       ": %s register_netdev failed.\n", ndev->name);
-		goto err;
-	}
-	registered = 1;
-
-
-	return ndev;
-
-err:
-	if (ndev != NULL) {
-		if (registered)
-			unregister_netdev(ndev);
-
-		if (fep && fep->ops) {
-			(*fep->ops->free_bd)(ndev);
-			(*fep->ops->cleanup_data)(ndev);
-		}
-
-		free_netdev(ndev);
-	}
-
-	dev_set_drvdata(dev, NULL);
-
-	return ERR_PTR(err);
-}
-
-static int fs_cleanup_instance(struct net_device *ndev)
-{
-	struct fs_enet_private *fep;
-	const struct fs_platform_info *fpi;
-	struct device *dev;
-
-	if (ndev == NULL)
-		return -EINVAL;
-
-	fep = netdev_priv(ndev);
-	if (fep == NULL)
-		return -EINVAL;
-
-	fpi = fep->fpi;
-
-	unregister_netdev(ndev);
-
-	dma_free_coherent(fep->dev, (fpi->tx_ring + fpi->rx_ring) * sizeof(cbd_t),
-			  (void __force *)fep->ring_base, fep->ring_mem_addr);
-
-	/* reset it */
-	(*fep->ops->cleanup_data)(ndev);
-
-	dev = fep->dev;
-	if (dev != NULL) {
-		dev_set_drvdata(dev, NULL);
-		fep->dev = NULL;
-	}
-
-	free_netdev(ndev);
-
-	return 0;
-}
-#endif
-
 /**************************************************************************************/
 
 /* handy pointer to the immap */
@@ -1167,7 +976,6 @@ static void cleanup_immap(void)
 
 /**************************************************************************************/
 
-#ifdef CONFIG_PPC_CPM_NEW_BINDING
 static int __devinit find_phy(struct device_node *np,
                               struct fs_platform_info *fpi)
 {
@@ -1399,121 +1207,6 @@ static void __exit fs_cleanup(void)
 	of_unregister_platform_driver(&fs_enet_driver);
 	cleanup_immap();
 }
-#else
-static int __devinit fs_enet_probe(struct device *dev)
-{
-	struct net_device *ndev;
-
-	/* no fixup - no device */
-	if (dev->platform_data == NULL) {
-		printk(KERN_INFO "fs_enet: "
-				"probe called with no platform data; "
-				"remove unused devices\n");
-		return -ENODEV;
-	}
-
-	ndev = fs_init_instance(dev, dev->platform_data);
-	if (IS_ERR(ndev))
-		return PTR_ERR(ndev);
-	return 0;
-}
-
-static int fs_enet_remove(struct device *dev)
-{
-	return fs_cleanup_instance(dev_get_drvdata(dev));
-}
-
-static struct device_driver fs_enet_fec_driver = {
-	.name	  	= "fsl-cpm-fec",
-	.bus		= &platform_bus_type,
-	.probe		= fs_enet_probe,
-	.remove		= fs_enet_remove,
-#ifdef CONFIG_PM
-/*	.suspend	= fs_enet_suspend,	TODO */
-/*	.resume		= fs_enet_resume,	TODO */
-#endif
-};
-
-static struct device_driver fs_enet_scc_driver = {
-	.name	  	= "fsl-cpm-scc",
-	.bus		= &platform_bus_type,
-	.probe		= fs_enet_probe,
-	.remove		= fs_enet_remove,
-#ifdef CONFIG_PM
-/*	.suspend	= fs_enet_suspend,	TODO */
-/*	.resume		= fs_enet_resume,	TODO */
-#endif
-};
-
-static struct device_driver fs_enet_fcc_driver = {
-	.name	  	= "fsl-cpm-fcc",
-	.bus		= &platform_bus_type,
-	.probe		= fs_enet_probe,
-	.remove		= fs_enet_remove,
-#ifdef CONFIG_PM
-/*	.suspend	= fs_enet_suspend,	TODO */
-/*	.resume		= fs_enet_resume,	TODO */
-#endif
-};
-
-static int __init fs_init(void)
-{
-	int r;
-
-	printk(KERN_INFO
-			"%s", version);
-
-	r = setup_immap();
-	if (r != 0)
-		return r;
-
-#ifdef CONFIG_FS_ENET_HAS_FCC
-	/* let's insert mii stuff */
-	r = fs_enet_mdio_bb_init();
-
-	if (r != 0) {
-		printk(KERN_ERR DRV_MODULE_NAME
-			"BB PHY init failed.\n");
-		return r;
-	}
-	r = driver_register(&fs_enet_fcc_driver);
-	if (r != 0)
-		goto err;
-#endif
-
-#ifdef CONFIG_FS_ENET_HAS_FEC
-	r =  fs_enet_mdio_fec_init();
-	if (r != 0) {
-		printk(KERN_ERR DRV_MODULE_NAME
-			"FEC PHY init failed.\n");
-		return r;
-	}
-
-	r = driver_register(&fs_enet_fec_driver);
-	if (r != 0)
-		goto err;
-#endif
-
-#ifdef CONFIG_FS_ENET_HAS_SCC
-	r = driver_register(&fs_enet_scc_driver);
-	if (r != 0)
-		goto err;
-#endif
-
-	return 0;
-err:
-	cleanup_immap();
-	return r;
-}
-
-static void __exit fs_cleanup(void)
-{
-	driver_unregister(&fs_enet_fec_driver);
-	driver_unregister(&fs_enet_fcc_driver);
-	driver_unregister(&fs_enet_scc_driver);
-	cleanup_immap();
-}
-#endif
 
 #ifdef CONFIG_NET_POLL_CONTROLLER
 static void fs_enet_netpoll(struct net_device *dev)
diff --git a/drivers/net/fs_enet/fs_enet.h b/drivers/net/fs_enet/fs_enet.h
index e05389c..db46d2e 100644
--- a/drivers/net/fs_enet/fs_enet.h
+++ b/drivers/net/fs_enet/fs_enet.h
@@ -138,10 +138,6 @@ struct fs_enet_private {
 };
 
 /***************************************************************************/
-#ifndef CONFIG_PPC_CPM_NEW_BINDING
-int fs_enet_mdio_bb_init(void);
-int fs_enet_mdio_fec_init(void);
-#endif
 
 void fs_init_bds(struct net_device *dev);
 void fs_cleanup_bds(struct net_device *dev);
diff --git a/drivers/net/fs_enet/mac-fcc.c b/drivers/net/fs_enet/mac-fcc.c
index e363211..133125f 100644
--- a/drivers/net/fs_enet/mac-fcc.c
+++ b/drivers/net/fs_enet/mac-fcc.c
@@ -33,6 +33,7 @@
 #include <linux/fs.h>
 #include <linux/platform_device.h>
 #include <linux/phy.h>
+#include <linux/of_device.h>
 
 #include <asm/immap_cpm2.h>
 #include <asm/mpc8260.h>
@@ -42,10 +43,6 @@
 #include <asm/irq.h>
 #include <asm/uaccess.h>
 
-#ifdef CONFIG_PPC_CPM_NEW_BINDING
-#include <asm/of_device.h>
-#endif
-
 #include "fs_enet.h"
 
 /*************************************************/
@@ -87,7 +84,6 @@ static inline int fcc_cr_cmd(struct fs_enet_private *fep, u32 op)
 
 static int do_pd_setup(struct fs_enet_private *fep)
 {
-#ifdef CONFIG_PPC_CPM_NEW_BINDING
 	struct of_device *ofdev = to_of_device(fep->dev);
 	struct fs_platform_info *fpi = fep->fpi;
 	int ret = -EINVAL;
@@ -125,44 +121,6 @@ out_fccp:
 	iounmap(fep->fcc.fccp);
 out:
 	return ret;
-#else
-	struct platform_device *pdev = to_platform_device(fep->dev);
-	struct resource *r;
-
-	/* Fill out IRQ field */
-	fep->interrupt = platform_get_irq(pdev, 0);
-	if (fep->interrupt < 0)
-		return -EINVAL;
-
-	/* Attach the memory for the FCC Parameter RAM */
-	r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "fcc_pram");
-	fep->fcc.ep = ioremap(r->start, r->end - r->start + 1);
-	if (fep->fcc.ep == NULL)
-		return -EINVAL;
-
-	r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "fcc_regs");
-	fep->fcc.fccp = ioremap(r->start, r->end - r->start + 1);
-	if (fep->fcc.fccp == NULL)
-		return -EINVAL;
-
-	if (fep->fpi->fcc_regs_c) {
-		fep->fcc.fcccp = (void __iomem *)fep->fpi->fcc_regs_c;
-	} else {
-		r = platform_get_resource_byname(pdev, IORESOURCE_MEM,
-				"fcc_regs_c");
-		fep->fcc.fcccp = ioremap(r->start,
-				r->end - r->start + 1);
-	}
-
-	if (fep->fcc.fcccp == NULL)
-		return -EINVAL;
-
-	fep->fcc.mem = (void __iomem *)fep->fpi->mem_offset;
-	if (fep->fcc.mem == NULL)
-		return -EINVAL;
-
-	return 0;
-#endif
 }
 
 #define FCC_NAPI_RX_EVENT_MSK	(FCC_ENET_RXF | FCC_ENET_RXB)
@@ -173,17 +131,6 @@ out:
 static int setup_data(struct net_device *dev)
 {
 	struct fs_enet_private *fep = netdev_priv(dev);
-#ifndef CONFIG_PPC_CPM_NEW_BINDING
-	struct fs_platform_info *fpi = fep->fpi;
-
-	fpi->cp_command = (fpi->cp_page << 26) |
-	                  (fpi->cp_block << 21) |
-	                  (12 << 6);
-
-	fep->fcc.idx = fs_get_fcc_index(fpi->fs_no);
-	if ((unsigned int)fep->fcc.idx >= 3)	/* max 3 FCCs */
-		return -EINVAL;
-#endif
 
 	if (do_pd_setup(fep) != 0)
 		return -EINVAL;
@@ -304,9 +251,6 @@ static void restart(struct net_device *dev)
 	fcc_enet_t __iomem *ep = fep->fcc.ep;
 	dma_addr_t rx_bd_base_phys, tx_bd_base_phys;
 	u16 paddrh, paddrm, paddrl;
-#ifndef CONFIG_PPC_CPM_NEW_BINDING
-	u16 mem_addr;
-#endif
 	const unsigned char *mac;
 	int i;
 
@@ -338,19 +282,10 @@ static void restart(struct net_device *dev)
 	 * this area.
 	 */
 
-#ifdef CONFIG_PPC_CPM_NEW_BINDING
 	W16(ep, fen_genfcc.fcc_riptr, fpi->dpram_offset);
 	W16(ep, fen_genfcc.fcc_tiptr, fpi->dpram_offset + 32);
 
 	W16(ep, fen_padptr, fpi->dpram_offset + 64);
-#else
-	mem_addr = (u32) fep->fcc.mem;	/* de-fixup dpram offset */
-
-	W16(ep, fen_genfcc.fcc_riptr, (mem_addr & 0xffff));
-	W16(ep, fen_genfcc.fcc_tiptr, ((mem_addr + 32) & 0xffff));
-
-	W16(ep, fen_padptr, mem_addr + 64);
-#endif
 
 	/* fill with special symbol...  */
 	memset_io(fep->fcc.mem + fpi->dpram_offset + 64, 0x88, 32);
diff --git a/drivers/net/fs_enet/mac-fec.c b/drivers/net/fs_enet/mac-fec.c
index 8a311d1..0a7d1c5 100644
--- a/drivers/net/fs_enet/mac-fec.c
+++ b/drivers/net/fs_enet/mac-fec.c
@@ -32,6 +32,7 @@
 #include <linux/bitops.h>
 #include <linux/fs.h>
 #include <linux/platform_device.h>
+#include <linux/of_device.h>
 
 #include <asm/irq.h>
 #include <asm/uaccess.h>
@@ -43,10 +44,6 @@
 #include <asm/cpm1.h>
 #endif
 
-#ifdef CONFIG_PPC_CPM_NEW_BINDING
-#include <asm/of_device.h>
-#endif
-
 #include "fs_enet.h"
 #include "fec.h"
 
@@ -99,7 +96,6 @@ static int whack_reset(fec_t __iomem *fecp)
 
 static int do_pd_setup(struct fs_enet_private *fep)
 {
-#ifdef CONFIG_PPC_CPM_NEW_BINDING
 	struct of_device *ofdev = to_of_device(fep->dev);
 
 	fep->interrupt = of_irq_to_resource(ofdev->node, 0, NULL);
@@ -111,23 +107,6 @@ static int do_pd_setup(struct fs_enet_private *fep)
 		return -EINVAL;
 
 	return 0;
-#else
-	struct platform_device *pdev = to_platform_device(fep->dev);
-	struct resource	*r;
-
-	/* Fill out IRQ field */
-	fep->interrupt = platform_get_irq_byname(pdev,"interrupt");
-	if (fep->interrupt < 0)
-		return -EINVAL;
-
-	r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "regs");
-	fep->fec.fecp = ioremap(r->start, r->end - r->start + 1);
-
-	if(fep->fec.fecp == NULL)
-		return -EINVAL;
-
-	return 0;
-#endif
 }
 
 #define FEC_NAPI_RX_EVENT_MSK	(FEC_ENET_RXF | FEC_ENET_RXB)
diff --git a/drivers/net/fs_enet/mac-scc.c b/drivers/net/fs_enet/mac-scc.c
index d7ca319..029b3c7 100644
--- a/drivers/net/fs_enet/mac-scc.c
+++ b/drivers/net/fs_enet/mac-scc.c
@@ -32,6 +32,7 @@
 #include <linux/bitops.h>
 #include <linux/fs.h>
 #include <linux/platform_device.h>
+#include <linux/of_platform.h>
 
 #include <asm/irq.h>
 #include <asm/uaccess.h>
@@ -43,10 +44,6 @@
 #include <asm/cpm1.h>
 #endif
 
-#ifdef CONFIG_PPC_CPM_NEW_BINDING
-#include <asm/of_platform.h>
-#endif
-
 #include "fs_enet.h"
 
 /*************************************************/
@@ -99,7 +96,6 @@ static inline int scc_cr_cmd(struct fs_enet_private *fep, u32 op)
 
 static int do_pd_setup(struct fs_enet_private *fep)
 {
-#ifdef CONFIG_PPC_CPM_NEW_BINDING
 	struct of_device *ofdev = to_of_device(fep->dev);
 
 	fep->interrupt = of_irq_to_resource(ofdev->node, 0, NULL);
@@ -115,27 +111,6 @@ static int do_pd_setup(struct fs_enet_private *fep)
 		iounmap(fep->scc.sccp);
 		return -EINVAL;
 	}
-#else
-	struct platform_device *pdev = to_platform_device(fep->dev);
-	struct resource *r;
-
-	/* Fill out IRQ field */
-	fep->interrupt = platform_get_irq_byname(pdev, "interrupt");
-	if (fep->interrupt < 0)
-		return -EINVAL;
-
-	r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "regs");
-	fep->scc.sccp = ioremap(r->start, r->end - r->start + 1);
-
-	if (fep->scc.sccp == NULL)
-		return -EINVAL;
-
-	r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "pram");
-	fep->scc.ep = ioremap(r->start, r->end - r->start + 1);
-
-	if (fep->scc.ep == NULL)
-		return -EINVAL;
-#endif
 
 	return 0;
 }
@@ -149,16 +124,6 @@ static int setup_data(struct net_device *dev)
 {
 	struct fs_enet_private *fep = netdev_priv(dev);
 
-#ifndef CONFIG_PPC_CPM_NEW_BINDING
-	struct fs_platform_info *fpi = fep->fpi;
-
-	fep->scc.idx = fs_get_scc_index(fpi->fs_no);
-	if ((unsigned int)fep->fcc.idx >= 4) /* max 4 SCCs */
-		return -EINVAL;
-
-	fpi->cp_command = fep->fcc.idx << 6;
-#endif
-
 	do_pd_setup(fep);
 
 	fep->scc.hthi = 0;
diff --git a/drivers/net/fs_enet/mii-bitbang.c b/drivers/net/fs_enet/mii-bitbang.c
index 1620030..be4b72f 100644
--- a/drivers/net/fs_enet/mii-bitbang.c
+++ b/drivers/net/fs_enet/mii-bitbang.c
@@ -22,10 +22,7 @@
 #include <linux/mii.h>
 #include <linux/platform_device.h>
 #include <linux/mdio-bitbang.h>
-
-#ifdef CONFIG_PPC_CPM_NEW_BINDING
 #include <linux/of_platform.h>
-#endif
 
 #include "fs_enet.h"
 
@@ -110,7 +107,6 @@ static struct mdiobb_ops bb_ops = {
 	.get_mdio_data = mdio_read,
 };
 
-#ifdef CONFIG_PPC_CPM_NEW_BINDING
 static int __devinit fs_mii_bitbang_init(struct mii_bus *bus,
                                          struct device_node *np)
 {
@@ -271,106 +267,3 @@ static void fs_enet_mdio_bb_exit(void)
 
 module_init(fs_enet_mdio_bb_init);
 module_exit(fs_enet_mdio_bb_exit);
-#else
-static int __devinit fs_mii_bitbang_init(struct bb_info *bitbang,
-                                         struct fs_mii_bb_platform_info *fmpi)
-{
-	bitbang->dir = (u32 __iomem *)fmpi->mdio_dir.offset;
-	bitbang->dat = (u32 __iomem *)fmpi->mdio_dat.offset;
-	bitbang->mdio_msk = 1U << (31 - fmpi->mdio_dat.bit);
-	bitbang->mdc_msk = 1U << (31 - fmpi->mdc_dat.bit);
-
-	return 0;
-}
-
-static int __devinit fs_enet_mdio_probe(struct device *dev)
-{
-	struct platform_device *pdev = to_platform_device(dev);
-	struct fs_mii_bb_platform_info *pdata;
-	struct mii_bus *new_bus;
-	struct bb_info *bitbang;
-	int err = 0;
-
-	if (NULL == dev)
-		return -EINVAL;
-
-	bitbang = kzalloc(sizeof(struct bb_info), GFP_KERNEL);
-
-	if (NULL == bitbang)
-		return -ENOMEM;
-
-	bitbang->ctrl.ops = &bb_ops;
-
-	new_bus = alloc_mdio_bitbang(&bitbang->ctrl);
-
-	if (NULL == new_bus)
-		return -ENOMEM;
-
-	new_bus->name = "BB MII Bus",
-	snprintf(new_bus->id, MII_BUS_ID_SIZE, "%x", pdev->id);
-
-	new_bus->phy_mask = ~0x9;
-	pdata = (struct fs_mii_bb_platform_info *)pdev->dev.platform_data;
-
-	if (NULL == pdata) {
-		printk(KERN_ERR "gfar mdio %d: Missing platform data!\n", pdev->id);
-		return -ENODEV;
-	}
-
-	/*set up workspace*/
-	fs_mii_bitbang_init(bitbang, pdata);
-
-	new_bus->priv = bitbang;
-
-	new_bus->irq = pdata->irq;
-
-	new_bus->dev = dev;
-	dev_set_drvdata(dev, new_bus);
-
-	err = mdiobus_register(new_bus);
-
-	if (0 != err) {
-		printk (KERN_ERR "%s: Cannot register as MDIO bus\n",
-				new_bus->name);
-		goto bus_register_fail;
-	}
-
-	return 0;
-
-bus_register_fail:
-	free_mdio_bitbang(new_bus);
-	kfree(bitbang);
-
-	return err;
-}
-
-static int fs_enet_mdio_remove(struct device *dev)
-{
-	struct mii_bus *bus = dev_get_drvdata(dev);
-
-	mdiobus_unregister(bus);
-
-	dev_set_drvdata(dev, NULL);
-
-	free_mdio_bitbang(bus);
-
-	return 0;
-}
-
-static struct device_driver fs_enet_bb_mdio_driver = {
-	.name = "fsl-bb-mdio",
-	.bus = &platform_bus_type,
-	.probe = fs_enet_mdio_probe,
-	.remove = fs_enet_mdio_remove,
-};
-
-int fs_enet_mdio_bb_init(void)
-{
-	return driver_register(&fs_enet_bb_mdio_driver);
-}
-
-void fs_enet_mdio_bb_exit(void)
-{
-	driver_unregister(&fs_enet_bb_mdio_driver);
-}
-#endif
diff --git a/drivers/net/fs_enet/mii-fec.c b/drivers/net/fs_enet/mii-fec.c
index f0014cf..695f74c 100644
--- a/drivers/net/fs_enet/mii-fec.c
+++ b/drivers/net/fs_enet/mii-fec.c
@@ -31,15 +31,12 @@
 #include <linux/ethtool.h>
 #include <linux/bitops.h>
 #include <linux/platform_device.h>
+#include <linux/of_platform.h>
 
 #include <asm/pgtable.h>
 #include <asm/irq.h>
 #include <asm/uaccess.h>
 
-#ifdef CONFIG_PPC_CPM_NEW_BINDING
-#include <asm/of_platform.h>
-#endif
-
 #include "fs_enet.h"
 #include "fec.h"
 
@@ -51,52 +48,6 @@
 
 #define FEC_MII_LOOPS	10000
 
-#ifndef CONFIG_PPC_CPM_NEW_BINDING
-static int match_has_phy (struct device *dev, void* data)
-{
-	struct platform_device* pdev = container_of(dev, struct platform_device, dev);
-	struct fs_platform_info* fpi;
-	if(strcmp(pdev->name, (char*)data))
-	{
-	    return 0;
-	}
-
-	fpi = pdev->dev.platform_data;
-	if((fpi)&&(fpi->has_phy))
-		return 1;
-	return 0;
-}
-
-static int fs_mii_fec_init(struct fec_info* fec, struct fs_mii_fec_platform_info *fmpi)
-{
-	struct resource *r;
-	fec_t __iomem *fecp;
-	char* name = "fsl-cpm-fec";
-
-	/* we need fec in order to be useful */
-	struct platform_device *fec_pdev =
-		container_of(bus_find_device(&platform_bus_type, NULL, name, match_has_phy),
-				struct platform_device, dev);
-
-	if(fec_pdev == NULL) {
-		printk(KERN_ERR"Unable to find PHY for %s", name);
-		return -ENODEV;
-	}
-
-	r = platform_get_resource_byname(fec_pdev, IORESOURCE_MEM, "regs");
-
-	fec->fecp = fecp = ioremap(r->start,sizeof(fec_t));
-	fec->mii_speed = fmpi->mii_speed;
-
-	setbits32(&fecp->fec_r_cntrl, FEC_RCNTRL_MII_MODE);	/* MII enable */
-	setbits32(&fecp->fec_ecntrl, FEC_ECNTRL_PINMUX | FEC_ECNTRL_ETHER_EN);
-	out_be32(&fecp->fec_ievent, FEC_ENET_MII);
-	out_be32(&fecp->fec_mii_speed, fec->mii_speed);
-
-	return 0;
-}
-#endif
-
 static int fs_enet_fec_mii_read(struct mii_bus *bus , int phy_id, int location)
 {
 	struct fec_info* fec = bus->priv;
@@ -151,7 +102,6 @@ static int fs_enet_fec_mii_reset(struct mii_bus *bus)
 	return 0;
 }
 
-#ifdef CONFIG_PPC_CPM_NEW_BINDING
 static void __devinit add_phy(struct mii_bus *bus, struct device_node *np)
 {
 	const u32 *data;
@@ -286,95 +236,3 @@ static void fs_enet_mdio_fec_exit(void)
 
 module_init(fs_enet_mdio_fec_init);
 module_exit(fs_enet_mdio_fec_exit);
-#else
-static int __devinit fs_enet_fec_mdio_probe(struct device *dev)
-{
-	struct platform_device *pdev = to_platform_device(dev);
-	struct fs_mii_fec_platform_info *pdata;
-	struct mii_bus *new_bus;
-	struct fec_info *fec;
-	int err = 0;
-	if (NULL == dev)
-		return -EINVAL;
-	new_bus = kzalloc(sizeof(struct mii_bus), GFP_KERNEL);
-
-	if (NULL == new_bus)
-		return -ENOMEM;
-
-	fec = kzalloc(sizeof(struct fec_info), GFP_KERNEL);
-
-	if (NULL == fec)
-		return -ENOMEM;
-
-	new_bus->name = "FEC MII Bus",
-	new_bus->read = &fs_enet_fec_mii_read,
-	new_bus->write = &fs_enet_fec_mii_write,
-	new_bus->reset = &fs_enet_fec_mii_reset,
-	snprintf(new_bus->id, MII_BUS_ID_SIZE, "%x", pdev->id);
-
-	pdata = (struct fs_mii_fec_platform_info *)pdev->dev.platform_data;
-
-	if (NULL == pdata) {
-		printk(KERN_ERR "fs_enet FEC mdio %d: Missing platform data!\n", pdev->id);
-		return -ENODEV;
-	}
-
-	/*set up workspace*/
-
-	fs_mii_fec_init(fec, pdata);
-	new_bus->priv = fec;
-
-	new_bus->irq = pdata->irq;
-
-	new_bus->dev = dev;
-	dev_set_drvdata(dev, new_bus);
-
-	err = mdiobus_register(new_bus);
-
-	if (0 != err) {
-		printk (KERN_ERR "%s: Cannot register as MDIO bus\n",
-				new_bus->name);
-		goto bus_register_fail;
-	}
-
-	return 0;
-
-bus_register_fail:
-	kfree(new_bus);
-
-	return err;
-}
-
-
-static int fs_enet_fec_mdio_remove(struct device *dev)
-{
-	struct mii_bus *bus = dev_get_drvdata(dev);
-
-	mdiobus_unregister(bus);
-
-	dev_set_drvdata(dev, NULL);
-	kfree(bus->priv);
-
-	bus->priv = NULL;
-	kfree(bus);
-
-	return 0;
-}
-
-static struct device_driver fs_enet_fec_mdio_driver = {
-	.name = "fsl-cpm-fec-mdio",
-	.bus = &platform_bus_type,
-	.probe = fs_enet_fec_mdio_probe,
-	.remove = fs_enet_fec_mdio_remove,
-};
-
-int fs_enet_mdio_fec_init(void)
-{
-	return driver_register(&fs_enet_fec_mdio_driver);
-}
-
-void fs_enet_mdio_fec_exit(void)
-{
-	driver_unregister(&fs_enet_fec_mdio_driver);
-}
-#endif
diff --git a/include/linux/fs_enet_pd.h b/include/linux/fs_enet_pd.h
index 9bc045b..0ba21ee 100644
--- a/include/linux/fs_enet_pd.h
+++ b/include/linux/fs_enet_pd.h
@@ -135,11 +135,7 @@ struct fs_platform_info {
 	u32 device_flags;
 
 	int phy_addr;		/* the phy address (-1 no phy) */
-#ifdef CONFIG_PPC_CPM_NEW_BINDING
 	char bus_id[16];
-#else
-	const char*	bus_id;
-#endif
 	int phy_irq;		/* the phy irq (if it exists)  */
 
 	const struct fs_mii_bus_info *bus_info;
-- 
1.5.5.1

[PATCH 5/5] powerpc: Remove Kconfig PPC_CPM_NEW_BINDING

[Kumar Gala]

With arch/ppc gone and all in kernel users of CONFIG_PPC_CPM_NEW_BINDING
fixed up we dont have need for the Kconfig option anymore.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
---
 arch/powerpc/platforms/85xx/Kconfig |    1 -
 arch/powerpc/platforms/Kconfig      |    5 -----
 2 files changed, 0 insertions(+), 6 deletions(-)

diff --git a/arch/powerpc/platforms/85xx/Kconfig b/arch/powerpc/platforms/85xx/Kconfig
index 91d67ee..5627a4e 100644
--- a/arch/powerpc/platforms/85xx/Kconfig
+++ b/arch/powerpc/platforms/85xx/Kconfig
@@ -79,7 +79,6 @@ config TQM8548
 	help
 	  This option enables support for the TQ Components TQM8548 board.
 	select DEFAULT_UIMAGE
-	select PPC_CPM_NEW_BINDING
 	select TQM85xx
 
 config TQM8555
diff --git a/arch/powerpc/platforms/Kconfig b/arch/powerpc/platforms/Kconfig
index 87454c5..10efaf8 100644
--- a/arch/powerpc/platforms/Kconfig
+++ b/arch/powerpc/platforms/Kconfig
@@ -286,11 +286,6 @@ config CPM2
 	  you wish to build a kernel for a machine with a CPM2 coprocessor
 	  on it (826x, 827x, 8560).
 
-config PPC_CPM_NEW_BINDING
-	bool
-	depends on CPM1 || CPM2
-	default y
-
 config AXON_RAM
 	tristate "Axon DDR2 memory device driver"
 	depends on PPC_IBM_CELL_BLADE
-- 
1.5.5.1