[PATCH 0/6] MPC5121 Updates

[PATCH 0/6] MPC5121 Updates

[John Rigby]

The following patches contain updates for MPC5121

1/6
    Updates the device tree.
2/6
    Adds a clock driver.
3/6
    Adds support for generic boards.  This is nearly identical to
    David Jander's patch but does not delete the ADS board option.
    ADS is not a candidate for generic since it has an on board
    cpld that does pci interrupt routing.
4/6 
    Adds support for the CPLD on the MPC5121ADS board.
5/6 
    Adds pci
6/6 
    Hides the pci bridge

[PATCH 2/6] MPC5121 clock driver

[John Rigby]

Implements the api defined in include/clk.h

Current only getting frequencies is supported
not setting.

Signed-off-by: John Rigby <jrigby@freescale.com>
---
 arch/powerpc/platforms/512x/Makefile |    1 +
 arch/powerpc/platforms/512x/clock.c  |  729 ++++++++++++++++++++++++++++++++++
 2 files changed, 730 insertions(+), 0 deletions(-)
 create mode 100644 arch/powerpc/platforms/512x/clock.c

diff --git a/arch/powerpc/platforms/512x/Makefile b/arch/powerpc/platforms/512x/Makefile
index 232c89f..ef6c925 100644
--- a/arch/powerpc/platforms/512x/Makefile
+++ b/arch/powerpc/platforms/512x/Makefile
@@ -1,4 +1,5 @@
 #
 # Makefile for the Freescale PowerPC 512x linux kernel.
 #
+obj-y				:= clock.o
 obj-$(CONFIG_MPC5121_ADS)	+= mpc5121_ads.o
diff --git a/arch/powerpc/platforms/512x/clock.c b/arch/powerpc/platforms/512x/clock.c
new file mode 100644
index 0000000..39db722
--- /dev/null
+++ b/arch/powerpc/platforms/512x/clock.c
@@ -0,0 +1,729 @@
+/*
+ * Copyright (C) 2007,2008 Freescale Semiconductor, Inc. All rights reserved.
+ *
+ * Author: John Rigby <jrigby@freescale.com>
+ *
+ * Implements the clk api defined in include/linux/clk.h
+ *
+ *    Original based on linux/arch/arm/mach-integrator/clock.c
+ *
+ *    Copyright (C) 2004 ARM Limited.
+ *    Written by Deep Blue Solutions Limited.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/string.h>
+#include <linux/clk.h>
+#include <linux/mutex.h>
+#include <linux/io.h>
+
+#include <linux/of_platform.h>
+#include <asm/mpc512x.h>
+
+static int clocks_initialized;
+
+struct module;
+
+#define CLK_HAS_RATE	0x1	/* has rate in MHz */
+#define CLK_HAS_CTRL	0x2	/* has control reg and bit */
+
+struct clk {
+	struct list_head node;
+	char name[32];
+	int flags;
+	struct device *dev;
+	unsigned long rate;
+	struct module *owner;
+	void (*calc) (struct clk *);
+	struct clk *parent;
+	int reg, bit;		/* CLK_HAS_CTRL */
+	int div_shift;		/* only used by generic_div_clk_calc */
+};
+
+static LIST_HEAD(clocks);
+static DEFINE_MUTEX(clocks_mutex);
+
+struct clk *clk_get(struct device *dev, const char *id)
+{
+	struct clk *p, *clk = ERR_PTR(-ENOENT);
+	int dev_match = 0;
+	int id_match = 0;
+
+	if (dev == NULL && id == NULL)
+		return NULL;
+
+	mutex_lock(&clocks_mutex);
+	list_for_each_entry(p, &clocks, node) {
+		if (dev && dev == p->dev)
+			dev_match++;
+		if (strcmp(id, p->name) == 0)
+			id_match++;
+		if ((dev_match || id_match) && try_module_get(p->owner)) {
+			clk = p;
+			break;
+		}
+	}
+	mutex_unlock(&clocks_mutex);
+
+	return clk;
+}
+EXPORT_SYMBOL(clk_get);
+
+#undef CLK_DEBUG
+#ifdef CLK_DEBUG
+void dump_clocks(void)
+{
+	struct clk *p;
+
+	mutex_lock(&clocks_mutex);
+	printk(KERN_INFO "CLOCKS:\n");
+	list_for_each_entry(p, &clocks, node) {
+		printk(KERN_INFO "  %s %ld", p->name, p->rate);
+		if (p->parent)
+			printk(KERN_INFO " %s %ld", p->parent->name,
+			       p->parent->rate);
+		if (p->flags & CLK_HAS_CTRL)
+			printk(KERN_INFO " reg/bit %d/%d", p->reg, p->bit);
+		printk("\n");
+	}
+	mutex_unlock(&clocks_mutex);
+}
+#define	DEBUG_CLK_DUMP() dump_clocks()
+#else
+#define	DEBUG_CLK_DUMP()
+#endif
+
+
+void clk_put(struct clk *clk)
+{
+	module_put(clk->owner);
+}
+EXPORT_SYMBOL(clk_put);
+
+#define NRPSC 12
+
+struct mpc512x_clockctl {
+	u32 spmr;		/* System PLL Mode Reg */
+	u32 sccr[2];		/* System Clk Ctrl Reg 1 & 2 */
+	u32 scfr1;		/* System Clk Freq Reg 1 */
+	u32 scfr2;		/* System Clk Freq Reg 2 */
+	u32 reserved;
+	u32 bcr;		/* Bread Crumb Reg */
+	u32 pccr[NRPSC];	/* PSC Clk Ctrl Reg 0-11 */
+	u32 spccr;		/* SPDIF Clk Ctrl Reg */
+	u32 cccr;		/* CFM Clk Ctrl Reg */
+	u32 dccr;		/* DIU Clk Cnfg Reg */
+};
+
+struct mpc512x_clockctl __iomem *clockctl;
+
+int clk_enable(struct clk *clk)
+{
+	unsigned int mask;
+
+	if (clk->flags & CLK_HAS_CTRL) {
+		mask = in_be32(&clockctl->sccr[clk->reg]);
+		mask |= 1 << clk->bit;
+		out_be32(&clockctl->sccr[clk->reg], mask);
+	}
+	return 0;
+}
+EXPORT_SYMBOL(clk_enable);
+
+void clk_disable(struct clk *clk)
+{
+	unsigned int mask;
+
+	if (clk->flags & CLK_HAS_CTRL) {
+		mask = in_be32(&clockctl->sccr[clk->reg]);
+		mask &= ~(1 << clk->bit);
+		out_be32(&clockctl->sccr[clk->reg], mask);
+	}
+}
+EXPORT_SYMBOL(clk_disable);
+
+unsigned long clk_get_rate(struct clk *clk)
+{
+	if (clk->flags & CLK_HAS_RATE)
+		return clk->rate;
+	else
+		return 0;
+}
+EXPORT_SYMBOL(clk_get_rate);
+
+long clk_round_rate(struct clk *clk, unsigned long rate)
+{
+	return rate;
+}
+EXPORT_SYMBOL(clk_round_rate);
+
+int clk_set_rate(struct clk *clk, unsigned long rate)
+{
+	return 0;
+}
+EXPORT_SYMBOL(clk_set_rate);
+
+static int clk_register(struct clk *clk)
+{
+	mutex_lock(&clocks_mutex);
+	list_add(&clk->node, &clocks);
+	mutex_unlock(&clocks_mutex);
+	return 0;
+}
+
+static unsigned long spmf_mult(void)
+{
+	/*
+	 * Convert spmf to multiplier
+	 */
+	static int spmf_to_mult[] = {
+		68, 1, 12, 16,
+		20, 24, 28, 32,
+		36, 40, 44, 48,
+		52, 56, 60, 64
+	};
+	int spmf = (clockctl->spmr >> 24) & 0xf;
+	return spmf_to_mult[spmf];
+}
+
+static unsigned long sysdiv_div_x_2(void)
+{
+	/*
+	 * Convert sysdiv to divisor x 2
+	 * Some divisors have fractional parts so
+	 * multiply by 2 then divide by this value
+	 */
+	static int sysdiv_to_div_x_2[] = {
+		4, 5, 6, 7,
+		8, 9, 10, 14,
+		12, 16, 18, 22,
+		20, 24, 26, 30,
+		28, 32, 34, 38,
+		36, 40, 42, 46,
+		44, 48, 50, 54,
+		52, 56, 58, 62,
+		60, 64, 66,
+	};
+	int sysdiv = (clockctl->scfr2 >> 26) & 0x3f;
+	return sysdiv_to_div_x_2[sysdiv];
+}
+
+static unsigned long ref_to_sys(unsigned long rate)
+{
+	rate *= spmf_mult();
+	rate *= 2;
+	rate /= sysdiv_div_x_2();
+
+	return rate;
+}
+
+static unsigned long sys_to_ref(unsigned long rate)
+{
+	rate *= sysdiv_div_x_2();
+	rate /= 2;
+	rate /= spmf_mult();
+
+	return rate;
+}
+
+static long ips_to_ref(unsigned long rate)
+{
+	int ips_div = (clockctl->scfr1 >> 23) & 0x7;
+
+	rate *= ips_div;	/* csb_clk = ips_clk * ips_div */
+	rate *= 2;		/* sys_clk = csb_clk * 2 */
+	return sys_to_ref(rate);
+}
+
+static unsigned long devtree_getfreq(char *nodetype, char *clockname)
+{
+	struct device_node *node;
+	const unsigned int *fp;
+	unsigned int val = 0;
+
+	node = of_find_node_by_type(NULL, "soc");
+	if (node) {
+		fp = of_get_property(node, clockname, NULL);
+		if (fp)
+			val = of_read_ulong(fp, 1);
+	}
+	return val;
+}
+
+static void ref_clk_calc(struct clk *clk)
+{
+	unsigned long rate;
+
+	rate = devtree_getfreq("soc", "ref-frequency");
+	if (rate == 0) {
+		/*
+		 * no reference clock in device tree
+		 * get ips clock freq and go backwards from there
+		 */
+		rate = devtree_getfreq("soc", "bus-frequency");
+		if (rate == 0) {
+			printk(KERN_WARNING
+				"No bus-frequency in dev tree using 66MHz\n");
+			clk->rate = 66000000;
+			return;
+		}
+		clk->rate = ips_to_ref(rate);
+	}
+}
+
+static struct clk ref_clk = {
+	.name = "ref_clk",
+	.calc = ref_clk_calc,
+};
+
+
+static void sys_clk_calc(struct clk *clk)
+{
+	clk->rate = ref_to_sys(ref_clk.rate);
+}
+
+static struct clk sys_clk = {
+	.name = "sys_clk",
+	.calc = sys_clk_calc,
+};
+
+static void diu_clk_calc(struct clk *clk)
+{
+	int diudiv_x_2 = clockctl->scfr1 & 0xff;
+	unsigned long rate;
+
+	rate = sys_clk.rate;
+
+	rate *= 2;
+	rate /= diudiv_x_2;
+
+	clk->rate = rate;
+}
+
+static void half_clk_calc(struct clk *clk)
+{
+	clk->rate = clk->parent->rate / 2;
+}
+
+static void generic_div_clk_calc(struct clk *clk)
+{
+	int div = (clockctl->scfr1 >> clk->div_shift) & 0x7;
+
+	clk->rate = clk->parent->rate / div;
+}
+
+static void unity_clk_calc(struct clk *clk)
+{
+	clk->rate = clk->parent->rate;
+}
+
+static struct clk csb_clk = {
+	.name = "csb_clk",
+	.calc = half_clk_calc,
+	.parent = &sys_clk,
+};
+
+static void e300_clk_calc(struct clk *clk)
+{
+	int spmf = (clockctl->spmr >> 16) & 0xf;
+	int ratex2 = clk->parent->rate * spmf;
+
+	clk->rate = ratex2 / 2;
+}
+
+static struct clk e300_clk = {
+	.name = "e300_clk",
+	.calc = e300_clk_calc,
+	.parent = &csb_clk,
+};
+
+static struct clk ips_clk = {
+	.name = "ips_clk",
+	.calc = generic_div_clk_calc,
+	.parent = &csb_clk,
+	.div_shift = 23,
+};
+
+/*
+ * Clocks controlled by SCCR1 (.reg = 0)
+ */
+static struct clk lpc_clk = {
+	.name = "lpc_clk",
+	.flags = CLK_HAS_CTRL,
+	.reg = 0,
+	.bit = 30,
+	.calc = generic_div_clk_calc,
+	.parent = &ips_clk,
+	.div_shift = 11,
+};
+
+static struct clk nfc_clk = {
+	.name = "nfc_clk",
+	.flags = CLK_HAS_CTRL,
+	.reg = 0,
+	.bit = 29,
+	.calc = generic_div_clk_calc,
+	.parent = &ips_clk,
+	.div_shift = 8,
+};
+
+static struct clk pata_clk = {
+	.name = "pata_clk",
+	.flags = CLK_HAS_CTRL,
+	.reg = 0,
+	.bit = 28,
+	.calc = unity_clk_calc,
+	.parent = &ips_clk,
+};
+
+/*
+ * PSC clocks (bits 27 - 16)
+ * are setup elsewhere
+ */
+
+static struct clk sata_clk = {
+	.name = "sata_clk",
+	.flags = CLK_HAS_CTRL,
+	.reg = 0,
+	.bit = 14,
+	.calc = unity_clk_calc,
+	.parent = &ips_clk,
+};
+
+static struct clk fec_clk = {
+	.name = "fec_clk",
+	.flags = CLK_HAS_CTRL,
+	.reg = 0,
+	.bit = 13,
+	.calc = unity_clk_calc,
+	.parent = &ips_clk,
+};
+
+static struct clk pci_clk = {
+	.name = "pci_clk",
+	.flags = CLK_HAS_CTRL,
+	.reg = 0,
+	.bit = 11,
+	.calc = generic_div_clk_calc,
+	.parent = &csb_clk,
+	.div_shift = 20,
+};
+
+/*
+ * Clocks controlled by SCCR2 (.reg = 1)
+ */
+static struct clk diu_clk = {
+	.name = "diu_clk",
+	.flags = CLK_HAS_CTRL,
+	.reg = 1,
+	.bit = 31,
+	.calc = diu_clk_calc,
+};
+
+static struct clk axe_clk = {
+	.name = "axe_clk",
+	.flags = CLK_HAS_CTRL,
+	.reg = 1,
+	.bit = 30,
+	.calc = unity_clk_calc,
+	.parent = &csb_clk,
+};
+
+static struct clk usb1_clk = {
+	.name = "usb1_clk",
+	.flags = CLK_HAS_CTRL,
+	.reg = 1,
+	.bit = 28,
+	.calc = unity_clk_calc,
+	.parent = &csb_clk,
+};
+
+static struct clk usb2_clk = {
+	.name = "usb2_clk",
+	.flags = CLK_HAS_CTRL,
+	.reg = 1,
+	.bit = 27,
+	.calc = unity_clk_calc,
+	.parent = &csb_clk,
+};
+
+static struct clk i2c_clk = {
+	.name = "i2c_clk",
+	.flags = CLK_HAS_CTRL,
+	.reg = 1,
+	.bit = 26,
+	.calc = unity_clk_calc,
+	.parent = &ips_clk,
+};
+
+static struct clk mscan_clk = {
+	.name = "mscan_clk",
+	.flags = CLK_HAS_CTRL,
+	.reg = 1,
+	.bit = 25,
+	.calc = unity_clk_calc,
+	.parent = &ips_clk,
+};
+
+static struct clk sdhc_clk = {
+	.name = "sdhc_clk",
+	.flags = CLK_HAS_CTRL,
+	.reg = 1,
+	.bit = 24,
+	.calc = unity_clk_calc,
+	.parent = &ips_clk,
+};
+
+static struct clk mbx_bus_clk = {
+	.name = "mbx_bus_clk",
+	.flags = CLK_HAS_CTRL,
+	.reg = 1,
+	.bit = 22,
+	.calc = half_clk_calc,
+	.parent = &csb_clk,
+};
+
+static struct clk mbx_clk = {
+	.name = "mbx_clk",
+	.flags = CLK_HAS_CTRL,
+	.reg = 1,
+	.bit = 21,
+	.calc = unity_clk_calc,
+	.parent = &csb_clk,
+};
+
+static struct clk mbx_3d_clk = {
+	.name = "mbx_3d_clk",
+	.flags = CLK_HAS_CTRL,
+	.reg = 1,
+	.bit = 20,
+	.calc = generic_div_clk_calc,
+	.parent = &mbx_bus_clk,
+	.div_shift = 14,
+};
+
+static void psc_mclk_in_calc(struct clk *clk)
+{
+	clk->rate = devtree_getfreq("soc", "psc_mclk_in");
+	if (!clk->rate)
+		clk->rate = 25000000;
+}
+
+static struct clk psc_mclk_in = {
+	.name = "psc_mclk_in",
+	.calc = psc_mclk_in_calc,
+};
+
+static struct clk spdif_txclk = {
+	.name = "spdif_txclk",
+	.flags = CLK_HAS_CTRL,
+	.reg = 1,
+	.bit = 23,
+};
+
+static struct clk spdif_rxclk = {
+	.name = "spdif_rxclk",
+	.flags = CLK_HAS_CTRL,
+	.reg = 1,
+	.bit = 23,
+};
+
+static void ac97_clk_calc(struct clk *clk)
+{
+	/* ac97 bit clock is always 24.567 MHz */
+	clk->rate = 24567000;
+}
+
+static struct clk ac97_clk = {
+	.name = "ac97_clk_in",
+	.calc = ac97_clk_calc,
+};
+
+struct clk *rate_clks[] = {
+	&ref_clk,
+	&sys_clk,
+	&diu_clk,
+	&csb_clk,
+	&e300_clk,
+	&ips_clk,
+	&fec_clk,
+	&sata_clk,
+	&pata_clk,
+	&nfc_clk,
+	&lpc_clk,
+	&mbx_bus_clk,
+	&mbx_clk,
+	&mbx_3d_clk,
+	&axe_clk,
+	&usb1_clk,
+	&usb2_clk,
+	&i2c_clk,
+	&mscan_clk,
+	&sdhc_clk,
+	&pci_clk,
+	&psc_mclk_in,
+	&spdif_txclk,
+	&spdif_rxclk,
+	&ac97_clk,
+	NULL
+};
+
+static void rate_clk_init(struct clk *clk)
+{
+	if (clk->calc) {
+		clk->calc(clk);
+		clk->flags |= CLK_HAS_RATE;
+		clk_register(clk);
+	} else {
+		printk(KERN_WARNING
+		       "Could not initialize clk %s without a calc routine\n",
+		       clk->name);
+	}
+}
+
+static void rate_clks_init(void)
+{
+	struct clk **cpp, *clk;
+
+	cpp = rate_clks;
+	while ((clk = *cpp++))
+		rate_clk_init(clk);
+}
+
+/*
+ * There are two clk enable registers with 32 enable bits each
+ * psc clocks and device clocks are all stored in dev_clks
+ */
+struct clk dev_clks[2][32];
+
+/*
+ * Given a psc number return the dev_clk
+ * associated with it
+ */
+static struct clk *psc_dev_clk(int pscnum)
+{
+	int reg, bit;
+	struct clk *clk;
+
+	reg = 0;
+	bit = 27 - pscnum;
+
+	clk = &dev_clks[reg][bit];
+	clk->reg = 0;
+	clk->bit = bit;
+	return clk;
+}
+
+/*
+ * PSC clock rate calculation
+ */
+static void psc_calc_rate(struct clk *clk, int pscnum, struct device_node *np)
+{
+	unsigned long mclk_src = sys_clk.rate;
+	unsigned long mclk_div;
+
+	/*
+	 * Can only change value of mclk divider
+	 * when the divider is disabled.
+	 *
+	 * Zero is not a valid divider so minimum
+	 * divider is 1
+	 *
+	 * disable/set divider/enable
+	 */
+	out_be32(&clockctl->pccr[pscnum], 0);
+	out_be32(&clockctl->pccr[pscnum], 0x00020000);
+	out_be32(&clockctl->pccr[pscnum], 0x00030000);
+
+	if (clockctl->pccr[pscnum] & 0x80) {
+		clk->rate = spdif_rxclk.rate;
+		return;
+	}
+
+	switch ((clockctl->pccr[pscnum] >> 14) & 0x3) {
+	case 0:
+		mclk_src = sys_clk.rate;
+		break;
+	case 1:
+		mclk_src = ref_clk.rate;
+		break;
+	case 2:
+		mclk_src = psc_mclk_in.rate;
+		break;
+	case 3:
+		mclk_src = spdif_txclk.rate;
+		break;
+	}
+
+	mclk_div = ((clockctl->pccr[pscnum] >> 17) & 0x7fff) + 1;
+	clk->rate = mclk_src / mclk_div;
+}
+
+/*
+ * Find all psc nodes in device tree and assign a clock
+ * with name "psc%d_mclk" and dev pointing at the device
+ * returned from of_find_device_by_node
+ */
+static void psc_clks_init(void)
+{
+	struct device_node *np;
+	const u32 *cell_index;
+	struct of_device *ofdev;
+
+	for_each_compatible_node(np, NULL, "fsl,mpc5121-psc") {
+		cell_index = of_get_property(np, "cell-index", NULL);
+		if (cell_index) {
+			int pscnum = *cell_index;
+			struct clk *clk = psc_dev_clk(pscnum);
+
+			clk->flags = CLK_HAS_RATE | CLK_HAS_CTRL;
+			ofdev = of_find_device_by_node(np);
+			clk->dev = &ofdev->dev;
+			/*
+			 * AC97 is special rate clock does
+			 * not go through normal path
+			 */
+			if (strcmp("ac97", np->name) == 0)
+				clk->rate = ac97_clk.rate;
+			else
+				psc_calc_rate(clk, pscnum, np);
+			sprintf(clk->name, "psc%d_mclk", pscnum);
+			clk_register(clk);
+			clk_enable(clk);
+		}
+	}
+}
+
+static int
+mpc5121_clk_init(void)
+{
+	struct device_node *np;
+
+	np = of_find_compatible_node(NULL, NULL, "fsl,mpc5121-clock");
+	clockctl = of_iomap(np, 0);
+	of_node_put(np);
+
+	if (!clockctl) {
+		printk(KERN_ERR "Could not map clock control registers\n");
+		return 0;
+	}
+
+	rate_clks_init();
+	psc_clks_init();
+
+	/* leave clockctl mapped forever */
+	/*iounmap(clockctl); */
+	DEBUG_CLK_DUMP();
+	clocks_initialized++;
+	return 0;
+}
+
+
+arch_initcall(mpc5121_clk_init);
-- 
1.5.6.rc0.46.gd2b3

[PATCH 3/6] MPC5121 Add generic board support

[John Rigby]

Move shared code from mpc5121_ads.c to mpc512x_shared.c.
Add new generic board setup mpc5121_generic.c

Signed-off-by: John Rigby <jrigby@freescale.com>
---
 arch/powerpc/platforms/512x/Kconfig           |   15 ++++-
 arch/powerpc/platforms/512x/Makefile          |    3 +-
 arch/powerpc/platforms/512x/mpc5121_ads.c     |   45 +---------------
 arch/powerpc/platforms/512x/mpc5121_generic.c |   72 +++++++++++++++++++++++++
 arch/powerpc/platforms/512x/mpc512x.h         |   14 +++++
 arch/powerpc/platforms/512x/mpc512x_shared.c  |   66 ++++++++++++++++++++++
 6 files changed, 168 insertions(+), 47 deletions(-)
 create mode 100644 arch/powerpc/platforms/512x/mpc5121_generic.c
 create mode 100644 arch/powerpc/platforms/512x/mpc512x.h
 create mode 100644 arch/powerpc/platforms/512x/mpc512x_shared.c

diff --git a/arch/powerpc/platforms/512x/Kconfig b/arch/powerpc/platforms/512x/Kconfig
index 4c0da0c..f9a04da 100644
--- a/arch/powerpc/platforms/512x/Kconfig
+++ b/arch/powerpc/platforms/512x/Kconfig
@@ -2,12 +2,10 @@ config PPC_MPC512x
 	bool
 	select FSL_SOC
 	select IPIC
-	default n
 
 config PPC_MPC5121
 	bool
 	select PPC_MPC512x
-	default n
 
 config MPC5121_ADS
 	bool "Freescale MPC5121E ADS"
@@ -16,4 +14,15 @@ config MPC5121_ADS
 	select PPC_MPC5121
 	help
 	  This option enables support for the MPC5121E ADS board.
-	default n
+
+config MPC5121_GENERIC
+	bool "Generic support for simple MPC5121 based boards"
+	depends on PPC_MULTIPLATFORM && PPC32
+	select DEFAULT_UIMAGE
+	select PPC_MPC5121
+	help
+	  This option enables support for simple MPC5121 based boards
+	  which do not need custome platform specific setup.
+
+	  Compatible boards include:  Protonic LVT base boards (ZANMCU
+	  and VICVT2).
diff --git a/arch/powerpc/platforms/512x/Makefile b/arch/powerpc/platforms/512x/Makefile
index ef6c925..e6674c8 100644
--- a/arch/powerpc/platforms/512x/Makefile
+++ b/arch/powerpc/platforms/512x/Makefile
@@ -1,5 +1,6 @@
 #
 # Makefile for the Freescale PowerPC 512x linux kernel.
 #
-obj-y				:= clock.o
+obj-y				:= clock.o mpc512x_shared.o
 obj-$(CONFIG_MPC5121_ADS)	+= mpc5121_ads.o
+obj-$(CONFIG_MPC5121_GENERIC)	+= mpc5121_generic.o
diff --git a/arch/powerpc/platforms/512x/mpc5121_ads.c b/arch/powerpc/platforms/512x/mpc5121_ads.c
index 50bd3a3..45bb2ef 100644
--- a/arch/powerpc/platforms/512x/mpc5121_ads.c
+++ b/arch/powerpc/platforms/512x/mpc5121_ads.c
@@ -15,7 +15,6 @@
 
 #include <linux/kernel.h>
 #include <linux/io.h>
-#include <linux/irq.h>
 #include <linux/of_platform.h>
 
 #include <asm/machdep.h>
@@ -23,34 +22,7 @@
 #include <asm/prom.h>
 #include <asm/time.h>
 
-/**
- * 	mpc512x_find_ips_freq - Find the IPS bus frequency for a device
- * 	@node:	device node
- *
- * 	Returns IPS bus frequency, or 0 if the bus frequency cannot be found.
- */
-unsigned long
-mpc512x_find_ips_freq(struct device_node *node)
-{
-	struct device_node *np;
-	const unsigned int *p_ips_freq = NULL;
-
-	of_node_get(node);
-	while (node) {
-		p_ips_freq = of_get_property(node, "bus-frequency", NULL);
-		if (p_ips_freq)
-			break;
-
-		np = of_get_parent(node);
-		of_node_put(node);
-		node = np;
-	}
-	if (node)
-		of_node_put(node);
-
-	return p_ips_freq ? *p_ips_freq : 0;
-}
-EXPORT_SYMBOL(mpc512x_find_ips_freq);
+#include "mpc512x.h"
 
 static struct of_device_id __initdata of_bus_ids[] = {
 	{ .name = "soc", },
@@ -68,20 +40,7 @@ static void __init mpc5121_ads_declare_of_platform_devices(void)
 
 static void __init mpc5121_ads_init_IRQ(void)
 {
-	struct device_node *np;
-
-	np = of_find_compatible_node(NULL, NULL, "fsl,ipic");
-	if (!np)
-		return;
-
-	ipic_init(np, 0);
-	of_node_put(np);
-
-	/*
-	 * Initialize the default interrupt mapping priorities,
-	 * in case the boot rom changed something on us.
-	 */
-	ipic_set_default_priority();
+	mpc512x_init_IRQ();
 }
 
 /*
diff --git a/arch/powerpc/platforms/512x/mpc5121_generic.c b/arch/powerpc/platforms/512x/mpc5121_generic.c
new file mode 100644
index 0000000..0111a98
--- /dev/null
+++ b/arch/powerpc/platforms/512x/mpc5121_generic.c
@@ -0,0 +1,72 @@
+/*
+ * Copyright (C) 2007,2008 Freescale Semiconductor, Inc. All rights reserved.
+ *
+ * Author: John Rigby, <jrigby@freescale.com>
+ *
+ * Description:
+ * MPC5121 SoC setup
+ *
+ * This is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/of_platform.h>
+
+#include <asm/machdep.h>
+#include <asm/ipic.h>
+#include <asm/prom.h>
+#include <asm/time.h>
+
+#include "mpc512x.h"
+
+static struct of_device_id __initdata of_bus_ids[] = {
+	{ .name = "soc", },
+	{ .name = "localbus", },
+	{},
+};
+
+static void __init mpc5121_generic_declare_of_platform_devices(void)
+{
+	/* Find every child of the SOC node and add it to of_platform */
+	if (of_platform_bus_probe(NULL, of_bus_ids, NULL))
+		printk(KERN_ERR __FILE__ ": "
+			"Error while probing of_platform bus\n");
+}
+
+/*
+ * list of supported boards
+ */
+static char *board[] __initdata = {
+	"prt,prtlvt",
+	NULL
+};
+
+/*
+ * Called very early, MMU is off, device-tree isn't unflattened
+ */
+static int __init mpc5121_generic_probe(void)
+{
+	unsigned long node = of_get_flat_dt_root();
+	int i = 0;
+
+	while (board[i]) {
+		if (of_flat_dt_is_compatible(node, board[i]))
+			break;
+		i++;
+	}
+
+	return board[i] != NULL;
+}
+
+define_machine(mpc5121_generic) {
+	.name			= "MPC5121 generic",
+	.probe			= mpc5121_generic_probe,
+	.init			= mpc5121_generic_declare_of_platform_devices,
+	.init_IRQ		= mpc512x_init_IRQ,
+	.get_irq		= ipic_get_irq,
+	.calibrate_decr		= generic_calibrate_decr,
+};
diff --git a/arch/powerpc/platforms/512x/mpc512x.h b/arch/powerpc/platforms/512x/mpc512x.h
new file mode 100644
index 0000000..789b817
--- /dev/null
+++ b/arch/powerpc/platforms/512x/mpc512x.h
@@ -0,0 +1,14 @@
+/*
+ * Copyright (C) 2007 Freescale Semiconductor, Inc. All rights reserved.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#ifndef __MPC512X_H__
+#define __MPC512X_H__
+extern unsigned long mpc512x_find_ips_freq(struct device_node *node);
+extern void __init mpc512x_init_IRQ(void);
+#endif				/* __MPC512X_H__ */
diff --git a/arch/powerpc/platforms/512x/mpc512x_shared.c b/arch/powerpc/platforms/512x/mpc512x_shared.c
new file mode 100644
index 0000000..4b8fe6a
--- /dev/null
+++ b/arch/powerpc/platforms/512x/mpc512x_shared.c
@@ -0,0 +1,66 @@
+/*
+ * Copyright (C) 2007,2008 Freescale Semiconductor, Inc. All rights reserved.
+ *
+ * Author: John Rigby <jrigby@freescale.com>
+ *
+ * Description:
+ * MPC512x Shared code
+ *
+ * This is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/of_platform.h>
+
+#include <asm/machdep.h>
+#include <asm/ipic.h>
+#include <asm/prom.h>
+#include <asm/time.h>
+
+#include "mpc512x.h"
+
+unsigned long
+mpc512x_find_ips_freq(struct device_node *node)
+{
+	struct device_node *np;
+	const unsigned int *p_ips_freq = NULL;
+
+	of_node_get(node);
+	while (node) {
+		p_ips_freq = of_get_property(node, "bus-frequency", NULL);
+		if (p_ips_freq)
+			break;
+
+		np = of_get_parent(node);
+		of_node_put(node);
+		node = np;
+	}
+	if (node)
+		of_node_put(node);
+
+	return p_ips_freq ? *p_ips_freq : 0;
+}
+EXPORT_SYMBOL(mpc512x_find_ips_freq);
+
+void __init mpc512x_init_IRQ(void)
+{
+	struct device_node *np;
+
+	np = of_find_compatible_node(NULL, NULL, "fsl,ipic");
+	if (!np)
+		return;
+
+	ipic_init(np, 0);
+	of_node_put(np);
+
+	/*
+	 * Initialize the default interrupt mapping priorities,
+	 * in case the boot rom changed something on us.
+	 */
+	ipic_set_default_priority();
+}
-- 
1.5.6.rc0.46.gd2b3

[PATCH 4/6] MPC5121 Add MPC5121ADS cpld support

[John Rigby]

Add a interrupt host for the interrupt
controller in the mpc5121ads cpld.
PCI interrupts are 0-7 the rest are 8-15
Touchscreen pendown irq is hardwired to irq1
All other irqs are chainged to irq0

Signed-off-by: John Rigby <jrigby@freescale.com>
---
 arch/powerpc/platforms/512x/Kconfig            |    1 +
 arch/powerpc/platforms/512x/Makefile           |    2 +-
 arch/powerpc/platforms/512x/mpc5121_ads.c      |   14 ++-
 arch/powerpc/platforms/512x/mpc5121_ads.h      |   14 ++
 arch/powerpc/platforms/512x/mpc5121_ads_cpld.c |  204 ++++++++++++++++++++++++
 5 files changed, 233 insertions(+), 2 deletions(-)
 create mode 100644 arch/powerpc/platforms/512x/mpc5121_ads.h
 create mode 100644 arch/powerpc/platforms/512x/mpc5121_ads_cpld.c

diff --git a/arch/powerpc/platforms/512x/Kconfig b/arch/powerpc/platforms/512x/Kconfig
index f9a04da..0fd3b00 100644
--- a/arch/powerpc/platforms/512x/Kconfig
+++ b/arch/powerpc/platforms/512x/Kconfig
@@ -12,6 +12,7 @@ config MPC5121_ADS
 	depends on PPC_MULTIPLATFORM && PPC32
 	select DEFAULT_UIMAGE
 	select PPC_MPC5121
+	select MPC5121_ADS_CPLD
 	help
 	  This option enables support for the MPC5121E ADS board.
 
diff --git a/arch/powerpc/platforms/512x/Makefile b/arch/powerpc/platforms/512x/Makefile
index e6674c8..aaa934b 100644
--- a/arch/powerpc/platforms/512x/Makefile
+++ b/arch/powerpc/platforms/512x/Makefile
@@ -2,5 +2,5 @@
 # Makefile for the Freescale PowerPC 512x linux kernel.
 #
 obj-y				:= clock.o mpc512x_shared.o
-obj-$(CONFIG_MPC5121_ADS)	+= mpc5121_ads.o
+obj-$(CONFIG_MPC5121_ADS)	+= mpc5121_ads.o mpc5121_ads_cpld.o
 obj-$(CONFIG_MPC5121_GENERIC)	+= mpc5121_generic.o
diff --git a/arch/powerpc/platforms/512x/mpc5121_ads.c b/arch/powerpc/platforms/512x/mpc5121_ads.c
index 45bb2ef..36805fd 100644
--- a/arch/powerpc/platforms/512x/mpc5121_ads.c
+++ b/arch/powerpc/platforms/512x/mpc5121_ads.c
@@ -1,5 +1,5 @@
 /*
- * Copyright (C) 2007 Freescale Semiconductor, Inc. All rights reserved.
+ * Copyright (C) 2007, 2008 Freescale Semiconductor, Inc. All rights reserved.
  *
  * Author: John Rigby, <jrigby@freescale.com>, Thur Mar 29 2007
  *
@@ -23,6 +23,16 @@
 #include <asm/time.h>
 
 #include "mpc512x.h"
+#include "mpc5121_ads.h"
+
+static void __init mpc5121_ads_setup_arch(void)
+{
+	printk(KERN_INFO "MPC5121 ADS board from Freescale Semiconductor\n");
+	/*
+	 * cpld regs are needed early
+	 */
+	mpc5121_ads_cpld_map();
+}
 
 static struct of_device_id __initdata of_bus_ids[] = {
 	{ .name = "soc", },
@@ -41,6 +51,7 @@ static void __init mpc5121_ads_declare_of_platform_devices(void)
 static void __init mpc5121_ads_init_IRQ(void)
 {
 	mpc512x_init_IRQ();
+	mpc5121_ads_cpld_pic_init();
 }
 
 /*
@@ -56,6 +67,7 @@ static int __init mpc5121_ads_probe(void)
 define_machine(mpc5121_ads) {
 	.name			= "MPC5121 ADS",
 	.probe			= mpc5121_ads_probe,
+	.setup_arch		= mpc5121_ads_setup_arch,
 	.init			= mpc5121_ads_declare_of_platform_devices,
 	.init_IRQ		= mpc5121_ads_init_IRQ,
 	.get_irq		= ipic_get_irq,
diff --git a/arch/powerpc/platforms/512x/mpc5121_ads.h b/arch/powerpc/platforms/512x/mpc5121_ads.h
new file mode 100644
index 0000000..885992e
--- /dev/null
+++ b/arch/powerpc/platforms/512x/mpc5121_ads.h
@@ -0,0 +1,14 @@
+/*
+ * Copyright (C) 2008 Freescale Semiconductor, Inc. All rights reserved.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#ifndef __MPC512ADS_H__
+#define __MPC512ADS_H__
+extern void __init mpc5121_ads_cpld_map(void);
+extern void __init mpc5121_ads_cpld_pic_init(void);
+#endif				/* __MPC512ADS_H__ */
diff --git a/arch/powerpc/platforms/512x/mpc5121_ads_cpld.c b/arch/powerpc/platforms/512x/mpc5121_ads_cpld.c
new file mode 100644
index 0000000..a6ce805
--- /dev/null
+++ b/arch/powerpc/platforms/512x/mpc5121_ads_cpld.c
@@ -0,0 +1,204 @@
+/*
+ * Copyright (C) 2008 Freescale Semiconductor, Inc. All rights reserved.
+ *
+ * Author: John Rigby, <jrigby@freescale.com>
+ *
+ * Description:
+ * MPC5121ADS CPLD irq handling
+ *
+ * This is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#undef DEBUG
+
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <asm/prom.h>
+
+static struct device_node *cpld_pic_node;
+static struct irq_host *cpld_pic_host;
+
+/*
+ * Bits to ignore in the misc_status register
+ * 0x10 touch screen pendown is hard routed to irq1
+ * 0x02 pci status is read from pci status register
+ */
+#define MISC_IGNORE 0x12
+
+/*
+ * Nothing to ignore in pci status register
+ */
+#define PCI_IGNORE 0x00
+
+struct cpld_pic {
+	u8 pci_mask;
+	u8 pci_status;
+	u8 route;
+	u8 misc_mask;
+	u8 misc_status;
+	u8 misc_control;
+};
+
+static struct cpld_pic __iomem *cpld_regs;
+
+static void __iomem *
+irq_to_pic_mask(unsigned int irq)
+{
+	return irq <= 7 ? &cpld_regs->pci_mask : &cpld_regs->misc_mask;
+}
+
+static unsigned int
+irq_to_pic_bit(unsigned int irq)
+{
+	return 1 << (irq & 0x7);
+}
+
+static void
+cpld_mask_irq(unsigned int irq)
+{
+	unsigned int cpld_irq = (unsigned int)irq_map[irq].hwirq;
+	void __iomem *pic_mask = irq_to_pic_mask(cpld_irq);
+
+	out_8(pic_mask,
+	      in_8(pic_mask) | irq_to_pic_bit(cpld_irq));
+}
+
+static void
+cpld_unmask_irq(unsigned int irq)
+{
+	unsigned int cpld_irq = (unsigned int)irq_map[irq].hwirq;
+	void __iomem *pic_mask = irq_to_pic_mask(cpld_irq);
+
+	out_8(pic_mask,
+	      in_8(pic_mask) & ~irq_to_pic_bit(cpld_irq));
+}
+
+static struct irq_chip cpld_pic = {
+	.typename = " CPLD PIC ",
+	.mask = cpld_mask_irq,
+	.ack = cpld_mask_irq,
+	.unmask = cpld_unmask_irq,
+};
+
+static int
+cpld_pic_get_irq(int offset, u8 ignore, u8 __iomem *statusp,
+			    u8 __iomem *maskp)
+{
+	int cpld_irq;
+	u8 status = in_8(statusp);
+	u8 mask = in_8(maskp);
+
+	/* ignore don't cares and masked irqs */
+	status |= (ignore | mask);
+
+	if (status == 0xff)
+		return NO_IRQ_IGNORE;
+
+	cpld_irq = ffz(status) + offset;
+
+	return irq_linear_revmap(cpld_pic_host, cpld_irq);
+}
+
+static void
+cpld_pic_cascade(unsigned int irq, struct irq_desc *desc)
+{
+	irq = cpld_pic_get_irq(0, PCI_IGNORE, &cpld_regs->pci_status,
+		&cpld_regs->pci_mask);
+	if (irq != NO_IRQ && irq != NO_IRQ_IGNORE) {
+		generic_handle_irq(irq);
+		return;
+	}
+
+	irq = cpld_pic_get_irq(8, MISC_IGNORE, &cpld_regs->misc_status,
+		&cpld_regs->misc_mask);
+	if (irq != NO_IRQ && irq != NO_IRQ_IGNORE) {
+		generic_handle_irq(irq);
+		return;
+	}
+}
+
+static int
+cpld_pic_host_match(struct irq_host *h, struct device_node *node)
+{
+	return cpld_pic_node == node;
+}
+
+static int
+cpld_pic_host_map(struct irq_host *h, unsigned int virq,
+			     irq_hw_number_t hw)
+{
+	get_irq_desc(virq)->status |= IRQ_LEVEL;
+	set_irq_chip_and_handler(virq, &cpld_pic, handle_level_irq);
+	return 0;
+}
+
+static struct
+irq_host_ops cpld_pic_host_ops = {
+	.match = cpld_pic_host_match,
+	.map = cpld_pic_host_map,
+};
+
+void __init
+mpc5121_ads_cpld_map(void)
+{
+	struct device_node *np = NULL;
+
+	np = of_find_compatible_node(NULL, NULL, "fsl,mpc5121ads-cpld-pic");
+	if (!np) {
+		printk(KERN_ERR "CPLD PIC init: can not find cpld-pic node\n");
+		return;
+	}
+
+	cpld_regs = of_iomap(np, 0);
+	of_node_put(np);
+}
+
+void __init
+mpc5121_ads_cpld_pic_init(void)
+{
+	unsigned int cascade_irq;
+	struct device_node *np = NULL;
+
+	pr_debug("cpld_ic_init\n");
+
+	np = of_find_compatible_node(NULL, NULL, "fsl,mpc5121ads-cpld-pic");
+	if (!np) {
+		printk(KERN_ERR "CPLD PIC init: can not find cpld-pic node\n");
+		return;
+	}
+
+	if (!cpld_regs)
+		goto end;
+
+	cascade_irq = irq_of_parse_and_map(np, 0);
+	if (cascade_irq == NO_IRQ)
+		goto end;
+
+	/*
+	 * statically route touch screen pendown through 1
+	 * and ignore it here
+	 * route all others through our cascade irq
+	 */
+	out_8(&cpld_regs->route, 0xfd);
+	out_8(&cpld_regs->pci_mask, 0xff);
+	/* unmask pci ints in misc mask */
+	out_8(&cpld_regs->misc_mask, ~(MISC_IGNORE));
+
+	cpld_pic_node = of_node_get(np);
+
+	cpld_pic_host =
+	    irq_alloc_host(np, IRQ_HOST_MAP_LINEAR, 16, &cpld_pic_host_ops, 16);
+	if (!cpld_pic_host) {
+		printk(KERN_ERR "CPLD PIC: failed to allocate irq host!\n");
+		goto end;
+	}
+
+	set_irq_chained_handler(cascade_irq, cpld_pic_cascade);
+end:
+	of_node_put(np);
+}
-- 
1.5.6.rc0.46.gd2b3

[PATCH 5/6] MPC5121 Add PCI support

[John Rigby]

Copied from 83xx minus support for two busses.

Signed-off-by: John Rigby <jrigby@freescale.com>
---
 arch/powerpc/Kconfig                      |    2 +-
 arch/powerpc/platforms/512x/Kconfig       |    1 +
 arch/powerpc/platforms/512x/Makefile      |    1 +
 arch/powerpc/platforms/512x/mpc5121_ads.c |   10 ++++
 arch/powerpc/platforms/512x/mpc512x.h     |    1 +
 arch/powerpc/platforms/512x/pci.c         |   84 +++++++++++++++++++++++++++++
 6 files changed, 98 insertions(+), 1 deletions(-)
 create mode 100644 arch/powerpc/platforms/512x/pci.c

diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index 3934e26..5a467a1 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -545,7 +545,7 @@ config MCA
 config PCI
 	bool "PCI support" if 40x || CPM2 || PPC_83xx || PPC_85xx || PPC_86xx \
 		|| PPC_MPC52xx || (EMBEDDED && (PPC_PSERIES || PPC_ISERIES)) \
-		|| PPC_PS3 || 44x
+		|| PPC_PS3 || 44x || PPC_MPC512x
 	default y if !40x && !CPM2 && !8xx && !PPC_MPC512x && !PPC_83xx \
 		&& !PPC_85xx && !PPC_86xx
 	default PCI_PERMEDIA if !4xx && !CPM2 && !8xx
diff --git a/arch/powerpc/platforms/512x/Kconfig b/arch/powerpc/platforms/512x/Kconfig
index 0fd3b00..a0eae56 100644
--- a/arch/powerpc/platforms/512x/Kconfig
+++ b/arch/powerpc/platforms/512x/Kconfig
@@ -2,6 +2,7 @@ config PPC_MPC512x
 	bool
 	select FSL_SOC
 	select IPIC
+	select PPC_INDIRECT_PCI
 
 config PPC_MPC5121
 	bool
diff --git a/arch/powerpc/platforms/512x/Makefile b/arch/powerpc/platforms/512x/Makefile
index aaa934b..3292b44 100644
--- a/arch/powerpc/platforms/512x/Makefile
+++ b/arch/powerpc/platforms/512x/Makefile
@@ -4,3 +4,4 @@
 obj-y				:= clock.o mpc512x_shared.o
 obj-$(CONFIG_MPC5121_ADS)	+= mpc5121_ads.o mpc5121_ads_cpld.o
 obj-$(CONFIG_MPC5121_GENERIC)	+= mpc5121_generic.o
+obj-$(CONFIG_PCI)		+= pci.o
diff --git a/arch/powerpc/platforms/512x/mpc5121_ads.c b/arch/powerpc/platforms/512x/mpc5121_ads.c
index 36805fd..dd533ff 100644
--- a/arch/powerpc/platforms/512x/mpc5121_ads.c
+++ b/arch/powerpc/platforms/512x/mpc5121_ads.c
@@ -22,16 +22,26 @@
 #include <asm/prom.h>
 #include <asm/time.h>
 
+#include <sysdev/fsl_soc.h>
+
 #include "mpc512x.h"
 #include "mpc5121_ads.h"
 
 static void __init mpc5121_ads_setup_arch(void)
 {
+#ifdef CONFIG_PCI
+	struct device_node *np;
+#endif
 	printk(KERN_INFO "MPC5121 ADS board from Freescale Semiconductor\n");
 	/*
 	 * cpld regs are needed early
 	 */
 	mpc5121_ads_cpld_map();
+
+#ifdef CONFIG_PCI
+	for_each_compatible_node(np, "pci", "fsl,mpc5121-pci")
+		mpc512x_add_bridge(np);
+#endif
 }
 
 static struct of_device_id __initdata of_bus_ids[] = {
diff --git a/arch/powerpc/platforms/512x/mpc512x.h b/arch/powerpc/platforms/512x/mpc512x.h
index 789b817..be30915 100644
--- a/arch/powerpc/platforms/512x/mpc512x.h
+++ b/arch/powerpc/platforms/512x/mpc512x.h
@@ -11,4 +11,5 @@
 #define __MPC512X_H__
 extern unsigned long mpc512x_find_ips_freq(struct device_node *node);
 extern void __init mpc512x_init_IRQ(void);
+extern int mpc512x_add_bridge(struct device_node *dev);
 #endif				/* __MPC512X_H__ */
diff --git a/arch/powerpc/platforms/512x/pci.c b/arch/powerpc/platforms/512x/pci.c
new file mode 100644
index 0000000..7ed9b34
--- /dev/null
+++ b/arch/powerpc/platforms/512x/pci.c
@@ -0,0 +1,84 @@
+/*
+ * Copyright (C) 2008 Freescale Semiconductor, Inc. All rights reserved.
+ *
+ * Original copied from 83xx/pci.c:
+ *
+ *     FSL SoC setup code
+ *
+ *     Maintained by Kumar Gala (see MAINTAINERS for contact information)
+ *
+ *     This program is free software; you can redistribute  it and/or modify it
+ *     under  the terms of  the GNU General  Public License as published by the
+ *     Free Software Foundation;  either version 2 of the  License, or (at your
+ *     option) any later version.
+ */
+
+#include <linux/stddef.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/pci.h>
+#include <linux/delay.h>
+#include <linux/irq.h>
+#include <linux/module.h>
+#include <linux/io.h>
+
+#include <asm/system.h>
+#include <asm/atomic.h>
+#include <asm/pci-bridge.h>
+#include <asm/prom.h>
+#include <sysdev/fsl_soc.h>
+
+#undef DEBUG
+
+#ifdef DEBUG
+#define DBG(x...) printk(x)
+#else
+#define DBG(x...)
+#endif
+
+int __init mpc512x_add_bridge(struct device_node *dev)
+{
+	int len;
+	struct pci_controller *hose;
+	struct resource rsrc;
+	const int *bus_range;
+	int has_address = 0;
+	phys_addr_t immr = get_immrbase();
+
+	DBG("Adding PCI host bridge %s\n", dev->full_name);
+
+	/* Fetch host bridge registers address */
+	has_address = (of_address_to_resource(dev, 0, &rsrc) == 0);
+
+	/* Get bus range if any */
+	bus_range = of_get_property(dev, "bus-range", &len);
+	if (bus_range == NULL || len < 2 * sizeof(int)) {
+		printk(KERN_WARNING "Can't get bus-range for %s, assume"
+		       " bus 0\n", dev->full_name);
+	}
+
+	ppc_pci_flags |= PPC_PCI_REASSIGN_ALL_BUS;
+	hose = pcibios_alloc_controller(dev);
+	if (!hose)
+		return -ENOMEM;
+
+	hose->first_busno = bus_range ? bus_range[0] : 0;
+	hose->last_busno = bus_range ? bus_range[1] : 0xff;
+
+	setup_indirect_pci(hose, immr + 0x8300, immr + 0x8304, 0);
+
+	printk(KERN_INFO "Found MPC512x PCI host bridge at 0x%016llx. "
+	       "Firmware bus number: %d->%d\n",
+	       (unsigned long long)rsrc.start, hose->first_busno,
+	       hose->last_busno);
+
+	DBG(" ->Hose at 0x%p, cfg_addr=0x%p,cfg_data=0x%p\n",
+	    hose, hose->cfg_addr, hose->cfg_data);
+
+	/* Interpret the "ranges" property */
+	/* This also maps the I/O region and sets isa_io/mem_base */
+	pci_process_bridge_OF_ranges(hose, dev, 1);
+
+	return 0;
+}
-- 
1.5.6.rc0.46.gd2b3

[PATCH 6/6] MPC5121 Hide pci bridge

[John Rigby]

The class of the MPC5121 pci host bridge is PCI_CLASS_BRIDGE_OTHER
while other freescale host bridges have class set to
PCI_CLASS_PROCESSOR_POWERPC.

This patch makes fixup_hide_host_resource_fsl match
PCI_CLASS_BRIDGE_OTHER in addition to PCI_CLASS_PROCESSOR_POWERPC.

Signed-off-by: John Rigby <jrigby@freescale.com>
---
 arch/powerpc/kernel/pci_32.c |    5 +++--
 1 files changed, 3 insertions(+), 2 deletions(-)

diff --git a/arch/powerpc/kernel/pci_32.c b/arch/powerpc/kernel/pci_32.c
index 88db4ff..3d33935 100644
--- a/arch/powerpc/kernel/pci_32.c
+++ b/arch/powerpc/kernel/pci_32.c
@@ -54,11 +54,12 @@ LIST_HEAD(hose_list);
 static int pci_bus_count;
 
 static void
-fixup_hide_host_resource_fsl(struct pci_dev* dev)
+fixup_hide_host_resource_fsl(struct pci_dev *dev)
 {
 	int i, class = dev->class >> 8;
 
-	if ((class == PCI_CLASS_PROCESSOR_POWERPC) &&
+	if ((class == PCI_CLASS_PROCESSOR_POWERPC
+		    || class == PCI_CLASS_BRIDGE_OTHER) &&
 		(dev->hdr_type == PCI_HEADER_TYPE_NORMAL) &&
 		(dev->bus->parent == NULL)) {
 		for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) {
-- 
1.5.6.rc0.46.gd2b3

Re: [PATCH 5/6] MPC5121 Add PCI support

[Kumar Gala]

On Jun 20, 2008, at 11:58 AM, John Rigby wrote:

> Copied from 83xx minus support for two busses.
>
> Signed-off-by: John Rigby <jrigby@freescale.com>
> ---
> arch/powerpc/Kconfig                      |    2 +-
> arch/powerpc/platforms/512x/Kconfig       |    1 +
> arch/powerpc/platforms/512x/Makefile      |    1 +
> arch/powerpc/platforms/512x/mpc5121_ads.c |   10 ++++
> arch/powerpc/platforms/512x/mpc512x.h     |    1 +
> arch/powerpc/platforms/512x/pci.c         |   84 ++++++++++++++++++++ 
> +++++++++
> 6 files changed, 98 insertions(+), 1 deletions(-)
> create mode 100644 arch/powerpc/platforms/512x/pci.c
>
> diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
> index 3934e26..5a467a1 100644
> --- a/arch/powerpc/Kconfig
> +++ b/arch/powerpc/Kconfig
> @@ -545,7 +545,7 @@ config MCA
> config PCI
> 	bool "PCI support" if 40x || CPM2 || PPC_83xx || PPC_85xx ||  
> PPC_86xx \
> 		|| PPC_MPC52xx || (EMBEDDED && (PPC_PSERIES || PPC_ISERIES)) \
> -		|| PPC_PS3 || 44x
> +		|| PPC_PS3 || 44x || PPC_MPC512x

is it possible to select PCI rather than adding to the madness here?

>
> 	default y if !40x && !CPM2 && !8xx && !PPC_MPC512x && !PPC_83xx \
> 		&& !PPC_85xx && !PPC_86xx
> 	default PCI_PERMEDIA if !4xx && !CPM2 && !8xx


> diff --git a/arch/powerpc/platforms/512x/pci.c b/arch/powerpc/ 
> platforms/512x/pci.c
> new file mode 100644
> index 0000000..7ed9b34
> --- /dev/null
> +++ b/arch/powerpc/platforms/512x/pci.c
> @@ -0,0 +1,84 @@
> +/*
> + * Copyright (C) 2008 Freescale Semiconductor, Inc. All rights  
> reserved.
> + *
> + * Original copied from 83xx/pci.c:

Can we not reuse the same code for 83xx/pci.c and 5121/pci?  and move  
it into sysdev/fsl_pci.c?  (we'd add some ifdefs for 83xx & 5121)

- k

Re: [PATCH 5/6] MPC5121 Add PCI support

[Scott Wood]

Kumar Gala wrote:
>> diff --git a/arch/powerpc/platforms/512x/pci.c 
>> b/arch/powerpc/platforms/512x/pci.c
>> new file mode 100644
>> index 0000000..7ed9b34
>> --- /dev/null
>> +++ b/arch/powerpc/platforms/512x/pci.c
>> @@ -0,0 +1,84 @@
>> +/*
>> + * Copyright (C) 2008 Freescale Semiconductor, Inc. All rights reserved.
>> + *
>> + * Original copied from 83xx/pci.c:
> 
> Can we not reuse the same code for 83xx/pci.c and 5121/pci?  and move it 
> into sysdev/fsl_pci.c?  (we'd add some ifdefs for 83xx & 5121)

I assume by "ifdefs" you mean "device tree checks", right? :-)

-Scott

Re: [PATCH 2/6] MPC5121 clock driver

[Stephen Rothwell]

[-- Attachment #1: Type: text/plain, Size: 760 bytes --]

Hi John,

On Fri, 20 Jun 2008 10:58:35 -0600 John Rigby <jrigby@freescale.com> wrote:
>
> +struct module;

Since you include linux/module.h, you don't need this.

> +static unsigned long devtree_getfreq(char *nodetype, char *clockname)
> +{
> +	struct device_node *node;
> +	const unsigned int *fp;
> +	unsigned int val = 0;
> +
> +	node = of_find_node_by_type(NULL, "soc");
> +	if (node) {
> +		fp = of_get_property(node, clockname, NULL);
> +		if (fp)
> +			val = of_read_ulong(fp, 1);
> +	}
> +	return val;

You leak a reference to the node here. Also every call has nodetype set to
"soc" and you don't use nodetype anyway.

-- 
Cheers,
Stephen Rothwell                    sfr@canb.auug.org.au
http://www.canb.auug.org.au/~sfr/

[-- Attachment #2: Type: application/pgp-signature, Size: 197 bytes --]

Re: [PATCH 2/6] MPC5121 clock driver

[Grant Likely]

Mostly looks good, a few comments below.

On Fri, Jun 20, 2008 at 10:58:35AM -0600, John Rigby wrote:
> Implements the api defined in include/clk.h
> 
> Current only getting frequencies is supported
> not setting.

Need a more detailed commit message.  This doesn't tell me much.

> 
> Signed-off-by: John Rigby <jrigby@freescale.com>
> ---
>  arch/powerpc/platforms/512x/Makefile |    1 +
>  arch/powerpc/platforms/512x/clock.c  |  729 ++++++++++++++++++++++++++++++++++
>  2 files changed, 730 insertions(+), 0 deletions(-)
>  create mode 100644 arch/powerpc/platforms/512x/clock.c
> 
> diff --git a/arch/powerpc/platforms/512x/Makefile b/arch/powerpc/platforms/512x/Makefile
> index 232c89f..ef6c925 100644
> --- a/arch/powerpc/platforms/512x/Makefile
> +++ b/arch/powerpc/platforms/512x/Makefile
> @@ -1,4 +1,5 @@
>  #
>  # Makefile for the Freescale PowerPC 512x linux kernel.
>  #
> +obj-y				:= clock.o

should be +=

>  obj-$(CONFIG_MPC5121_ADS)	+= mpc5121_ads.o
> diff --git a/arch/powerpc/platforms/512x/clock.c b/arch/powerpc/platforms/512x/clock.c
> new file mode 100644
> index 0000000..39db722
> --- /dev/null
> +++ b/arch/powerpc/platforms/512x/clock.c
> @@ -0,0 +1,729 @@
> +/*
> + * Copyright (C) 2007,2008 Freescale Semiconductor, Inc. All rights reserved.
> + *
> + * Author: John Rigby <jrigby@freescale.com>
> + *
> + * Implements the clk api defined in include/linux/clk.h
> + *
> + *    Original based on linux/arch/arm/mach-integrator/clock.c
> + *
> + *    Copyright (C) 2004 ARM Limited.
> + *    Written by Deep Blue Solutions Limited.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +#include <linux/module.h>
> +#include <linux/kernel.h>
> +#include <linux/list.h>
> +#include <linux/errno.h>
> +#include <linux/err.h>
> +#include <linux/string.h>
> +#include <linux/clk.h>
> +#include <linux/mutex.h>
> +#include <linux/io.h>
> +
> +#include <linux/of_platform.h>
> +#include <asm/mpc512x.h>
> +
> +static int clocks_initialized;
> +
> +struct module;

This is already defined in linux/module.h?

> +
> +#undef CLK_DEBUG

I think this line should be at the top of the file to be easier to find
when toggling it.

> +#ifdef CLK_DEBUG
> +void dump_clocks(void)
> +{
> +	struct clk *p;
> +
> +	mutex_lock(&clocks_mutex);
> +	printk(KERN_INFO "CLOCKS:\n");
> +	list_for_each_entry(p, &clocks, node) {
> +		printk(KERN_INFO "  %s %ld", p->name, p->rate);
> +		if (p->parent)
> +			printk(KERN_INFO " %s %ld", p->parent->name,
> +			       p->parent->rate);
> +		if (p->flags & CLK_HAS_CTRL)
> +			printk(KERN_INFO " reg/bit %d/%d", p->reg, p->bit);
> +		printk("\n");
> +	}
> +	mutex_unlock(&clocks_mutex);
> +}
> +#define	DEBUG_CLK_DUMP() dump_clocks()
> +#else
> +#define	DEBUG_CLK_DUMP()
> +#endif
> +
> +static long ips_to_ref(unsigned long rate)
> +{
> +	int ips_div = (clockctl->scfr1 >> 23) & 0x7;
> +
> +	rate *= ips_div;	/* csb_clk = ips_clk * ips_div */
> +	rate *= 2;		/* sys_clk = csb_clk * 2 */
> +	return sys_to_ref(rate);
> +}
> +
> +static unsigned long devtree_getfreq(char *nodetype, char *clockname)

Why is nodetype even passed in here?  It isn't used, and besides, you
shouldn't test against device_type anyway.  Test against compatible
instead.

> +{
> +	struct device_node *node;
> +	const unsigned int *fp;
> +	unsigned int val = 0;
> +
> +	node = of_find_node_by_type(NULL, "soc");

Once again; don't look for device_type == "soc".  Use compatible.

> +	if (node) {
> +		fp = of_get_property(node, clockname, NULL);
> +		if (fp)
> +			val = of_read_ulong(fp, 1);
> +	}
> +	return val;
> +}
> +
> +static void ref_clk_calc(struct clk *clk)
> +{
> +	unsigned long rate;
> +
> +	rate = devtree_getfreq("soc", "ref-frequency");
> +	if (rate == 0) {
> +		/*
> +		 * no reference clock in device tree
> +		 * get ips clock freq and go backwards from there
> +		 */
> +		rate = devtree_getfreq("soc", "bus-frequency");
> +		if (rate == 0) {
> +			printk(KERN_WARNING
> +				"No bus-frequency in dev tree using 66MHz\n");
> +			clk->rate = 66000000;

Is it even worth trying to use a default here?  I think it should fail
loudly instead to reduce the risk of people shipping boards with badly
formed device trees.  I don't think there is any backwards compatibility
need for doing this.

Re: [PATCH 3/6] MPC5121 Add generic board support

[Grant Likely]

Mostly looks good, but a few comments below.

On Fri, Jun 20, 2008 at 10:58:36AM -0600, John Rigby wrote:
> Move shared code from mpc5121_ads.c to mpc512x_shared.c.
> Add new generic board setup mpc5121_generic.c
> 
> Signed-off-by: John Rigby <jrigby@freescale.com>
> ---
>  arch/powerpc/platforms/512x/Kconfig           |   15 ++++-
>  arch/powerpc/platforms/512x/Makefile          |    3 +-
>  arch/powerpc/platforms/512x/mpc5121_ads.c     |   45 +---------------
>  arch/powerpc/platforms/512x/mpc5121_generic.c |   72 +++++++++++++++++++++++++
>  arch/powerpc/platforms/512x/mpc512x.h         |   14 +++++
>  arch/powerpc/platforms/512x/mpc512x_shared.c  |   66 ++++++++++++++++++++++
>  6 files changed, 168 insertions(+), 47 deletions(-)
>  create mode 100644 arch/powerpc/platforms/512x/mpc5121_generic.c
>  create mode 100644 arch/powerpc/platforms/512x/mpc512x.h
>  create mode 100644 arch/powerpc/platforms/512x/mpc512x_shared.c
> 
> diff --git a/arch/powerpc/platforms/512x/Kconfig b/arch/powerpc/platforms/512x/Kconfig
> index 4c0da0c..f9a04da 100644
> --- a/arch/powerpc/platforms/512x/Kconfig
> +++ b/arch/powerpc/platforms/512x/Kconfig
> @@ -2,12 +2,10 @@ config PPC_MPC512x
>  	bool
>  	select FSL_SOC
>  	select IPIC
> -	default n
>  
>  config PPC_MPC5121
>  	bool
>  	select PPC_MPC512x
> -	default n
>  
>  config MPC5121_ADS
>  	bool "Freescale MPC5121E ADS"
> @@ -16,4 +14,15 @@ config MPC5121_ADS
>  	select PPC_MPC5121
>  	help
>  	  This option enables support for the MPC5121E ADS board.
> -	default n
> +
> +config MPC5121_GENERIC
> +	bool "Generic support for simple MPC5121 based boards"
> +	depends on PPC_MULTIPLATFORM && PPC32
> +	select DEFAULT_UIMAGE
> +	select PPC_MPC5121
> +	help
> +	  This option enables support for simple MPC5121 based boards
> +	  which do not need custome platform specific setup.

typo

> +
> +	  Compatible boards include:  Protonic LVT base boards (ZANMCU
> +	  and VICVT2).
> diff --git a/arch/powerpc/platforms/512x/Makefile b/arch/powerpc/platforms/512x/Makefile
> index ef6c925..e6674c8 100644
> --- a/arch/powerpc/platforms/512x/Makefile
> +++ b/arch/powerpc/platforms/512x/Makefile
> @@ -1,5 +1,6 @@
>  #
>  # Makefile for the Freescale PowerPC 512x linux kernel.
>  #
> -obj-y				:= clock.o
> +obj-y				:= clock.o mpc512x_shared.o
>  obj-$(CONFIG_MPC5121_ADS)	+= mpc5121_ads.o
> +obj-$(CONFIG_MPC5121_GENERIC)	+= mpc5121_generic.o
> diff --git a/arch/powerpc/platforms/512x/mpc5121_ads.c b/arch/powerpc/platforms/512x/mpc5121_ads.c
> index 50bd3a3..45bb2ef 100644
> --- a/arch/powerpc/platforms/512x/mpc5121_ads.c
> +++ b/arch/powerpc/platforms/512x/mpc5121_ads.c
> @@ -68,20 +40,7 @@ static void __init mpc5121_ads_declare_of_platform_devices(void)
>  
>  static void __init mpc5121_ads_init_IRQ(void)
>  {
> -	struct device_node *np;
> -
> -	np = of_find_compatible_node(NULL, NULL, "fsl,ipic");
> -	if (!np)
> -		return;
> -
> -	ipic_init(np, 0);
> -	of_node_put(np);
> -
> -	/*
> -	 * Initialize the default interrupt mapping priorities,
> -	 * in case the boot rom changed something on us.
> -	 */
> -	ipic_set_default_priority();
> +	mpc512x_init_IRQ();
>  }

Why not just put mpc512x_init_IRQ directly into the machine structure?
>  
>  /*
> diff --git a/arch/powerpc/platforms/512x/mpc5121_generic.c b/arch/powerpc/platforms/512x/mpc5121_generic.c
> new file mode 100644
> index 0000000..0111a98
> --- /dev/null
> +++ b/arch/powerpc/platforms/512x/mpc5121_generic.c
> @@ -0,0 +1,72 @@
> +/*
> + * Copyright (C) 2007,2008 Freescale Semiconductor, Inc. All rights reserved.
> + *
> + * Author: John Rigby, <jrigby@freescale.com>
> + *
> + * Description:
> + * MPC5121 SoC setup
> + *
> + * This is free software; you can redistribute it and/or modify it
> + * under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + *
> + */
> +
> +#include <linux/kernel.h>
> +#include <linux/of_platform.h>
> +
> +#include <asm/machdep.h>
> +#include <asm/ipic.h>
> +#include <asm/prom.h>
> +#include <asm/time.h>
> +
> +#include "mpc512x.h"
> +
> +static struct of_device_id __initdata of_bus_ids[] = {
> +	{ .name = "soc", },
> +	{ .name = "localbus", },

Ugh.  Not good.  Bind against compatible, not name or type.

> +	{},
> +};
> +
> +static void __init mpc5121_generic_declare_of_platform_devices(void)
> +{
> +	/* Find every child of the SOC node and add it to of_platform */
> +	if (of_platform_bus_probe(NULL, of_bus_ids, NULL))
> +		printk(KERN_ERR __FILE__ ": "
> +			"Error while probing of_platform bus\n");
> +}
> +
> +/*
> + * list of supported boards
> + */
> +static char *board[] __initdata = {
> +	"prt,prtlvt",
> +	NULL
> +};
> +
> +/*
> + * Called very early, MMU is off, device-tree isn't unflattened
> + */
> +static int __init mpc5121_generic_probe(void)
> +{
> +	unsigned long node = of_get_flat_dt_root();
> +	int i = 0;
> +
> +	while (board[i]) {
> +		if (of_flat_dt_is_compatible(node, board[i]))
> +			break;
> +		i++;
> +	}
> +
> +	return board[i] != NULL;
> +}
> +
> +define_machine(mpc5121_generic) {
> +	.name			= "MPC5121 generic",
> +	.probe			= mpc5121_generic_probe,
> +	.init			= mpc5121_generic_declare_of_platform_devices,
> +	.init_IRQ		= mpc512x_init_IRQ,
> +	.get_irq		= ipic_get_irq,
> +	.calibrate_decr		= generic_calibrate_decr,
> +};
> diff --git a/arch/powerpc/platforms/512x/mpc512x.h b/arch/powerpc/platforms/512x/mpc512x.h
> new file mode 100644
> index 0000000..789b817
> --- /dev/null
> +++ b/arch/powerpc/platforms/512x/mpc512x.h
> @@ -0,0 +1,14 @@
> +/*
> + * Copyright (C) 2007 Freescale Semiconductor, Inc. All rights reserved.
> + *
> + * This program is free software; you can redistribute  it and/or modify it
> + * under  the terms of  the GNU General  Public License as published by the
> + * Free Software Foundation;  either version 2 of the  License, or (at your
> + * option) any later version.
> + */

Should probably state what this file is for in the header block.

> diff --git a/arch/powerpc/platforms/512x/mpc512x_shared.c b/arch/powerpc/platforms/512x/mpc512x_shared.c
> new file mode 100644
> index 0000000..4b8fe6a
> --- /dev/null
> +++ b/arch/powerpc/platforms/512x/mpc512x_shared.c
> @@ -0,0 +1,66 @@
> +/*
> + * Copyright (C) 2007,2008 Freescale Semiconductor, Inc. All rights reserved.
> + *
> + * Author: John Rigby <jrigby@freescale.com>
> + *
> + * Description:
> + * MPC512x Shared code
> + *
> + * This is free software; you can redistribute it and/or modify it
> + * under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + */
> +
> +#include <linux/kernel.h>
> +#include <linux/io.h>
> +#include <linux/irq.h>
> +#include <linux/of_platform.h>
> +
> +#include <asm/machdep.h>
> +#include <asm/ipic.h>
> +#include <asm/prom.h>
> +#include <asm/time.h>
> +
> +#include "mpc512x.h"
> +
> +unsigned long
> +mpc512x_find_ips_freq(struct device_node *node)
> +{
> +	struct device_node *np;
> +	const unsigned int *p_ips_freq = NULL;
> +
> +	of_node_get(node);
> +	while (node) {
> +		p_ips_freq = of_get_property(node, "bus-frequency", NULL);
> +		if (p_ips_freq)
> +			break;
> +
> +		np = of_get_parent(node);
> +		of_node_put(node);
> +		node = np;
> +	}
> +	if (node)
> +		of_node_put(node);
> +
> +	return p_ips_freq ? *p_ips_freq : 0;
> +}
> +EXPORT_SYMBOL(mpc512x_find_ips_freq);

This looks identical to the 52xx version.  Perhaps they should be
merged... I wouldn't bother for getting this mainlined, but it is
something to think about for the future.

g.

Re: [PATCH 4/6] MPC5121 Add MPC5121ADS cpld support

[Grant Likely]

Minor comments below.

On Fri, Jun 20, 2008 at 10:58:37AM -0600, John Rigby wrote:
> Add a interrupt host for the interrupt
> controller in the mpc5121ads cpld.
> PCI interrupts are 0-7 the rest are 8-15
> Touchscreen pendown irq is hardwired to irq1
> All other irqs are chainged to irq0
> 
> Signed-off-by: John Rigby <jrigby@freescale.com>
> ---
>  arch/powerpc/platforms/512x/Kconfig            |    1 +
>  arch/powerpc/platforms/512x/Makefile           |    2 +-
>  arch/powerpc/platforms/512x/mpc5121_ads.c      |   14 ++-
>  arch/powerpc/platforms/512x/mpc5121_ads.h      |   14 ++
>  arch/powerpc/platforms/512x/mpc5121_ads_cpld.c |  204 ++++++++++++++++++++++++
>  5 files changed, 233 insertions(+), 2 deletions(-)
>  create mode 100644 arch/powerpc/platforms/512x/mpc5121_ads.h
>  create mode 100644 arch/powerpc/platforms/512x/mpc5121_ads_cpld.c
> 
> diff --git a/arch/powerpc/platforms/512x/Kconfig b/arch/powerpc/platforms/512x/Kconfig
> index f9a04da..0fd3b00 100644
> --- a/arch/powerpc/platforms/512x/Kconfig
> +++ b/arch/powerpc/platforms/512x/Kconfig
> @@ -12,6 +12,7 @@ config MPC5121_ADS
>  	depends on PPC_MULTIPLATFORM && PPC32
>  	select DEFAULT_UIMAGE
>  	select PPC_MPC5121
> +	select MPC5121_ADS_CPLD

What is this for?  I don't see it used anywhere.

>  	help
>  	  This option enables support for the MPC5121E ADS board.
>  
> diff --git a/arch/powerpc/platforms/512x/mpc5121_ads.c b/arch/powerpc/platforms/512x/mpc5121_ads.c
> index 45bb2ef..36805fd 100644
> --- a/arch/powerpc/platforms/512x/mpc5121_ads.c
> +++ b/arch/powerpc/platforms/512x/mpc5121_ads.c
> @@ -1,5 +1,5 @@
>  /*
> - * Copyright (C) 2007 Freescale Semiconductor, Inc. All rights reserved.
> + * Copyright (C) 2007, 2008 Freescale Semiconductor, Inc. All rights reserved.
>   *
>   * Author: John Rigby, <jrigby@freescale.com>, Thur Mar 29 2007
>   *
> @@ -23,6 +23,16 @@
>  #include <asm/time.h>
>  
>  #include "mpc512x.h"
> +#include "mpc5121_ads.h"
> +
> +static void __init mpc5121_ads_setup_arch(void)
> +{
> +	printk(KERN_INFO "MPC5121 ADS board from Freescale Semiconductor\n");
> +	/*
> +	 * cpld regs are needed early
> +	 */
> +	mpc5121_ads_cpld_map();
> +}
>  
>  static struct of_device_id __initdata of_bus_ids[] = {
>  	{ .name = "soc", },
> @@ -41,6 +51,7 @@ static void __init mpc5121_ads_declare_of_platform_devices(void)
>  static void __init mpc5121_ads_init_IRQ(void)
>  {
>  	mpc512x_init_IRQ();
> +	mpc5121_ads_cpld_pic_init();

Ah, I understand now.  Ignore my related comment in the previous patch.

>  }
>  
>  /*

Re: [PATCH 5/6] MPC5121 Add PCI support

[Grant Likely]

On Fri, Jun 20, 2008 at 10:58:38AM -0600, John Rigby wrote:
> Copied from 83xx minus support for two busses.

If this is a copy, then can it be shared?

g.

Re: [PATCH 6/6] MPC5121 Hide pci bridge

[Grant Likely]

On Fri, Jun 20, 2008 at 10:58:39AM -0600, John Rigby wrote:
> The class of the MPC5121 pci host bridge is PCI_CLASS_BRIDGE_OTHER
> while other freescale host bridges have class set to
> PCI_CLASS_PROCESSOR_POWERPC.
> 
> This patch makes fixup_hide_host_resource_fsl match
> PCI_CLASS_BRIDGE_OTHER in addition to PCI_CLASS_PROCESSOR_POWERPC.
> 
> Signed-off-by: John Rigby <jrigby@freescale.com>

This looks right to me, but I'm not really qualified to say if it is
correct or not (limited PCI experience).  I don't know who needs to look
at it.  Kumar perhaps?

Cheers,
g.

> ---
>  arch/powerpc/kernel/pci_32.c |    5 +++--
>  1 files changed, 3 insertions(+), 2 deletions(-)
> 
> diff --git a/arch/powerpc/kernel/pci_32.c b/arch/powerpc/kernel/pci_32.c
> index 88db4ff..3d33935 100644
> --- a/arch/powerpc/kernel/pci_32.c
> +++ b/arch/powerpc/kernel/pci_32.c
> @@ -54,11 +54,12 @@ LIST_HEAD(hose_list);
>  static int pci_bus_count;
>  
>  static void
> -fixup_hide_host_resource_fsl(struct pci_dev* dev)
> +fixup_hide_host_resource_fsl(struct pci_dev *dev)
>  {
>  	int i, class = dev->class >> 8;
>  
> -	if ((class == PCI_CLASS_PROCESSOR_POWERPC) &&
> +	if ((class == PCI_CLASS_PROCESSOR_POWERPC
> +		    || class == PCI_CLASS_BRIDGE_OTHER) &&
>  		(dev->hdr_type == PCI_HEADER_TYPE_NORMAL) &&
>  		(dev->bus->parent == NULL)) {
>  		for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) {
> -- 
> 1.5.6.rc0.46.gd2b3
> 
> _______________________________________________
> Linuxppc-dev mailing list
> Linuxppc-dev@ozlabs.org
> https://ozlabs.org/mailman/listinfo/linuxppc-dev

Re: [PATCH 5/6] MPC5121 Add PCI support

[John Rigby]

Yes, Kumar made the same comment.  The newer patch that moves the 83xx
add bridge routine to fsl_soc obsoletes this patch.

On Sat, Jun 28, 2008 at 11:38 PM, Grant Likely
<grant.likely@secretlab.ca> wrote:
> On Fri, Jun 20, 2008 at 10:58:38AM -0600, John Rigby wrote:
>> Copied from 83xx minus support for two busses.
>
> If this is a copy, then can it be shared?
>
> g.
>
> _______________________________________________
> Linuxppc-dev mailing list
> Linuxppc-dev@ozlabs.org
> https://ozlabs.org/mailman/listinfo/linuxppc-dev
>

Re: [PATCH 4/6] MPC5121 Add MPC5121ADS cpld support

[John Rigby]

On Sat, Jun 28, 2008 at 11:36 PM, Grant Likely
<grant.likely@secretlab.ca> wrote:
> Minor comments below.
>
> On Fri, Jun 20, 2008 at 10:58:37AM -0600, John Rigby wrote:
>> Add a interrupt host for the interrupt
>> controller in the mpc5121ads cpld.
>> PCI interrupts are 0-7 the rest are 8-15
>> Touchscreen pendown irq is hardwired to irq1
>> All other irqs are chainged to irq0
>>
>> Signed-off-by: John Rigby <jrigby@freescale.com>
>> ---
>>  arch/powerpc/platforms/512x/Kconfig            |    1 +
>>  arch/powerpc/platforms/512x/Makefile           |    2 +-
>>  arch/powerpc/platforms/512x/mpc5121_ads.c      |   14 ++-
>>  arch/powerpc/platforms/512x/mpc5121_ads.h      |   14 ++
>>  arch/powerpc/platforms/512x/mpc5121_ads_cpld.c |  204 ++++++++++++++++++++++++
>>  5 files changed, 233 insertions(+), 2 deletions(-)
>>  create mode 100644 arch/powerpc/platforms/512x/mpc5121_ads.h
>>  create mode 100644 arch/powerpc/platforms/512x/mpc5121_ads_cpld.c
>>
>> diff --git a/arch/powerpc/platforms/512x/Kconfig b/arch/powerpc/platforms/512x/Kconfig
>> index f9a04da..0fd3b00 100644
>> --- a/arch/powerpc/platforms/512x/Kconfig
>> +++ b/arch/powerpc/platforms/512x/Kconfig
>> @@ -12,6 +12,7 @@ config MPC5121_ADS
>>       depends on PPC_MULTIPLATFORM && PPC32
>>       select DEFAULT_UIMAGE
>>       select PPC_MPC5121
>> +     select MPC5121_ADS_CPLD
>
> What is this for?  I don't see it used anywhere.
Yes you are right, the Makefile just uses MPC5121_ADS to include the cpld code.
>
>>       help
>>         This option enables support for the MPC5121E ADS board.
>>
>> diff --git a/arch/powerpc/platforms/512x/mpc5121_ads.c b/arch/powerpc/platforms/512x/mpc5121_ads.c
>> index 45bb2ef..36805fd 100644
>> --- a/arch/powerpc/platforms/512x/mpc5121_ads.c
>> +++ b/arch/powerpc/platforms/512x/mpc5121_ads.c
>> @@ -1,5 +1,5 @@
>>  /*
>> - * Copyright (C) 2007 Freescale Semiconductor, Inc. All rights reserved.
>> + * Copyright (C) 2007, 2008 Freescale Semiconductor, Inc. All rights reserved.
>>   *
>>   * Author: John Rigby, <jrigby@freescale.com>, Thur Mar 29 2007
>>   *
>> @@ -23,6 +23,16 @@
>>  #include <asm/time.h>
>>
>>  #include "mpc512x.h"
>> +#include "mpc5121_ads.h"
>> +
>> +static void __init mpc5121_ads_setup_arch(void)
>> +{
>> +     printk(KERN_INFO "MPC5121 ADS board from Freescale Semiconductor\n");
>> +     /*
>> +      * cpld regs are needed early
>> +      */
>> +     mpc5121_ads_cpld_map();
>> +}
>>
>>  static struct of_device_id __initdata of_bus_ids[] = {
>>       { .name = "soc", },
>> @@ -41,6 +51,7 @@ static void __init mpc5121_ads_declare_of_platform_devices(void)
>>  static void __init mpc5121_ads_init_IRQ(void)
>>  {
>>       mpc512x_init_IRQ();
>> +     mpc5121_ads_cpld_pic_init();
>
> Ah, I understand now.  Ignore my related comment in the previous patch.
>
>>  }
>>
>>  /*
> _______________________________________________
> Linuxppc-dev mailing list
> Linuxppc-dev@ozlabs.org
> https://ozlabs.org/mailman/listinfo/linuxppc-dev
>