From: Benjamin Herrenschmidt <benh@kernel.crashing.org>
To: Stefan Roese <sr@denx.de>
Cc: linuxppc-dev@ozlabs.org
Subject: Re: [PATCH] powerpc: Fix problems with 32bit PPC's running with more than 2GB of RAM
Date: Thu, 10 Jul 2008 06:02:38 +1000 [thread overview]
Message-ID: <1215633758.8970.372.camel@pasglop> (raw)
In-Reply-To: <1215611076-13518-1-git-send-email-sr@denx.de>
On Wed, 2008-07-09 at 15:44 +0200, Stefan Roese wrote:
> This patch enables 32bit PPC's (with 36bit physical address space, e.g.
> IBM/AMCC PPC44x) to run with more than 2GB of RAM. Mostly its just
> replacing types (unsigned long -> phys_addr_t).
>
> Tested on an AMCC Katmai with 4GB of DDR2.
>
> Signed-off-by: Stefan Roese <sr@denx.de>
But DMAs will break no ?
Ben.
> ---
> arch/powerpc/mm/init_32.c | 4 ++--
> arch/powerpc/mm/mem.c | 8 ++++----
> arch/powerpc/mm/mmu_decl.h | 4 ++--
> 3 files changed, 8 insertions(+), 8 deletions(-)
>
> diff --git a/arch/powerpc/mm/init_32.c b/arch/powerpc/mm/init_32.c
> index 1952b4d..325ccdd 100644
> --- a/arch/powerpc/mm/init_32.c
> +++ b/arch/powerpc/mm/init_32.c
> @@ -56,8 +56,8 @@
>
> DEFINE_PER_CPU(struct mmu_gather, mmu_gathers);
>
> -unsigned long total_memory;
> -unsigned long total_lowmem;
> +phys_addr_t total_memory;
> +phys_addr_t total_lowmem;
>
> phys_addr_t memstart_addr = (phys_addr_t)~0ull;
> EXPORT_SYMBOL(memstart_addr);
> diff --git a/arch/powerpc/mm/mem.c b/arch/powerpc/mm/mem.c
> index 51f82d8..55ef772 100644
> --- a/arch/powerpc/mm/mem.c
> +++ b/arch/powerpc/mm/mem.c
> @@ -329,7 +329,7 @@ static int __init mark_nonram_nosave(void)
> void __init paging_init(void)
> {
> unsigned long total_ram = lmb_phys_mem_size();
> - unsigned long top_of_ram = lmb_end_of_DRAM();
> + phys_addr_t top_of_ram = lmb_end_of_DRAM();
> unsigned long max_zone_pfns[MAX_NR_ZONES];
>
> #ifdef CONFIG_PPC32
> @@ -348,10 +348,10 @@ void __init paging_init(void)
> kmap_prot = PAGE_KERNEL;
> #endif /* CONFIG_HIGHMEM */
>
> - printk(KERN_DEBUG "Top of RAM: 0x%lx, Total RAM: 0x%lx\n",
> - top_of_ram, total_ram);
> + printk(KERN_DEBUG "Top of RAM: 0x%llx, Total RAM: 0x%lx\n",
> + (u64)top_of_ram, total_ram);
> printk(KERN_DEBUG "Memory hole size: %ldMB\n",
> - (top_of_ram - total_ram) >> 20);
> + (long int)((top_of_ram - total_ram) >> 20));
> memset(max_zone_pfns, 0, sizeof(max_zone_pfns));
> #ifdef CONFIG_HIGHMEM
> max_zone_pfns[ZONE_DMA] = lowmem_end_addr >> PAGE_SHIFT;
> diff --git a/arch/powerpc/mm/mmu_decl.h b/arch/powerpc/mm/mmu_decl.h
> index 0480225..4e46c63 100644
> --- a/arch/powerpc/mm/mmu_decl.h
> +++ b/arch/powerpc/mm/mmu_decl.h
> @@ -49,8 +49,8 @@ extern unsigned int num_tlbcam_entries;
> extern unsigned long ioremap_bot;
> extern unsigned long __max_low_memory;
> extern phys_addr_t __initial_memory_limit_addr;
> -extern unsigned long total_memory;
> -extern unsigned long total_lowmem;
> +extern phys_addr_t total_memory;
> +extern phys_addr_t total_lowmem;
> extern phys_addr_t memstart_addr;
> extern phys_addr_t lowmem_end_addr;
>
next prev parent reply other threads:[~2008-07-09 20:24 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-07-09 13:44 [PATCH] powerpc: Fix problems with 32bit PPC's running with more than 2GB of RAM Stefan Roese
2008-07-09 14:20 ` Kumar Gala
2008-07-09 15:05 ` Stefan Roese
2008-07-09 20:02 ` Benjamin Herrenschmidt [this message]
2008-07-09 20:22 ` Josh Boyer
2008-07-09 20:39 ` Benjamin Herrenschmidt
2008-07-10 0:44 ` Josh Boyer
2008-07-10 15:31 ` Becky Bruce
2008-07-12 3:33 ` Benjamin Herrenschmidt
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1215633758.8970.372.camel@pasglop \
--to=benh@kernel.crashing.org \
--cc=linuxppc-dev@ozlabs.org \
--cc=sr@denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).