From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from mail.wrs.com (mail.windriver.com [147.11.1.11]) by ozlabs.org (Postfix) with ESMTP id 075AADE048 for ; Fri, 11 Jul 2008 06:15:03 +1000 (EST) From: Paul Gortmaker To: linuxppc-dev@ozlabs.org Subject: [PATCH] mpc7448: add alias list to DTS, clean out old chosen node Date: Thu, 10 Jul 2008 16:21:35 -0400 Message-Id: <1215721295-17555-1-git-send-email-paul.gortmaker@windriver.com> Cc: Paul Gortmaker List-Id: Linux on PowerPC Developers Mail List List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , The mpc7448hpc2 board doesn't have an alias block like most of the other modern eval boards have. We need this block in order to have u-boot be able to make use of the CONFIG_OF_STDOUT_VIA_ALIAS (vs. having a hard coded node) in the future. Also remove the old, redundant chosen node. Of all the modern Freescale eval boards (incl. 83xx, 85xx, 86xx) this is the only one which still has it. Its presence also breaks with some older versions of u-boot, like 1.3.1 -- which try and insert a second chosen node. Signed-off-by: Paul Gortmaker --- arch/powerpc/boot/dts/mpc7448hpc2.dts | 24 +++++++++++++++--------- 1 files changed, 15 insertions(+), 9 deletions(-) diff --git a/arch/powerpc/boot/dts/mpc7448hpc2.dts b/arch/powerpc/boot/dts/mpc7448hpc2.dts index 705c23c..2544f3e 100644 --- a/arch/powerpc/boot/dts/mpc7448hpc2.dts +++ b/arch/powerpc/boot/dts/mpc7448hpc2.dts @@ -18,6 +18,16 @@ #address-cells = <1>; #size-cells = <1>; + aliases { + ethernet0 = &enet0; + ethernet1 = &enet1; + + serial0 = &serial0; + serial1 = &serial1; + + pci0 = &pci0; + }; + cpus { #address-cells = <1>; #size-cells =<0>; @@ -78,7 +88,7 @@ }; - ethernet@6200 { + enet0: ethernet@6200 { linux,network-index = <0>; #size-cells = <0>; device_type = "network"; @@ -91,7 +101,7 @@ phy-handle = <&phy8>; }; - ethernet@6600 { + enet1: ethernet@6600 { linux,network-index = <1>; #address-cells = <1>; #size-cells = <0>; @@ -105,7 +115,7 @@ phy-handle = <&phy9>; }; - serial@7808 { + serial0: serial@7808 { device_type = "serial"; compatible = "ns16550"; reg = <0x7808 0x200>; @@ -114,7 +124,7 @@ interrupt-parent = <&mpic>; }; - serial@7c08 { + serial1: serial@7c08 { device_type = "serial"; compatible = "ns16550"; reg = <0x7c08 0x200>; @@ -131,7 +141,7 @@ compatible = "chrp,open-pic"; device_type = "open-pic"; }; - pci@1000 { + pci0: pci@1000 { compatible = "tsi108-pci"; device_type = "pci"; #interrupt-cells = <1>; @@ -184,8 +194,4 @@ }; }; }; - chosen { - linux,stdout-path = "/tsi108@c0000000/serial@7808"; - }; - }; -- 1.5.6.2