From: Benjamin Herrenschmidt <benh@kernel.crashing.org>
To: Sebastien Dugue <sebastien.dugue@bull.net>
Cc: tinytim@us.ibm.com, linux-rt-users@vger.kernel.org,
linux-kernel@vger.kernel.org, rostedt@goodmis.org,
jean-pierre.dion@bull.net, linuxppc-dev@ozlabs.org,
paulus@samba.org, gilles.carry@ext.bull.net, tglx@linutronix.de
Subject: Re: [PATCH 1/3] powerpc - Initialize the irq radix tree earlier
Date: Tue, 05 Aug 2008 11:03:46 +1000 [thread overview]
Message-ID: <1217898226.24157.120.camel@pasglop> (raw)
In-Reply-To: <1217848124-3719-2-git-send-email-sebastien.dugue@bull.net>
On Mon, 2008-08-04 at 13:08 +0200, Sebastien Dugue wrote:
> The radix tree used for fast irq reverse mapping by the XICS is initialized
> late in the boot process, after the first interrupt (IPI) gets registered
> and after the first IPI is received.
>
> This patch moves the initialization of the XICS radix tree earlier into
> the boot process in smp_xics_probe() (the mm is already up but no interrupts
> have been registered at that point) to avoid having to insert a mapping into
> the tree in interrupt context. This will help in simplifying the locking
> constraints and move to a lockless radix tree in subsequent patches.
I'm not too happy with the moving of the radix tree init to platform
code.
The fact that the revmap code uses a radix tree should be mostly
transparent to the XICS code. I don't like adding this explicit code
from xics to initialize it.
I think the tree should still be initialized from generic code and it
can be done as late as we want as interrupts work without the tree being
there, they are just a bit slower.
I believe the right approach is:
- Remove the populating of the tree from the revmap function as
you already do
- Move it to irq_create_mapping() for the normal case
- For pre-existing interrupt, have the generic code that initializes
the radix tree walk through all interrupts and setup the revmap for
them. If that needs locking vs. concurrent irq_create_mapping, it's
easy to use one of the available spinlocks for that.
Cheers,
Ben.
> Signed-off-by: Sebastien Dugue <sebastien.dugue@bull.net>
> Cc: Paul Mackerras <paulus@samba.org>
> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
> Cc: Michael Ellerman <michael@ellerman.id.au>
> ---
> arch/powerpc/kernel/irq.c | 17 -----------------
> arch/powerpc/platforms/pseries/smp.c | 1 +
> arch/powerpc/platforms/pseries/xics.c | 5 +++++
> arch/powerpc/platforms/pseries/xics.h | 1 +
> 4 files changed, 7 insertions(+), 17 deletions(-)
>
> diff --git a/arch/powerpc/kernel/irq.c b/arch/powerpc/kernel/irq.c
> index d972dec..9bef9f3 100644
> --- a/arch/powerpc/kernel/irq.c
> +++ b/arch/powerpc/kernel/irq.c
> @@ -1016,23 +1016,6 @@ void irq_early_init(void)
> get_irq_desc(i)->status |= IRQ_NOREQUEST;
> }
>
> -/* We need to create the radix trees late */
> -static int irq_late_init(void)
> -{
> - struct irq_host *h;
> - unsigned long flags;
> -
> - irq_radix_wrlock(&flags);
> - list_for_each_entry(h, &irq_hosts, link) {
> - if (h->revmap_type == IRQ_HOST_MAP_TREE)
> - INIT_RADIX_TREE(&h->revmap_data.tree, GFP_ATOMIC);
> - }
> - irq_radix_wrunlock(flags);
> -
> - return 0;
> -}
> -arch_initcall(irq_late_init);
> -
> #ifdef CONFIG_VIRQ_DEBUG
> static int virq_debug_show(struct seq_file *m, void *private)
> {
> diff --git a/arch/powerpc/platforms/pseries/smp.c b/arch/powerpc/platforms/pseries/smp.c
> index 9d8f8c8..3d4429a 100644
> --- a/arch/powerpc/platforms/pseries/smp.c
> +++ b/arch/powerpc/platforms/pseries/smp.c
> @@ -130,6 +130,7 @@ static void smp_xics_message_pass(int target, int msg)
>
> static int __init smp_xics_probe(void)
> {
> + xics_radix_revmap_init();
> xics_request_IPIs();
>
> return cpus_weight(cpu_possible_map);
> diff --git a/arch/powerpc/platforms/pseries/xics.c b/arch/powerpc/platforms/pseries/xics.c
> index 0fc830f..d6e28f9 100644
> --- a/arch/powerpc/platforms/pseries/xics.c
> +++ b/arch/powerpc/platforms/pseries/xics.c
> @@ -556,6 +556,11 @@ static struct irq_host_ops xics_host_ops = {
> .xlate = xics_host_xlate,
> };
>
> +void __init xics_radix_revmap_init(void)
> +{
> + INIT_RADIX_TREE(&xics_host->revmap_data.tree, GFP_ATOMIC);
> +}
> +
> static void __init xics_init_host(void)
> {
> if (firmware_has_feature(FW_FEATURE_LPAR))
> diff --git a/arch/powerpc/platforms/pseries/xics.h b/arch/powerpc/platforms/pseries/xics.h
> index 1c5321a..11490be 100644
> --- a/arch/powerpc/platforms/pseries/xics.h
> +++ b/arch/powerpc/platforms/pseries/xics.h
> @@ -19,6 +19,7 @@ extern void xics_setup_cpu(void);
> extern void xics_teardown_cpu(void);
> extern void xics_kexec_teardown_cpu(int secondary);
> extern void xics_cause_IPI(int cpu);
> +extern void xics_radix_revmap_init(void);
> extern void xics_request_IPIs(void);
> extern void xics_migrate_irqs_away(void);
>
next prev parent reply other threads:[~2008-08-05 1:04 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-08-04 11:08 [PATCH 0/3 V2] powerpc - Make the irq reverse mapping tree lockless Sebastien Dugue
2008-08-04 11:08 ` [PATCH 1/3] powerpc - Initialize the irq radix tree earlier Sebastien Dugue
2008-08-05 1:03 ` Benjamin Herrenschmidt [this message]
2008-08-05 1:05 ` Benjamin Herrenschmidt
2008-08-05 8:27 ` Sebastien Dugue
2008-08-05 8:26 ` Sebastien Dugue
2008-08-04 11:08 ` [PATCH 2/3] powerpc - Separate the irq radix tree insertion and lookup Sebastien Dugue
2008-08-04 11:08 ` [PATCH 3/3] powerpc - Make the irq reverse mapping radix tree lockless Sebastien Dugue
2008-08-04 16:31 ` Daniel Walker
2008-08-05 8:28 ` Sebastien Dugue
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1217898226.24157.120.camel@pasglop \
--to=benh@kernel.crashing.org \
--cc=gilles.carry@ext.bull.net \
--cc=jean-pierre.dion@bull.net \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-rt-users@vger.kernel.org \
--cc=linuxppc-dev@ozlabs.org \
--cc=paulus@samba.org \
--cc=rostedt@goodmis.org \
--cc=sebastien.dugue@bull.net \
--cc=tglx@linutronix.de \
--cc=tinytim@us.ibm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).