[PATCH 1/6] powerpc: update flash size and partition in mpc8272ads dts

[Li Yang <leoli@freescale.com>]

Make the flash size 8M to be consistent with the module comes with board.
Add predefined partitions for the flash.  Add ethernet port aliases.

Signed-off-by: Li Yang <leoli@freescale.com>
---
 arch/powerpc/boot/dts/mpc8272ads.dts |   38 +++++++++++++++++++++++++++++----
 1 files changed, 33 insertions(+), 5 deletions(-)

diff --git a/arch/powerpc/boot/dts/mpc8272ads.dts b/arch/powerpc/boot/dts/mpc8272ads.dts
index 2a1929a..b2ce4c0 100644
--- a/arch/powerpc/boot/dts/mpc8272ads.dts
+++ b/arch/powerpc/boot/dts/mpc8272ads.dts
@@ -17,6 +17,11 @@
 	#address-cells = <1>;
 	#size-cells = <1>;
 
+	aliases {
+		ethernet0 = &enet0;
+		ethernet1 = &enet1;
+	};
+
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -46,15 +51,38 @@
 		#size-cells = <1>;
 		reg = <0xf0010100 0x40>;
 
-		ranges = <0x0 0x0 0xfe000000 0x2000000
+		ranges = <0x0 0x0 0xff800000 0x800000
 		          0x1 0x0 0xf4500000 0x8000
 		          0x3 0x0 0xf8200000 0x8000>;
 
 		flash@0,0 {
-			compatible = "jedec-flash";
-			reg = <0x0 0x0 0x2000000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "cfi-flash";
+			probe-type = "CFI";
+			reg = <0x0 0x0 0x800000>;
 			bank-width = <4>;
 			device-width = <1>;
+			hrcw@0 {
+				label = "hrcw";
+				reg = <0x0 0x40000>;
+			};
+			fs@40000 {
+				label = "fs";
+				reg = <0x40000 0x540000>;
+			};
+			kernel@580000 {
+				label = "kernel";
+				reg = <0x580000 0x180000>;
+			};
+			u-boot@700000 {
+				label = "u-boot";
+				reg = <0x700000 0x40000>;
+			};
+			u-boot-env@740000 {
+				label = "u-boot-env";
+				reg = <0x740000 0x40000>;
+			};
 		};
 
 		board-control@1,0 {
@@ -192,7 +220,7 @@
 				};
 			};
 
-			ethernet@11300 {
+			enet0: ethernet@11300 {
 				device_type = "network";
 				compatible = "fsl,mpc8272-fcc-enet",
 				             "fsl,cpm2-fcc-enet";
@@ -205,7 +233,7 @@
 				fsl,cpm-command = <0x12000300>;
 			};
 
-			ethernet@11320 {
+			enet1: ethernet@11320 {
 				device_type = "network";
 				compatible = "fsl,mpc8272-fcc-enet",
 				             "fsl,cpm2-fcc-enet";
-- 
1.5.5.1.248.g4b17