linuxppc-dev.lists.ozlabs.org archive mirror
 help / color / mirror / Atom feed
From: Kumar Gala <galak@kernel.crashing.org>
To: linuxppc-dev@ozlabs.org
Subject: [PATCH v3 4/4] powerpc/mm: Implement _PAGE_SPECIAL & pte_special() for 32-bit
Date: Wed,  3 Sep 2008 13:09:04 -0500	[thread overview]
Message-ID: <1220465344-16753-4-git-send-email-galak@kernel.crashing.org> (raw)
In-Reply-To: <1220465344-16753-3-git-send-email-galak@kernel.crashing.org>

Implement _PAGE_SPECIAL and pte_special() for 32-bit powerpc. This bit will
be used by the fast get_user_pages() to differenciate PTEs that correspond
to a valid struct page from special mappings that don't such as IO mappings
obtained via io_remap_pfn_ranges().

We currently only implement this on sub-arch that support SMP or will so
in the future (6xx, 44x, FSL-BookE) and not (8xx, 40x).

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
---
 arch/powerpc/include/asm/pgtable-ppc32.h |   15 +++++++++++++--
 1 files changed, 13 insertions(+), 2 deletions(-)

diff --git a/arch/powerpc/include/asm/pgtable-ppc32.h b/arch/powerpc/include/asm/pgtable-ppc32.h
index dff1b7e..9fc6250 100644
--- a/arch/powerpc/include/asm/pgtable-ppc32.h
+++ b/arch/powerpc/include/asm/pgtable-ppc32.h
@@ -261,6 +261,7 @@ extern int icache_44x_need_flush;
 #define _PAGE_HWEXEC	0x00000004		/* H: Execute permission */
 #define _PAGE_ACCESSED	0x00000008		/* S: Page referenced */
 #define _PAGE_DIRTY	0x00000010		/* S: Page dirty */
+#define _PAGE_SPECIAL	0x00000020		/* S: Special page */
 #define _PAGE_USER	0x00000040		/* S: User page */
 #define _PAGE_ENDIAN	0x00000080		/* H: E bit */
 #define _PAGE_GUARDED	0x00000100		/* H: G bit */
@@ -276,6 +277,7 @@ extern int icache_44x_need_flush;
 /* ERPN in a PTE never gets cleared, ignore it */
 #define _PTE_NONE_MASK	0xffffffff00000000ULL
 
+#define __HAVE_ARCH_PTE_SPECIAL
 
 #elif defined(CONFIG_FSL_BOOKE)
 /*
@@ -305,6 +307,7 @@ extern int icache_44x_need_flush;
 #define _PAGE_COHERENT	0x00100	/* H: M bit */
 #define _PAGE_NO_CACHE	0x00200	/* H: I bit */
 #define _PAGE_WRITETHRU	0x00400	/* H: W bit */
+#define _PAGE_SPECIAL	0x00800 /* S: Special page */
 
 #ifdef CONFIG_PTE_64BIT
 /* ERPN in a PTE never gets cleared, ignore it */
@@ -315,6 +318,8 @@ extern int icache_44x_need_flush;
 #define _PMD_PRESENT_MASK (PAGE_MASK)
 #define _PMD_BAD	(~PAGE_MASK)
 
+#define __HAVE_ARCH_PTE_SPECIAL
+
 #elif defined(CONFIG_8xx)
 /* Definitions for 8xx embedded chips. */
 #define _PAGE_PRESENT	0x0001	/* Page is valid */
@@ -362,6 +367,7 @@ extern int icache_44x_need_flush;
 #define _PAGE_ACCESSED	0x100	/* R: page referenced */
 #define _PAGE_EXEC	0x200	/* software: i-cache coherency required */
 #define _PAGE_RW	0x400	/* software: user write access allowed */
+#define _PAGE_SPECIAL	0x800	/* software: Special page */
 
 #define _PTE_NONE_MASK	_PAGE_HASHPTE
 
@@ -372,6 +378,8 @@ extern int icache_44x_need_flush;
 /* Hash table based platforms need atomic updates of the linux PTE */
 #define PTE_ATOMIC_UPDATES	1
 
+#define __HAVE_ARCH_PTE_SPECIAL
+
 #endif
 
 /*
@@ -404,6 +412,9 @@ extern int icache_44x_need_flush;
 #ifndef _PAGE_WRITETHRU
 #define _PAGE_WRITETHRU	0
 #endif
+#ifndef _PAGE_SPECIAL
+#define _PAGE_SPECIAL	0
+#endif
 #ifndef _PMD_PRESENT_MASK
 #define _PMD_PRESENT_MASK	_PMD_PRESENT
 #endif
@@ -534,7 +545,7 @@ static inline int pte_write(pte_t pte)		{ return pte_val(pte) & _PAGE_RW; }
 static inline int pte_dirty(pte_t pte)		{ return pte_val(pte) & _PAGE_DIRTY; }
 static inline int pte_young(pte_t pte)		{ return pte_val(pte) & _PAGE_ACCESSED; }
 static inline int pte_file(pte_t pte)		{ return pte_val(pte) & _PAGE_FILE; }
-static inline int pte_special(pte_t pte)	{ return 0; }
+static inline int pte_special(pte_t pte)	{ return pte_val(pte) & _PAGE_SPECIAL; }
 
 static inline void pte_uncache(pte_t pte)       { pte_val(pte) |= _PAGE_NO_CACHE; }
 static inline void pte_cache(pte_t pte)         { pte_val(pte) &= ~_PAGE_NO_CACHE; }
@@ -553,7 +564,7 @@ static inline pte_t pte_mkdirty(pte_t pte) {
 static inline pte_t pte_mkyoung(pte_t pte) {
 	pte_val(pte) |= _PAGE_ACCESSED; return pte; }
 static inline pte_t pte_mkspecial(pte_t pte) {
-	return pte; }
+	pte_val(pte) |= _PAGE_SPECIAL; return pte; }
 static inline unsigned long pte_pgprot(pte_t pte)
 {
 	return __pgprot(pte_val(pte)) & PAGE_PROT_BITS;
-- 
1.5.5.1

  reply	other threads:[~2008-09-03 18:09 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2008-09-03 18:09 [PATCH v3 1/4] powerpc: Introduce local (non-broadcast) forms of tlb invalidates Kumar Gala
2008-09-03 18:09 ` [PATCH v3 2/4] powerpc: Fixes for CONFIG_PTE_64BIT for SMP support Kumar Gala
2008-09-03 18:09   ` [PATCH v3 3/4] powerpc/fsl-booke: Fixup 64-bit PTE reading " Kumar Gala
2008-09-03 18:09     ` Kumar Gala [this message]
2008-09-04  3:15       ` [PATCH v3 4/4] powerpc/mm: Implement _PAGE_SPECIAL & pte_special() for 32-bit Benjamin Herrenschmidt
2008-09-04  3:14     ` [PATCH v3 3/4] powerpc/fsl-booke: Fixup 64-bit PTE reading for SMP support Benjamin Herrenschmidt
2008-09-04  3:12   ` [PATCH v3 2/4] powerpc: Fixes for CONFIG_PTE_64BIT " Benjamin Herrenschmidt
2008-09-05 19:44     ` Kumar Gala
2008-09-05 22:38       ` Benjamin Herrenschmidt
2008-09-06 15:32         ` Kumar Gala
2008-09-04 19:17 ` [PATCH v3 1/4] powerpc: Introduce local (non-broadcast) forms of tlb invalidates Rafal Jaworowski
2008-09-04 21:30   ` Benjamin Herrenschmidt

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1220465344-16753-4-git-send-email-galak@kernel.crashing.org \
    --to=galak@kernel.crashing.org \
    --cc=linuxppc-dev@ozlabs.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).