linuxppc-dev.lists.ozlabs.org archive mirror
 help / color / mirror / Atom feed
From: Benjamin Herrenschmidt <benh@kernel.crashing.org>
To: Becky Bruce <becky.bruce@freescale.com>
Cc: linuxppc-dev@ozlabs.org
Subject: Re: [PATCH] POWERPC: Rename PTE_SIZE to HPTE_SIZE
Date: Fri, 05 Sep 2008 08:38:37 +1000	[thread overview]
Message-ID: <1220567917.4879.87.camel@pasglop> (raw)
In-Reply-To: <1220456273-6453-1-git-send-email-becky.bruce@freescale.com>

On Wed, 2008-09-03 at 10:37 -0500, Becky Bruce wrote:
> It's the size of the hardware PTE; make that clear in the name.
> 
> Signed-off-by: Becky Bruce <becky.bruce@freescale.com>

Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
> ---
>  arch/powerpc/mm/hash_low_32.S |   36 ++++++++++++++++++------------------
>  1 files changed, 18 insertions(+), 18 deletions(-)
> 
> diff --git a/arch/powerpc/mm/hash_low_32.S b/arch/powerpc/mm/hash_low_32.S
> index b9ba7d9..c41d658 100644
> --- a/arch/powerpc/mm/hash_low_32.S
> +++ b/arch/powerpc/mm/hash_low_32.S
> @@ -285,7 +285,7 @@ Hash_bits = 12				/* e.g. 256kB hash table */
>  Hash_msk = (((1 << Hash_bits) - 1) * 64)
>  
>  /* defines for the PTE format for 32-bit PPCs */
> -#define PTE_SIZE	8
> +#define HPTE_SIZE	8
>  #define PTEG_SIZE	64
>  #define LG_PTEG_SIZE	6
>  #define LDPTEu		lwzu
> @@ -342,8 +342,8 @@ _GLOBAL(hash_page_patch_A)
>  
>  	/* Search the primary PTEG for a PTE whose 1st (d)word matches r5 */
>  	mtctr	r0
> -	addi	r4,r3,-PTE_SIZE
> -1:	LDPTEu	r6,PTE_SIZE(r4)		/* get next PTE */
> +	addi	r4,r3,-HPTE_SIZE
> +1:	LDPTEu	r6,HPTE_SIZE(r4)	/* get next PTE */
>  	CMPPTE	0,r6,r5
>  	bdnzf	2,1b			/* loop while ctr != 0 && !cr0.eq */
>  	beq+	found_slot
> @@ -353,9 +353,9 @@ _GLOBAL(hash_page_patch_A)
>  _GLOBAL(hash_page_patch_B)
>  	xoris	r4,r3,Hash_msk>>16	/* compute secondary hash */
>  	xori	r4,r4,(-PTEG_SIZE & 0xffff)
> -	addi	r4,r4,-PTE_SIZE
> +	addi	r4,r4,-HPTE_SIZE
>  	mtctr	r0
> -2:	LDPTEu	r6,PTE_SIZE(r4)
> +2:	LDPTEu	r6,HPTE_SIZE(r4)
>  	CMPPTE	0,r6,r5
>  	bdnzf	2,2b
>  	beq+	found_slot
> @@ -363,8 +363,8 @@ _GLOBAL(hash_page_patch_B)
>  
>  	/* Search the primary PTEG for an empty slot */
>  10:	mtctr	r0
> -	addi	r4,r3,-PTE_SIZE		/* search primary PTEG */
> -1:	LDPTEu	r6,PTE_SIZE(r4)		/* get next PTE */
> +	addi	r4,r3,-HPTE_SIZE	/* search primary PTEG */
> +1:	LDPTEu	r6,HPTE_SIZE(r4)	/* get next PTE */
>  	TST_V(r6)			/* test valid bit */
>  	bdnzf	2,1b			/* loop while ctr != 0 && !cr0.eq */
>  	beq+	found_empty
> @@ -380,9 +380,9 @@ _GLOBAL(hash_page_patch_B)
>  _GLOBAL(hash_page_patch_C)
>  	xoris	r4,r3,Hash_msk>>16	/* compute secondary hash */
>  	xori	r4,r4,(-PTEG_SIZE & 0xffff)
> -	addi	r4,r4,-PTE_SIZE
> +	addi	r4,r4,-HPTE_SIZE
>  	mtctr	r0
> -2:	LDPTEu	r6,PTE_SIZE(r4)
> +2:	LDPTEu	r6,HPTE_SIZE(r4)
>  	TST_V(r6)
>  	bdnzf	2,2b
>  	beq+	found_empty
> @@ -409,11 +409,11 @@ _GLOBAL(hash_page_patch_C)
>  
>  1:	addis	r4,r7,next_slot@ha		/* get next evict slot */
>  	lwz	r6,next_slot@l(r4)
> -	addi	r6,r6,PTE_SIZE			/* search for candidate */
> -	andi.	r6,r6,7*PTE_SIZE
> +	addi	r6,r6,HPTE_SIZE			/* search for candidate */
> +	andi.	r6,r6,7*HPTE_SIZE
>  	stw	r6,next_slot@l(r4)
>  	add	r4,r3,r6
> -	LDPTE	r0,PTE_SIZE/2(r4)		/* get PTE second word */
> +	LDPTE	r0,HPTE_SIZE/2(r4)		/* get PTE second word */
>  	clrrwi	r0,r0,12
>  	lis	r6,etext@h
>  	ori	r6,r6,etext@l			/* get etext */
> @@ -426,7 +426,7 @@ _GLOBAL(hash_page_patch_C)
>  found_empty:
>  	STPTE	r5,0(r4)
>  found_slot:
> -	STPTE	r8,PTE_SIZE/2(r4)
> +	STPTE	r8,HPTE_SIZE/2(r4)
>  
>  #else /* CONFIG_SMP */
>  /*
> @@ -452,7 +452,7 @@ found_slot:
>  	STPTE	r5,0(r4)
>  	sync
>  	TLBSYNC
> -	STPTE	r8,PTE_SIZE/2(r4) /* put in correct RPN, WIMG, PP bits */
> +	STPTE	r8,HPTE_SIZE/2(r4) /* put in correct RPN, WIMG, PP bits */
>  	sync
>  	SET_V(r5)
>  	STPTE	r5,0(r4)	/* finally set V bit in PTE */
> @@ -562,8 +562,8 @@ _GLOBAL(flush_hash_patch_A)
>  	/* Search the primary PTEG for a PTE whose 1st (d)word matches r5 */
>  	li	r0,8			/* PTEs/group */
>  	mtctr	r0
> -	addi	r12,r8,-PTE_SIZE
> -1:	LDPTEu	r0,PTE_SIZE(r12)	/* get next PTE */
> +	addi	r12,r8,-HPTE_SIZE
> +1:	LDPTEu	r0,HPTE_SIZE(r12)	/* get next PTE */
>  	CMPPTE	0,r0,r11
>  	bdnzf	2,1b			/* loop while ctr != 0 && !cr0.eq */
>  	beq+	3f
> @@ -574,9 +574,9 @@ _GLOBAL(flush_hash_patch_A)
>  _GLOBAL(flush_hash_patch_B)
>  	xoris	r12,r8,Hash_msk>>16	/* compute secondary hash */
>  	xori	r12,r12,(-PTEG_SIZE & 0xffff)
> -	addi	r12,r12,-PTE_SIZE
> +	addi	r12,r12,-HPTE_SIZE
>  	mtctr	r0
> -2:	LDPTEu	r0,PTE_SIZE(r12)
> +2:	LDPTEu	r0,HPTE_SIZE(r12)
>  	CMPPTE	0,r0,r11
>  	bdnzf	2,2b
>  	xori	r11,r11,PTE_H		/* clear H again */

      reply	other threads:[~2008-09-04 22:38 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2008-09-03 15:37 [PATCH] POWERPC: Rename PTE_SIZE to HPTE_SIZE Becky Bruce
2008-09-04 22:38 ` Benjamin Herrenschmidt [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1220567917.4879.87.camel@pasglop \
    --to=benh@kernel.crashing.org \
    --cc=becky.bruce@freescale.com \
    --cc=linuxppc-dev@ozlabs.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).