From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from de01egw02.freescale.net (de01egw02.freescale.net [192.88.165.103]) (using TLSv1 with cipher DHE-RSA-AES256-SHA (256/256 bits)) (Client CN "de01egw02.freescale.net", Issuer "Thawte Premium Server CA" (verified OK)) by ozlabs.org (Postfix) with ESMTPS id 652C6DDF11 for ; Fri, 3 Oct 2008 09:52:03 +1000 (EST) From: Timur Tabi To: galak@kernel.crashing.org, linuxppc-dev@ozlabs.org Subject: [PATCH] powerpc: make Freescale QE support a selectable Kconfig option Date: Thu, 2 Oct 2008 10:27:57 -0500 Message-Id: <1222961277-6166-1-git-send-email-timur@freescale.com> List-Id: Linux on PowerPC Developers Mail List List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Modify the Kconfig so that Freescale QUICC Engine (QE) support is a selectable option, thereby allowing users to compile kernels without any QE support. The drawback is that QE support is now disabled by default on platforms that have a QE, and so a defconfig is needed to enable QE and QE devices (like UCC GETH). Fortunately, all the current relevant defconfigs do that already. Signed-off-by: Timur Tabi --- This patch should be applied to Kumar's branch for 2.6.28 patches. arch/powerpc/platforms/83xx/Kconfig | 4 ---- arch/powerpc/platforms/Kconfig | 3 ++- 2 files changed, 2 insertions(+), 5 deletions(-) diff --git a/arch/powerpc/platforms/83xx/Kconfig b/arch/powerpc/platforms/83xx/Kconfig index 6159c5d..4a6cc78 100644 --- a/arch/powerpc/platforms/83xx/Kconfig +++ b/arch/powerpc/platforms/83xx/Kconfig @@ -19,7 +19,6 @@ config MPC831x_RDB config MPC832x_MDS bool "Freescale MPC832x MDS" select DEFAULT_UIMAGE - select QUICC_ENGINE select PPC_MPC832x help This option enables support for the MPC832x MDS evaluation board. @@ -27,7 +26,6 @@ config MPC832x_MDS config MPC832x_RDB bool "Freescale MPC832x RDB" select DEFAULT_UIMAGE - select QUICC_ENGINE select PPC_MPC832x help This option enables support for the MPC8323 RDB board. @@ -57,14 +55,12 @@ config MPC834x_ITX config MPC836x_MDS bool "Freescale MPC836x MDS" select DEFAULT_UIMAGE - select QUICC_ENGINE help This option enables support for the MPC836x MDS Processor Board. config MPC836x_RDK bool "Freescale/Logic MPC836x RDK" select DEFAULT_UIMAGE - select QUICC_ENGINE select QE_GPIO select FSL_GTM select FSL_LBC diff --git a/arch/powerpc/platforms/Kconfig b/arch/powerpc/platforms/Kconfig index 9578c45..6cf517f 100644 --- a/arch/powerpc/platforms/Kconfig +++ b/arch/powerpc/platforms/Kconfig @@ -239,7 +239,8 @@ config TAU_AVERAGE If in doubt, say N here. config QUICC_ENGINE - bool + bool "Freescale QUICC Engine (QE) Support" + depends on FSL_SOC select PPC_LIB_RHEAP select CRC32 help -- 1.5.5