From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from mail.deltatau.com (smtp.deltatau.com [64.60.44.211]) by ozlabs.org (Postfix) with ESMTP id 8CB21DDE23 for ; Tue, 18 Nov 2008 11:54:49 +1100 (EST) Subject: AMCC 460EX SATA drive on Canyonlands From: Henry Bausley To: linuxppc-embedded@ozlabs.org In-Reply-To: <4921BA09.1030508@freescale.com> References: <4921A2EE.6050201@freescale.com> <4921BA09.1030508@freescale.com> Content-Type: text/plain Date: Mon, 17 Nov 2008 16:54:05 -0800 Message-Id: <1226969645.808.13.camel@lt-linuxhenry> Mime-Version: 1.0 List-Id: Linux on Embedded PowerPC Developers Mail List List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , I can't seem to see a SATA drive on my 460EX Canyonlands board. Did I miss something in the kernel configuration. The drive is a Seagate Baracuda 750M - ST3750330AS Below are the messages I get: sata-dwc sata-dwc.0: id 0, controller version 1.82 sata-dwc sata-dwc.0: DMA initialized sata-dwc sata-dwc.0: **** No negotiated speed (nothing attached?) **** scsi0 : sata-dwc ata1: SATA max UDMA/133 irq 21 4cc000000.nor_flash: Found 1 x16 devices at 0x0 in 16-bit bank Amd/Fujitsu Extended Query Table at 0x0040 4cc000000.nor_flash: CFI does not contain boot bank location. Assuming top. number of CFI chips: 1 cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness. RedBoot partition parsing not available Creating 7 MTD partitions on "4cc000000.nor_flash": 0x00000000-0x001e0000 : "kernel" 0x001e0000-0x00200000 : "dtb" 0x00200000-0x01600000 : "ramdisk" 0x01600000-0x01a00000 : "jffs2" 0x01a00000-0x03f60000 : "user" 0x03f60000-0x03fa0000 : "env" 0x03fa0000-0x04000000 : "u-boot" ppc-of-ehci 4bffd0400.ehci: OF EHCI ppc-of-ehci 4bffd0400.ehci: new USB bus registered, assigned bus number 1 ppc-of-ehci 4bffd0400.ehci: irq 33, io mem 0x4bffd0400 ppc-of-ehci 4bffd0400.ehci: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 1 port detected Initializing USB Mass Storage driver... usb 1-1: new high speed USB device using ppc-of-ehci and address 2 usb 1-1: configuration #1 chosen from 1 choice hub 1-1:1.0: USB hub found hub 1-1:1.0: 2 ports detected usb 1-1.1: new high speed USB device using ppc-of-ehci and address 3 usb 1-1.1: configuration #1 chosen from 1 choice scsi1 : SCSI emulation for USB Mass Storage devices usbcore: registered new interface driver usb-storage USB Mass Storage support registered.