From: Kumar Gala <galak@kernel.crashing.org>
Cc: linuxppc-dev@ozlabs.org, Becky Bruce <becky.bruce@freescale.com>
Subject: [PATCH v2 2/3] powerpc: setup default archdata for {of_}platform via bus_register_notifier
Date: Thu, 19 Mar 2009 08:40:51 -0500 [thread overview]
Message-ID: <1237470052-4071-2-git-send-email-galak@kernel.crashing.org> (raw)
In-Reply-To: <1237470052-4071-1-git-send-email-galak@kernel.crashing.org>
Since a number of powerpc chips are SoCs we end up having dma-able
devices that are registered as platform or of_platform devices. We need
to hook the archdata to setup proper dma_ops for these devices.
Rather than having to add a bus_notify to each platform we add a default
one at the highest priority (called first) to set the default dma_ops for
of_platform and platform devices to dma_direct_ops. This allows platform
code to override the ops by providing their own notifier call back.
In the future to enable >4G DMA support on ppc32 we can hook swiotlb ops.
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
---
* Use bus notifiers instead of platform_notify
arch/powerpc/kernel/setup-common.c | 36 +++++++++++++++++++++++++++++
arch/powerpc/platforms/cell/qpace_setup.c | 13 ----------
2 files changed, 36 insertions(+), 13 deletions(-)
diff --git a/arch/powerpc/kernel/setup-common.c b/arch/powerpc/kernel/setup-common.c
index 705fc4b..9774f9f 100644
--- a/arch/powerpc/kernel/setup-common.c
+++ b/arch/powerpc/kernel/setup-common.c
@@ -35,6 +35,8 @@
#include <linux/debugfs.h>
#include <linux/percpu.h>
#include <linux/lmb.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
#include <asm/io.h>
#include <asm/prom.h>
#include <asm/processor.h>
@@ -669,3 +671,37 @@ static int powerpc_debugfs_init(void)
}
arch_initcall(powerpc_debugfs_init);
#endif
+
+static int ppc_dflt_bus_notify(struct notifier_block *nb,
+ unsigned long action, void *data)
+{
+ struct device *dev = data;
+
+ /* We are only intereted in device addition */
+ if (action != BUS_NOTIFY_ADD_DEVICE)
+ return 0;
+
+ set_dma_ops(dev, &dma_direct_ops);
+
+ return NOTIFY_DONE;
+}
+
+static struct notifier_block ppc_dflt_plat_bus_notifier = {
+ .notifier_call = ppc_dflt_bus_notify,
+ .priority = INT_MAX,
+};
+
+static struct notifier_block ppc_dflt_of_bus_notifier = {
+ .notifier_call = ppc_dflt_bus_notify,
+ .priority = INT_MAX,
+};
+
+static int __init setup_bus_notifier(void)
+{
+ bus_register_notifier(&platform_bus_type, &ppc_dflt_plat_bus_notifier);
+ bus_register_notifier(&of_platform_bus_type, &ppc_dflt_of_bus_notifier);
+
+ return 0;
+}
+
+arch_initcall(setup_bus_notifier);
diff --git a/arch/powerpc/platforms/cell/qpace_setup.c b/arch/powerpc/platforms/cell/qpace_setup.c
index c75b662..c5ce02e 100644
--- a/arch/powerpc/platforms/cell/qpace_setup.c
+++ b/arch/powerpc/platforms/cell/qpace_setup.c
@@ -81,16 +81,6 @@ static int __init qpace_publish_devices(void)
}
machine_subsys_initcall(qpace, qpace_publish_devices);
-extern int qpace_notify(struct device *dev)
-{
- /* set dma_ops for of_platform bus */
- if (dev->bus && dev->bus->name
- && !strcmp(dev->bus->name, "of_platform"))
- set_dma_ops(dev, &dma_direct_ops);
-
- return 0;
-}
-
static void __init qpace_setup_arch(void)
{
#ifdef CONFIG_SPU_BASE
@@ -115,9 +105,6 @@ static void __init qpace_setup_arch(void)
#ifdef CONFIG_DUMMY_CONSOLE
conswitchp = &dummy_con;
#endif
-
- /* set notifier function */
- platform_notify = &qpace_notify;
}
static int __init qpace_probe(void)
--
1.5.6.6
next prev parent reply other threads:[~2009-03-19 13:41 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-03-19 13:40 [PATCH v2 1/3] powerpc/pci: Default to dma_direct_ops for pci dma_ops Kumar Gala
2009-03-19 13:40 ` Kumar Gala [this message]
2009-03-19 13:40 ` [PATCH v2 3/3] powerpc: expect all devices calling dma ops to have archdata set Kumar Gala
2009-03-20 7:38 ` Benjamin Krill
2009-03-20 7:37 ` [PATCH v2 2/3] powerpc: setup default archdata for {of_}platform via bus_register_notifier Benjamin Krill
2009-03-20 7:37 ` [PATCH v2 1/3] powerpc/pci: Default to dma_direct_ops for pci dma_ops Benjamin Krill
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1237470052-4071-2-git-send-email-galak@kernel.crashing.org \
--to=galak@kernel.crashing.org \
--cc=becky.bruce@freescale.com \
--cc=linuxppc-dev@ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).