[PATCH 0/5] rapidio: adding memory mapping IO support and misc fixes

[PATCH 0/5] rapidio: adding memory mapping IO support and misc fixes

[Li Yang]

The patch series add MMIO support to Linux rapidio and fix a few nits.
 The patches cross rapidio, netdev, powerpc sub-systems.  It will be
good for them to go through one tree.  Probably Andrew?  As the
previous rapidio patches are mostly merged by you.

- Leo

[PATCH] rapidio: add common mapping APIs for RapidIO memory access

[Li Yang]

Add the mapping functions used to support direct IO memory access of
rapidIO.

Signed-off-by: Zhang Wei <zw@zh-kernel.org>
Signed-off-by: Li Yang <leoli@freescale.com>
---
 drivers/rapidio/rio.c   |   95 +++++++++++++++++++++++++++++++++++++++++++++++
 include/linux/rio.h     |   25 ++++++++++++
 include/linux/rio_drv.h |   24 +++++++++---
 3 files changed, 138 insertions(+), 6 deletions(-)

diff --git a/drivers/rapidio/rio.c b/drivers/rapidio/rio.c
index 6395c78..224a076 100644
--- a/drivers/rapidio/rio.c
+++ b/drivers/rapidio/rio.c
@@ -2,6 +2,8 @@
  * RapidIO interconnect services
  * (RapidIO Interconnect Specification, http://www.rapidio.org)
  *
+ * Copyright (C) 2007-2009 Freescale Semiconductor, Inc.
+ *
  * Copyright 2005 MontaVista Software, Inc.
  * Matt Porter <mporter@kernel.crashing.org>
  *
@@ -24,11 +26,23 @@
 #include <linux/spinlock.h>
 #include <linux/slab.h>
 #include <linux/interrupt.h>
+#include <linux/dma-mapping.h>
+#include <linux/hardirq.h>
 
 #include "rio.h"
 
 static LIST_HEAD(rio_mports);
 
+static DEFINE_SPINLOCK(rio_config_lock);
+
+struct resource rio_resource = {
+	.name	= "RapidIO GSM",
+	.start	= 0,
+	.end	= -1,
+	.flags	= IORESOURCE_MEM,
+};
+EXPORT_SYMBOL(rio_resource);
+
 /**
  * rio_local_get_device_id - Get the base/extended device id for a port
  * @port: RIO master port from which to get the deviceid
@@ -333,6 +347,87 @@ int rio_release_outb_dbell(struct rio_dev *rdev, struct resource *res)
 }
 
 /**
+ * rio_map_inb_region -- Mapping inbound memory region.
+ * @mport: Master port.
+ * @mem: Memory struction for mapping.
+ * @rflags: Flags for mapping.
+ *
+ * Return: 0 -- Success.
+ *
+ * This function will create the mapping from rio space to local mem.
+ */
+int rio_map_inb_region(struct rio_mport *mport, struct resource *rio_res,
+			dma_addr_t local, u32 rflags)
+{
+	int rc = 0;
+	unsigned long flags;
+
+	if (!mport->mops)
+		return -1;
+	spin_lock_irqsave(&rio_config_lock, flags);
+	rc = mport->mops->map_inb(mport, local, rio_res->start,
+				resource_size(rio_res), rflags);
+	spin_unlock_irqrestore(&rio_config_lock, flags);
+	return rc;
+}
+
+/**
+ * rio_map_outb_region -- Mapping outbound memory region.
+ * @mport: Master port.
+ * @tid: Target RapidIO device id.
+ * @mem: Memory struction for mapping.
+ * @rflags: Flags for mapping.
+ *
+ * Return: 0 -- Success.
+ *
+ * This function will create the mapping from local iomem to rio space.
+ */
+int rio_map_outb_region(struct rio_mport *mport, u16 tid,
+		struct resource *rio_res, phys_addr_t lstart, u32 rflags)
+{
+	int rc = 0;
+	unsigned long flags;
+
+	if (!mport->mops)
+		return -1;
+	spin_lock_irqsave(&rio_config_lock, flags);
+	rc = mport->mops->map_outb(mport, lstart, rio_res->start,
+				resource_size(rio_res), tid, rflags);
+	spin_unlock_irqrestore(&rio_config_lock, flags);
+	return rc;
+}
+
+/**
+ * rio_unmap_inb_region -- Unmap the inbound memory region
+ * @mport: Master port
+ * @mem: Memory struction for unmapping.
+ */
+void rio_unmap_inb_region(struct rio_mport *mport, dma_addr_t lstart)
+{
+	unsigned long flags;
+	if (!mport->mops)
+		return;
+	spin_lock_irqsave(&rio_config_lock, flags);
+	mport->mops->unmap_inb(mport, lstart);
+	spin_unlock_irqrestore(&rio_config_lock, flags);
+}
+
+/**
+ * rio_unmap_outb_region -- Unmap the outbound memory region
+ * @mport: Master port
+ * @mem: Memory struction for unmapping.
+ */
+void rio_unmap_outb_region(struct rio_mport *mport, phys_addr_t lstart)
+{
+	unsigned long flags;
+	if (!mport->mops)
+		return;
+	spin_lock_irqsave(&rio_config_lock, flags);
+	mport->mops->unmap_outb(mport, lstart);
+	spin_unlock_irqrestore(&rio_config_lock, flags);
+}
+
+/**
  * rio_mport_get_feature - query for devices' extended features
  * @port: Master port to issue transaction
  * @local: Indicate a local master port or remote device access
diff --git a/include/linux/rio.h b/include/linux/rio.h
index dc0c755..dd61538 100644
--- a/include/linux/rio.h
+++ b/include/linux/rio.h
@@ -176,6 +176,7 @@ struct rio_mport {
 	struct rio_msg outb_msg[RIO_MAX_MBOX];
 	int host_deviceid;	/* Host device ID */
 	struct rio_ops *ops;	/* maintenance transaction functions */
+	struct rio_mem_ops *mops; /* Memory functions */
 	unsigned char id;	/* port ID, unique among all ports */
 	unsigned char index;	/* port index, unique among all port
 				   interfaces of the same type */
@@ -185,6 +186,7 @@ struct rio_mport {
 				 */
 	enum rio_phy_type phy_type;	/* RapidIO phy type */
 	unsigned char name[40];
+	struct device *dev;
 	void *priv;		/* Master port private data */
 };
 
@@ -319,6 +321,29 @@ struct rio_route_ops {
 			 u16 table, u16 route_destid, u8 * route_port);
 };
 
+extern struct resource rio_resource;
+#define request_rio_region(start, n, name, flag) \
+		__request_region(&rio_resource, (start), (n), (name), (flag))
+#define release_rio_region(start, n) __release_region(&rio_resource, (start), (n))
+
+/**
+ * Struct for RIO memory definition.
+ * @map_inb: The function for mapping inbound memory window.
+ * @map_outb: The function for mapping outbound memory window.
+ * @unmap_inb: The function for unmapping inbound memory window.
+ * @unmap_outb: The function for unmapping outbound memory window.
+ */
+struct rio_mem_ops {
+	int (*map_inb) (struct rio_mport *, dma_addr_t lstart,
+			resource_size_t rstart,
+			resource_size_t size, u32 flags);
+	int (*map_outb) (struct rio_mport *, phys_addr_t lstart,
+			resource_size_t rstart,
+			resource_size_t size, u16 tid, u32 flags);
+	void (*unmap_inb) (struct rio_mport *, dma_addr_t lstart);
+	void (*unmap_outb) (struct rio_mport *, phys_addr_t lstart);
+};
+
 /* Architecture and hardware-specific functions */
 extern int rio_init_mports(void);
 extern void rio_register_mport(struct rio_mport *);
diff --git a/include/linux/rio_drv.h b/include/linux/rio_drv.h
index c93a58a..685f2da 100644
--- a/include/linux/rio_drv.h
+++ b/include/linux/rio_drv.h
@@ -332,6 +332,16 @@ static inline void rio_init_dbell_res(struct resource *res, u16 start, u16 end)
 	res->flags = RIO_RESOURCE_DOORBELL;
 }
 
+static inline void rio_init_io_res(struct resource *res, resource_size_t start,
+		resource_size_t size, const char *name, unsigned long flag)
+{
+	memset(res, 0, sizeof(struct resource));
+	res->start = start;
+	res->end = start + size - 1;
+	res->name = name;
+	res->flags = flag;
+}
+
 /**
  * RIO_DEVICE - macro used to describe a specific RIO device
  * @dev: the 16 bit RIO device ID
@@ -406,12 +416,13 @@ extern int rio_release_inb_dbell(struct rio_mport *, u16, u16);
 extern struct resource *rio_request_outb_dbell(struct rio_dev *, u16, u16);
 extern int rio_release_outb_dbell(struct rio_dev *, struct resource *);
 
-/* Memory region management */
-int rio_claim_resource(struct rio_dev *, int);
-int rio_request_regions(struct rio_dev *, char *);
-void rio_release_regions(struct rio_dev *);
-int rio_request_region(struct rio_dev *, int, char *);
-void rio_release_region(struct rio_dev *, int);
+/* Memory low-level mapping functions */
+extern int rio_map_inb_region(struct rio_mport *, struct resource *,
+				dma_addr_t, u32);
+extern int rio_map_outb_region(struct rio_mport *, u16, struct resource *,
+				phys_addr_t, u32);
+extern void rio_unmap_inb_region(struct rio_mport *, dma_addr_t);
+extern void rio_unmap_outb_region(struct rio_mport *, phys_addr_t);
 
 /* LDM support */
 int rio_register_driver(struct rio_driver *);
@@ -461,5 +472,6 @@ extern u16 rio_local_get_device_id(struct rio_mport *port);
 extern struct rio_dev *rio_get_device(u16 vid, u16 did, struct rio_dev *from);
 extern struct rio_dev *rio_get_asm(u16 vid, u16 did, u16 asm_vid, u16 asm_did,
 				   struct rio_dev *from);
+extern u32 rio_get_mport_id(struct rio_mport *);
 
 #endif				/* LINUX_RIO_DRV_H */
-- 
1.5.4

[PATCH] powerpc/fsl_rio: use LAW address from device tree

[Li Yang]

Instead of fixed address in old code.

Signed-off-by: Li Yang <leoli@freescale.com>
---
 arch/powerpc/sysdev/fsl_rio.c |   12 +++++++-----
 1 files changed, 7 insertions(+), 5 deletions(-)

diff --git a/arch/powerpc/sysdev/fsl_rio.c b/arch/powerpc/sysdev/fsl_rio.c
index abdb124..fa0720f 100644
--- a/arch/powerpc/sysdev/fsl_rio.c
+++ b/arch/powerpc/sysdev/fsl_rio.c
@@ -1077,8 +1077,9 @@ int fsl_rio_setup(struct of_device *dev)
 
 	INIT_LIST_HEAD(&port->dbells);
 	port->iores.start = law_start;
-	port->iores.end = law_start + law_size;
+	port->iores.end = law_start + law_size - 1;
 	port->iores.flags = IORESOURCE_MEM;
+	port->iores.name = "rio_io_win";
 
 	priv->bellirq = irq_of_parse_and_map(dev->node, 2);
 	priv->txirq = irq_of_parse_and_map(dev->node, 3);
@@ -1156,14 +1157,15 @@ int fsl_rio_setup(struct of_device *dev)
 		out_be32((priv->regs_win + RIO_ISR_AACR), RIO_ISR_AACR_AA);
 
 	/* Configure maintenance transaction window */
-	out_be32(&priv->maint_atmu_regs->rowbar, 0x000c0000);
-	out_be32(&priv->maint_atmu_regs->rowar, 0x80077015);
+	out_be32(&priv->maint_atmu_regs->rowbar, law_start >> 12);
+	out_be32(&priv->maint_atmu_regs->rowar, 0x80077015);	/* 4M */
 
 	priv->maint_win = ioremap(law_start, RIO_MAINT_WIN_SIZE);
 
 	/* Configure outbound doorbell window */
-	out_be32(&priv->dbell_atmu_regs->rowbar, 0x000c0400);
-	out_be32(&priv->dbell_atmu_regs->rowar, 0x8004200b);
+	out_be32(&priv->dbell_atmu_regs->rowbar,
+			(law_start + RIO_MAINT_WIN_SIZE) >> 12);
+	out_be32(&priv->dbell_atmu_regs->rowar, 0x8004200b);	/* 4k */
 	fsl_rio_doorbell_init(port);
 
 	return 0;
-- 
1.5.4

[PATCH] powerpc: add memory map support to Freescale RapioIO block

[Li Yang]

The RIO memory map functions are used to support direct IO memory access
to RapidIO space.  The patch adds its support for Freescale RapidIO block
driver.

Signed-off-by: Zhang Wei <zw@zh-kernel.org>
Signed-off-by: Li Yang <leoli@freescale.com>
---
 arch/powerpc/sysdev/fsl_rio.c |  217 ++++++++++++++++++++++++++++++++++++++++-
 1 files changed, 215 insertions(+), 2 deletions(-)

diff --git a/arch/powerpc/sysdev/fsl_rio.c b/arch/powerpc/sysdev/fsl_rio.c
index fa0720f..7056dc0 100644
--- a/arch/powerpc/sysdev/fsl_rio.c
+++ b/arch/powerpc/sysdev/fsl_rio.c
@@ -31,6 +31,9 @@
 #define IRQ_RIO_TX(m)		(((struct rio_priv *)(m->priv))->txirq)
 #define IRQ_RIO_RX(m)		(((struct rio_priv *)(m->priv))->rxirq)
 
+#define IS_64BIT_DMA		((sizeof(dma_addr_t) == 8) ? 1 : 0)
+#define IS_64BIT_PHYS		((sizeof(phys_addr_t) == 8) ? 1 : 0)
+
 #define RIO_ATMU_REGS_OFFSET	0x10c00
 #define RIO_P_MSG_REGS_OFFSET	0x11000
 #define RIO_S_MSG_REGS_OFFSET	0x13000
@@ -40,6 +43,15 @@
 #define RIO_ISR_AACR_AA		0x1	/* Accept All ID */
 #define RIO_MAINT_WIN_SIZE	0x400000
 #define RIO_DBELL_WIN_SIZE	0x1000
+#define RIO_MAX_INB_ATMU	4
+#define RIO_MAX_OUTB_ATMU	8
+#define RIO_INB_ATMU_REGS_OFFSET	0x10de0
+#define RIO_ATMU_EN_MASK	0x80000000
+
+#define RIO_NREAD		0x4
+#define RIO_NWRITE		0x4
+#define RIO_NWRITE_R		0x5
+#define RIO_NREAD_R		0x5
 
 #define RIO_MSG_OMR_MUI		0x00000002
 #define RIO_MSG_OSR_TE		0x00000080
@@ -83,6 +95,15 @@ struct rio_atmu_regs {
 	u32 pad3[3];
 };
 
+struct rio_inb_atmu_regs {
+	u32 riwtar;
+	u32 pad1;
+	u32 riwbar;
+	u32 pad2;
+	u32 riwar;
+	u32 pad3[3];
+};
+
 struct rio_msg_regs {
 	u32 omr;
 	u32 osr;
@@ -341,6 +362,188 @@ fsl_rio_config_write(struct rio_mport *mport, int index, u16 destid,
 }
 
 /**
+ * fsl_rio_map_inb_mem -- Mapping inbound memory region.
+ * @mport: RapidIO master port
+ * @lstart: Local memory space start address.
+ * @rstart: RapidIO space start address.
+ * @size: The mapping region size.
+ * @flags: Flags for mapping. 0 for using default flags.
+ *
+ * Return: 0 -- Success.
+ *
+ * This function will create the inbound mapping
+ * from rstart to lstart.
+ */
+static int fsl_rio_map_inb_mem(struct rio_mport *mport, dma_addr_t lstart,
+		resource_size_t rstart,	resource_size_t size, u32 flags)
+{
+	int i;
+	struct rio_priv *priv = mport->priv;
+	struct rio_inb_atmu_regs __iomem *inbatmu = (struct rio_inb_atmu_regs *)
+				(priv->regs_win + RIO_INB_ATMU_REGS_OFFSET) - 1;
+	int size_ffs;
+	resource_size_t align;
+
+	if (flags == 0)
+		flags = (RIO_NREAD_R << 4) | RIO_NWRITE_R;
+
+	align = (size < 0x1000) ? 0x1000 : 1 << (__ilog2(size - 1) + 1);
+
+	/* Align the size */
+	if ((lstart + size) > (_ALIGN_DOWN(lstart, align) + align)) {
+		size_ffs = __ffs(_ALIGN_DOWN(lstart + size - 1, align));
+		size = 1 << (size_ffs +	(((_ALIGN_DOWN(lstart, 1 << size_ffs) +
+				(1 << size_ffs)) < (lstart + size)) ? 1 : 0));
+	} else
+		size = align;
+
+	if ((lstart & (size - 1)) != (rstart & (size - 1))) {
+		dev_err(mport->dev, "The local address 0x%llx can not be "
+			"aligned to the same size 0x%llx with the RapidIO "
+			"space address 0x%llx!\n", (unsigned long long)lstart,
+			(unsigned long long)size, (unsigned long long)rstart);
+		return -EINVAL;
+	}
+
+	/* Search for free inbound ATMU */
+	for (i = 1;
+		(i <= RIO_MAX_INB_ATMU) && (inbatmu->riwar & RIO_ATMU_EN_MASK);
+		i++, inbatmu--)
+		;
+
+	if (i > RIO_MAX_INB_ATMU) {
+		dev_err(mport->dev, "No free inbound ATMU!\n");
+		return -EBUSY;
+	}
+	out_be32(&inbatmu->riwtar, ((IS_64BIT_DMA ? (lstart >> 32)
+				& 0xf : 0) << 20) | ((lstart >> 12) & 0xfffff));
+	out_be32(&inbatmu->riwbar, ((IS_64BIT_DMA ? (rstart >> 32)
+				& 0x3 : 0) << 20) | ((rstart >> 12) & 0xfffff));
+	out_be32(&inbatmu->riwar, 0x80000000 | (0xf << 20)
+				| ((flags & 0xff) << 12)
+				| (__ilog2(size) - 1));
+	return 0;
+}
+
+/**
+ * fsl_rio_map_outb_mem -- Mapping outbound memory region.
+ * @mport: RapidIO master port
+ * @lstart: Local memory space start address.
+ * @rstart: RapidIO space start address.
+ * @size: The mapping region size.
+ * @tid: The target RapidIO device id.
+ * @flags: Flags for mapping. 0 for using default flags.
+ *
+ * Return: 0 -- Success.
+ *
+ * This function will create the outbound mapping
+ * from lstart to rstart.
+ */
+static int fsl_rio_map_outb_mem(struct rio_mport *mport, phys_addr_t lstart,
+		resource_size_t rstart,	resource_size_t size,
+		u16 tid, u32 flags)
+{
+	int i;
+	struct rio_priv *priv = mport->priv;
+	struct rio_atmu_regs __iomem *outbatmu = (struct rio_atmu_regs *)
+			(priv->regs_win + RIO_ATMU_REGS_OFFSET) + 1;
+	int size_ffs;
+	resource_size_t align;
+
+	if (flags == 0)
+		flags = (RIO_NREAD << 4) | RIO_NWRITE_R;
+
+	align = (size < 0x1000) ? 0x1000 : 1 << (__ilog2(size - 1) + 1);
+
+	/* Align the size */
+	if ((lstart + size) > (_ALIGN_DOWN(lstart, align) + align)) {
+		size_ffs = __ffs(_ALIGN_DOWN(lstart + size - 1, align));
+		size = 1 << (size_ffs +	(((_ALIGN_DOWN(lstart, 1 << size_ffs) +
+				(1 << size_ffs)) < (lstart + size)) ? 1 : 0));
+	} else
+		size = align;
+
+	if ((lstart & (size - 1)) != (rstart & (size - 1))) {
+		dev_err(mport->dev, "The local address 0x%llx can not be "
+			"aligned to the same size 0x%llx with the RapidIO "
+			"space address 0x%llx!\n", (unsigned long long)lstart,
+			(unsigned long long)size, (unsigned long long)rstart);
+		return -EINVAL;
+	}
+
+	/* Search for free outbound ATMU */
+	for (i = 1;
+	      (i <= RIO_MAX_OUTB_ATMU) && (outbatmu->rowar & RIO_ATMU_EN_MASK);
+	      i++, outbatmu++)
+		;
+
+	if (i > RIO_MAX_OUTB_ATMU) {
+		dev_err(mport->dev, "No free outbound ATMU!\n");
+		return -EBUSY;
+	}
+	out_be32(&outbatmu->rowtar, ((tid & 0x3ff) << 22)
+			| ((IS_64BIT_PHYS ? (rstart >> 32) & 0x3 : 0) << 20)
+			| ((rstart >> 12) & 0xfffff));
+	if (mport->phy_type == RIO_PHY_SERIAL)
+		out_be32(&outbatmu->rowtear, tid >> 10);
+	out_be32(&outbatmu->rowbar, ((IS_64BIT_PHYS ?
+					(lstart >> 32) & 0xf : 0) << 20)
+					| ((lstart >> 12) & 0xfffff));
+	out_be32(&outbatmu->rowar, 0x80000000
+				| ((flags & 0xff) << 12)
+				| (__ilog2(size) - 1));
+	return 0;
+}
+
+/**
+ * fsl_rio_unmap_inb_mem -- Unmapping inbound memory region.
+ * @mport: RapidIO master port
+ * @lstart: Local memory space start address.
+ */
+static void fsl_rio_unmap_inb_mem(struct rio_mport *mport,
+				dma_addr_t lstart)
+{
+	int i;
+	struct rio_priv *priv = mport->priv;
+	struct rio_inb_atmu_regs __iomem *inbatmu = (struct rio_inb_atmu_regs *)
+			(priv->regs_win + RIO_INB_ATMU_REGS_OFFSET) - 1;
+
+	/* Search for inbound ATMU */
+	for (i = 1; i <= RIO_MAX_INB_ATMU ; i++, inbatmu--) {
+		u32 tar = ((IS_64BIT_DMA ? (lstart >> 32) & 0xf : 0) << 20)
+			| ((lstart >> 12) & 0xfffff);
+		if (inbatmu->riwtar == tar) {
+			out_be32(&inbatmu->riwar, ~(RIO_ATMU_EN_MASK));
+			return;
+		}
+	}
+}
+
+/**
+ * fsl_rio_unmap_outb_mem -- Unmapping outbound memory region.
+ * @mport: RapidIO master port
+ * @lstart: Local memory space start address.
+ */
+static void fsl_rio_unmap_outb_mem(struct rio_mport *mport,
+				phys_addr_t lstart)
+{
+	int i;
+	struct rio_priv *priv = mport->priv;
+	struct rio_atmu_regs __iomem *outbatmu = (struct rio_atmu_regs *)
+			(priv->regs_win + RIO_ATMU_REGS_OFFSET) + 1;
+
+	/* Search for outbound ATMU */
+	for (i = 1; i <= RIO_MAX_OUTB_ATMU ; i++, outbatmu++) {
+		u32 bar = ((IS_64BIT_PHYS ? (lstart >> 32) & 0xf : 0) << 20)
+			| ((lstart >> 12) & 0xfffff);
+		if (outbatmu->rowbar == bar) {
+			out_be32(&outbatmu->rowar, ~(RIO_ATMU_EN_MASK));
+			return;
+		}
+	}
+}
+
+/**
  * rio_hw_add_outb_message - Add message to the MPC85xx outbound message queue
  * @mport: Master port with outbound message queue
  * @rdev: Target of outbound message
@@ -951,6 +1154,13 @@ static int fsl_rio_get_cmdline(char *s)
 
 __setup("riohdid=", fsl_rio_get_cmdline);
 
+static struct rio_mem_ops fsl_mem_ops = {
+	.map_inb = fsl_rio_map_inb_mem,
+	.map_outb = fsl_rio_map_outb_mem,
+	.unmap_inb = fsl_rio_unmap_inb_mem,
+	.unmap_outb = fsl_rio_unmap_outb_mem,
+};
+
 static inline void fsl_rio_info(struct device *dev, u32 ccsr)
 {
 	const char *str;
@@ -1026,8 +1236,9 @@ int fsl_rio_setup(struct of_device *dev)
 		return -EFAULT;
 	}
 	dev_info(&dev->dev, "Of-device full name %s\n", dev->node->full_name);
-	dev_info(&dev->dev, "Regs start 0x%08x size 0x%08x\n",	regs.start,
-						regs.end - regs.start + 1);
+	dev_info(&dev->dev, "Regs start 0x%llx size 0x%llx\n",
+			(unsigned long long)regs.start,
+			(unsigned long long)(regs.end - regs.start + 1));
 
 	dt_range = of_get_property(dev->node, "ranges", &rlen);
 	if (!dt_range) {
@@ -1067,6 +1278,7 @@ int fsl_rio_setup(struct of_device *dev)
 	port = kzalloc(sizeof(struct rio_mport), GFP_KERNEL);
 	port->id = 0;
 	port->index = 0;
+	port->dev = &dev->dev;
 
 	priv = kzalloc(sizeof(struct rio_priv), GFP_KERNEL);
 	if (!priv) {
@@ -1095,6 +1307,7 @@ int fsl_rio_setup(struct of_device *dev)
 	priv->dev = &dev->dev;
 
 	port->ops = ops;
+	port->mops = &fsl_mem_ops;
 	port->host_deviceid = fsl_rio_get_hdid(port->id);
 
 	port->priv = priv;
-- 
1.5.4

[PATCH] rionet: add memory access to simulated Ethernet over rapidio

[Li Yang]

Through the newly added IO memory access of Rapidio, sender can
write directly to recipient's rx buffer, either by cpu or DMA engine.

Signed-off-by: Zhang Wei <zw@zh-kernel.org>
Signed-off-by: Li Yang <leoli@freescale.com>
---
 drivers/net/Kconfig  |   10 ++
 drivers/net/rionet.c |  365 +++++++++++++++++++++++++++++++++++++++++++++++++-
 2 files changed, 371 insertions(+), 4 deletions(-)

diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 214a92d..1e88e26 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -2736,6 +2736,16 @@ config RIONET_RX_SIZE
 	depends on RIONET
 	default "128"
 
+config RIONET_MEMMAP
+	bool "Use memory map instead of message"
+	depends on RIONET
+	default n
+
+config RIONET_DMA
+	bool "Use DMA for memory mapping data transfer"
+	depends on RIONET_MEMMAP && FSL_DMA
+	default y
+
 config FDDI
 	tristate "FDDI driver support"
 	depends on (PCI || EISA || TC)
diff --git a/drivers/net/rionet.c b/drivers/net/rionet.c
index ec59e29..c38e51e 100644
--- a/drivers/net/rionet.c
+++ b/drivers/net/rionet.c
@@ -1,6 +1,8 @@
 /*
  * rionet - Ethernet driver over RapidIO messaging services
  *
+ * Copyright (C) 2007-2009 Freescale Semiconductor, Inc.
+ *
  * Copyright 2005 MontaVista Software, Inc.
  * Matt Porter <mporter@kernel.crashing.org>
  *
@@ -23,6 +25,7 @@
 #include <linux/skbuff.h>
 #include <linux/crc32.h>
 #include <linux/ethtool.h>
+#include <linux/dmaengine.h>
 
 #define DRV_NAME        "rionet"
 #define DRV_VERSION     "0.2"
@@ -40,13 +43,48 @@ MODULE_LICENSE("GPL");
 			 NETIF_MSG_TX_ERR)
 
 #define RIONET_DOORBELL_JOIN	0x1000
+#ifdef CONFIG_RIONET_MEMMAP
+#define RIONET_DOORBELL_SEND	0x1001
+#define RIONET_DOORBELL_LEAVE	0x1002
+#else
 #define RIONET_DOORBELL_LEAVE	0x1001
+#endif
 
 #define RIONET_MAILBOX		0
 
 #define RIONET_TX_RING_SIZE	CONFIG_RIONET_TX_SIZE
 #define RIONET_RX_RING_SIZE	CONFIG_RIONET_RX_SIZE
 
+#define ERR(fmt, arg...) \
+	printk(KERN_ERR "ERROR %s - %s: " fmt,  __FILE__, __func__, ## arg)
+
+#ifdef CONFIG_RIONET_MEMMAP
+/* Definitions for rionet memory map driver */
+#define RIONET_DRVID		0x101
+#define RIONET_MAX_SK_DATA_SIZE	0x1000
+#define RIONET_MEM_RIO_BASE	0x10000000
+#define RIONET_TX_RX_BUFF_SIZE	(0x1000 * (128 + 128))
+#define RIONET_QUEUE_NEXT(x)	(((x) < 127) ? ((x) + 1) : 0)
+#define RIONET_QUEUE_INC(x)	(x = RIONET_QUEUE_NEXT(x))
+
+struct sk_data {
+	u8	data[0x1000];
+};
+
+#define RIONET_SKDATA_EN	0x80000000
+struct rionet_tx_rx_buff {
+	int		enqueue;		/* enqueue point */
+	int		dequeue;		/* dequeue point */
+	u32		size[128];		/* size[i] is skdata[i] size
+						 * the most high bit [31] is
+						 * enable bit. The
+						 * max size is 4096.
+						 */
+	u8		rev1[3576];
+	struct sk_data	skdata[128];		/* all size are 0x1000 * 128 */
+};
+#endif /* CONFIG_RIONET_MEMMAP */
+
 static LIST_HEAD(rionet_peers);
 
 struct rionet_private {
@@ -60,6 +98,19 @@ struct rionet_private {
 	spinlock_t lock;
 	spinlock_t tx_lock;
 	u32 msg_enable;
+#ifdef CONFIG_RIONET_MEMMAP
+	struct rionet_tx_rx_buff *rxbuff;
+	struct rionet_tx_rx_buff __iomem *txbuff;
+	dma_addr_t rx_addr;
+	phys_addr_t tx_addr;
+	struct resource *riores;
+#ifdef CONFIG_RIONET_DMA
+	struct dma_chan *txdmachan;
+	struct dma_chan *rxdmachan;
+	struct dma_client rio_dma_client;
+	spinlock_t rio_dma_event_lock;
+#endif
+#endif
 };
 
 struct rionet_peer {
@@ -90,6 +141,7 @@ static struct rio_dev **rionet_active;
 #define RIONET_MAC_MATCH(x)	(*(u32 *)x == 0x00010001)
 #define RIONET_GET_DESTID(x)	(*(u16 *)(x + 4))
 
+#ifndef CONFIG_RIONET_MEMMAP
 static int rionet_rx_clean(struct net_device *ndev)
 {
 	int i;
@@ -108,9 +160,11 @@ static int rionet_rx_clean(struct net_device *ndev)
 
 		rnet->rx_skb[i]->data = data;
 		skb_put(rnet->rx_skb[i], RIO_MAX_MSG_SIZE);
+		rnet->rx_skb[i]->dev = ndev;
 		rnet->rx_skb[i]->protocol =
 		    eth_type_trans(rnet->rx_skb[i], ndev);
 		error = netif_rx(rnet->rx_skb[i]);
+		rnet->rx_skb[i] = NULL;
 
 		if (error == NET_RX_DROP) {
 			ndev->stats.rx_dropped++;
@@ -128,6 +182,7 @@ static int rionet_rx_clean(struct net_device *ndev)
 
 	return i;
 }
+#endif
 
 static void rionet_rx_fill(struct net_device *ndev, int end)
 {
@@ -141,19 +196,86 @@ static void rionet_rx_fill(struct net_device *ndev, int end)
 		if (!rnet->rx_skb[i])
 			break;
 
+#ifndef CONFIG_RIONET_MEMMAP
 		rio_add_inb_buffer(rnet->mport, RIONET_MAILBOX,
 				   rnet->rx_skb[i]->data);
+#endif
 	} while ((i = (i + 1) % RIONET_RX_RING_SIZE) != end);
 
 	rnet->rx_slot = i;
 }
 
+#ifdef CONFIG_RIONET_MEMMAP
+static int rio_send_mem(struct sk_buff *skb,
+				struct net_device *ndev, struct rio_dev *rdev)
+{
+	struct rionet_private *rnet = netdev_priv(ndev);
+	int enqueue, dequeue;
+
+	if (!rdev)
+		return -EFAULT;
+
+	if (skb->len > RIONET_MAX_SK_DATA_SIZE) {
+		printk(KERN_ERR "Frame len is more than RIONET max sk_data!\n");
+		return -EINVAL;
+	}
+
+	rio_map_outb_region(rnet->mport, rdev->destid, rnet->riores,
+			rnet->tx_addr, 0);
+
+	enqueue = in_be32(&rnet->txbuff->enqueue);
+	dequeue = in_be32(&rnet->txbuff->dequeue);
+
+	if (!(in_be32(&rnet->txbuff->size[enqueue]) & RIONET_SKDATA_EN)
+			&& (RIONET_QUEUE_NEXT(enqueue) != dequeue)) {
+#ifdef CONFIG_RIONET_DMA
+		struct dma_device *dmadev;
+		struct dma_async_tx_descriptor *tx;
+		dma_cookie_t tx_cookie = 0;
+
+		dmadev = rnet->txdmachan->device;
+		tx = dmadev->device_prep_dma_memcpy(rnet->txdmachan,
+			(void *)rnet->txbuff->skdata[enqueue].data
+			  - (void *)rnet->txbuff rnet->tx_addr,
+			dma_map_single(&ndev->dev, skb->data, skb->len,
+			  DMA_TO_DEVICE), skb->len, DMA_CTRL_ACK);
+		if (!tx)
+			return -EFAULT;
+		tx_cookie = tx->tx_submit(tx);
+
+		dma_async_memcpy_issue_pending(rnet->txdmachan);
+		while (dma_async_memcpy_complete(rnet->txdmachan,
+				tx_cookie, NULL, NULL) == DMA_IN_PROGRESS) ;
+#else
+		memcpy(rnet->txbuff->skdata[enqueue].data, skb->data, skb->len);
+#endif /* CONFIG_RIONET_DMA */
+		out_be32(&rnet->txbuff->size[enqueue],
+						RIONET_SKDATA_EN | skb->len);
+		out_be32(&rnet->txbuff->enqueue,
+						RIONET_QUEUE_NEXT(enqueue));
+		in_be32(&rnet->txbuff->enqueue);	/* verify read */
+	} else if (netif_msg_tx_err(rnet))
+		printk(KERN_ERR "rionmet(memmap): txbuff is busy!\n");
+
+	rio_unmap_outb_region(rnet->mport, rnet->tx_addr);
+	rio_send_doorbell(rdev, RIONET_DOORBELL_SEND);
+	return 0;
+}
+#endif
+
 static int rionet_queue_tx_msg(struct sk_buff *skb, struct net_device *ndev,
 			       struct rio_dev *rdev)
 {
 	struct rionet_private *rnet = netdev_priv(ndev);
 
+#ifdef CONFIG_RIONET_MEMMAP
+	int ret = 0;
+	ret = rio_send_mem(skb, ndev, rdev);
+	if (ret)
+		return ret;
+#else
 	rio_add_outb_message(rnet->mport, rdev, 0, skb->data, skb->len);
+#endif
 	rnet->tx_skb[rnet->tx_slot] = skb;
 
 	ndev->stats.tx_packets++;
@@ -165,6 +287,19 @@ static int rionet_queue_tx_msg(struct sk_buff *skb, struct net_device *ndev,
 	++rnet->tx_slot;
 	rnet->tx_slot &= (RIONET_TX_RING_SIZE - 1);
 
+#ifdef CONFIG_RIONET_MEMMAP
+	while (rnet->tx_cnt && (rnet->ack_slot != rnet->tx_slot)) {
+		/* dma unmap single */
+		dev_kfree_skb_any(rnet->tx_skb[rnet->ack_slot]);
+		rnet->tx_skb[rnet->ack_slot] = NULL;
+		++rnet->ack_slot;
+		rnet->ack_slot &= (RIONET_TX_RING_SIZE - 1);
+		rnet->tx_cnt--;
+	}
+
+	if (rnet->tx_cnt < RIONET_TX_RING_SIZE)
+		netif_wake_queue(ndev);
+#endif
 	if (netif_msg_tx_queued(rnet))
 		printk(KERN_INFO "%s: queued skb %8.8x len %8.8x\n", DRV_NAME,
 		       (u32) skb, skb->len);
@@ -211,6 +346,92 @@ static int rionet_start_xmit(struct sk_buff *skb, struct net_device *ndev)
 	return 0;
 }
 
+#ifdef CONFIG_RIONET_MEMMAP
+static void rio_recv_mem(struct net_device *ndev)
+{
+	struct rionet_private *rnet = netdev_priv(ndev);
+	struct sk_buff *skb;
+	u32 enqueue, dequeue, size;
+	int error = 0;
+#ifdef CONFIG_RIONET_DMA
+	dma_cookie_t rx_cookie = 0;
+	struct dma_device *dmadev;
+	struct dma_async_tx_descriptor *tx;
+#endif
+
+	dequeue = rnet->rxbuff->dequeue;
+	enqueue = rnet->rxbuff->enqueue;
+
+	while (enqueue != dequeue) {
+		size = rnet->rxbuff->size[dequeue];
+		if (!(size & RIONET_SKDATA_EN))
+			return;
+		size &= ~RIONET_SKDATA_EN;
+
+		skb = dev_alloc_skb(size + 2);
+		if (!skb)
+			return;
+
+#ifdef CONFIG_RIONET_DMA
+		dmadev = rnet->rxdmachan->device;
+		tx = dmadev->device_prep_dma_memcpy(rnet->rxdmachan,
+			dma_map_single(&ndev->dev, skb_put(skb, size),
+			  size, DMA_FROM_DEVICE),
+			(void *)rnet->rxbuff->skdata[dequeue].data
+			  - (void *)rnet->rxbuff + rnet->rx_addr,
+			size, DMA_CTRL_ACK);
+		if (!tx)
+			return;
+		rx_cookie = tx->tx_submit(tx);
+		dma_async_memcpy_issue_pending(rnet->rxdmachan);
+		while (dma_async_memcpy_complete(rnet->rxdmachan,
+				rx_cookie, NULL, NULL) == DMA_IN_PROGRESS);
+#else
+		memcpy(skb_put(skb, size),
+				rnet->rxbuff->skdata[dequeue].data,
+				size);
+#endif /* CONFIG_RIONET_DMA */
+		skb->dev = ndev;
+		skb->protocol = eth_type_trans(skb, ndev);
+		skb->ip_summed = CHECKSUM_UNNECESSARY;
+
+		error = netif_rx(skb);
+
+		rnet->rxbuff->size[dequeue] &= ~RIONET_SKDATA_EN;
+		rnet->rxbuff->dequeue = RIONET_QUEUE_NEXT(dequeue);
+		dequeue = RIONET_QUEUE_NEXT(dequeue);
+
+		if (error == NET_RX_DROP) {
+			ndev->stats.rx_dropped++;
+		} else if (error == NET_RX_BAD) {
+			if (netif_msg_rx_err(rnet))
+				printk(KERN_WARNING "%s: bad rx packet\n",
+				       DRV_NAME);
+			ndev->stats.rx_errors++;
+		} else {
+			ndev->stats.rx_packets++;
+			ndev->stats.rx_bytes += RIO_MAX_MSG_SIZE;
+		}
+	}
+}
+
+static void rionet_inb_recv_event(struct rio_mport *mport, void *dev_id)
+{
+	struct net_device *ndev = dev_id;
+	struct rionet_private *rnet = netdev_priv(ndev);
+	unsigned long flags;
+
+	if (netif_msg_intr(rnet))
+		printk(KERN_INFO "%s: inbound memory data receive event\n",
+		       DRV_NAME);
+
+	spin_lock_irqsave(&rnet->lock, flags);
+	rio_recv_mem(ndev);
+	spin_unlock_irqrestore(&rnet->lock, flags);
+}
+#endif
+
+
 static void rionet_dbell_event(struct rio_mport *mport, void *dev_id, u16 sid, u16 tid,
 			       u16 info)
 {
@@ -232,6 +453,10 @@ static void rionet_dbell_event(struct rio_mport *mport, void *dev_id, u16 sid, u
 		}
 	} else if (info == RIONET_DOORBELL_LEAVE) {
 		rionet_active[sid] = NULL;
+#ifdef CONFIG_RIONET_MEMMAP
+	} else if (info == RIONET_DOORBELL_SEND) {
+		rionet_inb_recv_event(mport, ndev);
+#endif
 	} else {
 		if (netif_msg_intr(rnet))
 			printk(KERN_WARNING "%s: unhandled doorbell\n",
@@ -239,6 +464,7 @@ static void rionet_dbell_event(struct rio_mport *mport, void *dev_id, u16 sid, u
 	}
 }
 
+#ifndef CONFIG_RIONET_MEMMAP
 static void rionet_inb_msg_event(struct rio_mport *mport, void *dev_id, int mbox, int slot)
 {
 	int n;
@@ -281,6 +507,58 @@ static void rionet_outb_msg_event(struct rio_mport *mport, void *dev_id, int mbo
 
 	spin_unlock(&rnet->lock);
 }
+#endif
+
+#ifdef CONFIG_RIONET_DMA
+static enum dma_state_client rionet_dma_event(struct dma_client *client,
+		struct dma_chan *chan, enum dma_state state)
+{
+	struct rionet_private *rnet = container_of(client,
+			struct rionet_private, rio_dma_client);
+	enum dma_state_client ack = DMA_DUP;
+
+	spin_lock(&rnet->lock);
+	switch (state) {
+	case DMA_RESOURCE_AVAILABLE:
+		if (!rnet->txdmachan) {
+			ack = DMA_ACK;
+			rnet->txdmachan = chan;
+		} else if (!rnet->rxdmachan) {
+			ack = DMA_ACK;
+			rnet->rxdmachan = chan;
+		}
+		break;
+	case DMA_RESOURCE_REMOVED:
+		if (rnet->txdmachan == chan) {
+			ack = DMA_ACK;
+			rnet->txdmachan = NULL;
+		} else if (rnet->rxdmachan == chan) {
+			ack = DMA_ACK;
+			rnet->rxdmachan = NULL;
+		}
+		break;
+	default:
+		break;
+	}
+	spin_unlock(&rnet->lock);
+	return ack;
+}
+
+static int rionet_dma_register(struct rionet_private *rnet)
+{
+	int rc = 0;
+	spin_lock_init(&rnet->rio_dma_event_lock);
+	rnet->rio_dma_client.event_callback = rionet_dma_event;
+	dma_cap_set(DMA_MEMCPY, rnet->rio_dma_client.cap_mask);
+	dma_async_client_register(&rnet->rio_dma_client);
+	dma_async_client_chan_request(&rnet->rio_dma_client);
+
+	if (!rnet->txdmachan || !rnet->rxdmachan)
+		rc = -ENODEV;
+
+	return rc;
+}
+#endif
 
 static int rionet_open(struct net_device *ndev)
 {
@@ -297,21 +575,63 @@ static int rionet_open(struct net_device *ndev)
 					RIONET_DOORBELL_JOIN,
 					RIONET_DOORBELL_LEAVE,
 					rionet_dbell_event)) < 0)
-		goto out;
+		return rc;
+
+#ifdef CONFIG_RIONET_MEMMAP
+	if (!request_rio_region(RIONET_MEM_RIO_BASE, RIONET_TX_RX_BUFF_SIZE,
+				ndev->name, 0)) {
+		dev_err(&ndev->dev, "RapidIO space busy\n");
+		rc = -EBUSY;
+		goto out1;
+	}
 
+	rnet->riores = kmalloc(sizeof(struct resource), GFP_KERNEL);
+	if (!rnet->riores) {
+		rc = -ENOMEM;
+		goto out2;
+	}
+	rnet->riores->start = RIONET_MEM_RIO_BASE;
+	rnet->riores->end = RIONET_MEM_RIO_BASE + RIONET_TX_RX_BUFF_SIZE - 1;
+	rnet->rxbuff = dma_alloc_coherent(&ndev->dev, RIONET_TX_RX_BUFF_SIZE,
+			&rnet->rx_addr, GFP_KERNEL);
+	if (!rnet->rxbuff) {
+		rc = -ENOMEM;
+		goto out3;
+	}
+	rc = rio_map_inb_region(rnet->mport, rnet->riores, rnet->rx_addr, 0);
+	if (rc) {
+		rc = -EBUSY;
+		goto out4;
+	}
+	
+	/* Use space right after the doorbell window, aligned to
+	 * size of RIONET_TX_RX_BUFF_SIZE */
+	rnet->tx_addr = rnet->mport->iores.start + 0x500000;
+	rnet->txbuff = ioremap(rnet->tx_addr, resource_size(rnet->riores));
+	if (!rnet->txbuff) {
+		rc = -ENOMEM;
+		goto out5;
+	}
+#ifdef CONFIG_RIONET_DMA
+	rc = rionet_dma_register(rnet);
+	if (rc)
+		goto out6;
+#endif /* CONFIG_RIONET_DMA */
+#else
 	if ((rc = rio_request_inb_mbox(rnet->mport,
 				       (void *)ndev,
 				       RIONET_MAILBOX,
 				       RIONET_RX_RING_SIZE,
 				       rionet_inb_msg_event)) < 0)
-		goto out;
+		goto out1;
 
 	if ((rc = rio_request_outb_mbox(rnet->mport,
 					(void *)ndev,
 					RIONET_MAILBOX,
 					RIONET_TX_RING_SIZE,
 					rionet_outb_msg_event)) < 0)
-		goto out;
+		goto out8;
+#endif
 
 	/* Initialize inbound message ring */
 	for (i = 0; i < RIONET_RX_RING_SIZE; i++)
@@ -344,8 +664,31 @@ static int rionet_open(struct net_device *ndev)
 		if (pwdcsr & RIO_DOORBELL_AVAIL)
 			rio_send_doorbell(peer->rdev, RIONET_DOORBELL_JOIN);
 	}
+	return 0;
 
-      out:
+#ifndef CONFIG_RIONET_MEMMAP
+out8:
+	rio_release_inb_mbox(rnet->mport, RIONET_MAILBOX);
+#else
+#ifdef CONFIG_RIONET_DMA
+out6:
+	iounmap(rnet->txbuff);
+#endif
+out5:
+	rio_unmap_inb_region(rnet->mport, rnet->rx_addr);
+out4:
+	dma_free_coherent(&ndev->dev, RIONET_TX_RX_BUFF_SIZE,
+			rnet->rxbuff, rnet->rx_addr);
+	rnet->rxbuff = NULL;
+	rnet->txbuff = NULL;
+out3:
+	kfree(rnet->riores);
+out2:
+	release_rio_region(RIONET_MEM_RIO_BASE, RIONET_TX_RX_BUFF_SIZE);
+#endif
+out1:
+	rio_release_inb_dbell(rnet->mport, RIONET_DOORBELL_JOIN,
+			RIONET_DOORBELL_LEAVE);
 	return rc;
 }
 
@@ -374,8 +717,22 @@ static int rionet_close(struct net_device *ndev)
 
 	rio_release_inb_dbell(rnet->mport, RIONET_DOORBELL_JOIN,
 			      RIONET_DOORBELL_LEAVE);
+#ifdef CONFIG_RIONET_MEMMAP
+	rio_unmap_inb_region(rnet->mport, rnet->rx_addr);
+	iounmap(rnet->txbuff);
+	dma_free_coherent(&ndev->dev, RIONET_TX_RX_BUFF_SIZE,
+			rnet->rxbuff, rnet->rx_addr);
+	kfree(rnet->riores);
+	release_rio_region(RIONET_MEM_RIO_BASE, RIONET_TX_RX_BUFF_SIZE);
+	rnet->rxbuff = NULL;
+	rnet->txbuff = NULL;
+#ifdef CONFIG_RIONET_DMA
+	dma_async_client_unregister(&rnet->rio_dma_client);
+#endif
+#else
 	rio_release_inb_mbox(rnet->mport, RIONET_MAILBOX);
 	rio_release_outb_mbox(rnet->mport, RIONET_MAILBOX);
+#endif
 
 	return 0;
 }
-- 
1.5.4

[PATCH] rio: warn_unused_result warnings fix

[Li Yang]

warning: ignoring return value of 'device_add', declared with attribute warn_unused_result
warning: ignoring return value of 'sysfs_create_bin_file', declared with attribute warn_unused_result

Signed-off-by: Li Yang <leoli@freescale.com>
---
 drivers/rapidio/rio-scan.c  |    5 ++++-
 drivers/rapidio/rio-sysfs.c |    6 ++++--
 2 files changed, 8 insertions(+), 3 deletions(-)

diff --git a/drivers/rapidio/rio-scan.c b/drivers/rapidio/rio-scan.c
index 74d0bfa..9309e24 100644
--- a/drivers/rapidio/rio-scan.c
+++ b/drivers/rapidio/rio-scan.c
@@ -265,7 +265,10 @@ static void rio_route_set_ops(struct rio_dev *rdev)
  */
 static void __devinit rio_add_device(struct rio_dev *rdev)
 {
-	device_add(&rdev->dev);
+	int err;
+
+	err = device_add(&rdev->dev);
+	WARN_ON(err);
 
 	spin_lock(&rio_global_list_lock);
 	list_add_tail(&rdev->global_list, &rio_devices);
diff --git a/drivers/rapidio/rio-sysfs.c b/drivers/rapidio/rio-sysfs.c
index 97a147f..ba742e8 100644
--- a/drivers/rapidio/rio-sysfs.c
+++ b/drivers/rapidio/rio-sysfs.c
@@ -214,9 +214,11 @@ static struct bin_attribute rio_config_attr = {
  */
 int rio_create_sysfs_dev_files(struct rio_dev *rdev)
 {
-	sysfs_create_bin_file(&rdev->dev.kobj, &rio_config_attr);
+	int err = 0;
 
-	return 0;
+	err = sysfs_create_bin_file(&rdev->dev.kobj, &rio_config_attr);
+
+	return err;
 }
 
 /**
-- 
1.5.4

Re: [PATCH] rio: warn_unused_result warnings fix

[Michael Ellerman]

[-- Attachment #1: Type: text/plain, Size: 1099 bytes --]

On Tue, 2009-04-28 at 18:15 +0800, Li Yang wrote:
> warning: ignoring return value of 'device_add', declared with attribute warn_unused_result
> warning: ignoring return value of 'sysfs_create_bin_file', declared with attribute warn_unused_result
> 
> Signed-off-by: Li Yang <leoli@freescale.com>
> ---
>  drivers/rapidio/rio-scan.c  |    5 ++++-
>  drivers/rapidio/rio-sysfs.c |    6 ++++--
>  2 files changed, 8 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/rapidio/rio-scan.c b/drivers/rapidio/rio-scan.c
> index 74d0bfa..9309e24 100644
> --- a/drivers/rapidio/rio-scan.c
> +++ b/drivers/rapidio/rio-scan.c
> @@ -265,7 +265,10 @@ static void rio_route_set_ops(struct rio_dev *rdev)
>   */
>  static void __devinit rio_add_device(struct rio_dev *rdev)
>  {
> -	device_add(&rdev->dev);
> +	int err;
> +
> +	err = device_add(&rdev->dev);
> +	WARN_ON(err);
>  
>  	spin_lock(&rio_global_list_lock);
>  	list_add_tail(&rdev->global_list, &rio_devices);

Is that really useful? Why not return the error to rio_setup_device()
which can tell it's caller.

cheers

[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 197 bytes --]

Re: [PATCH] rio: warn_unused_result warnings fix

[Li Yang]

On Tue, Apr 28, 2009 at 6:51 PM, Michael Ellerman
<michael@ellerman.id.au> wrote:
> On Tue, 2009-04-28 at 18:15 +0800, Li Yang wrote:
>> warning: ignoring return value of 'device_add', declared with attribute =
warn_unused_result
>> warning: ignoring return value of 'sysfs_create_bin_file', declared with=
 attribute warn_unused_result
>>
>> Signed-off-by: Li Yang <leoli@freescale.com>
>> ---
>> =C2=A0drivers/rapidio/rio-scan.c =C2=A0| =C2=A0 =C2=A05 ++++-
>> =C2=A0drivers/rapidio/rio-sysfs.c | =C2=A0 =C2=A06 ++++--
>> =C2=A02 files changed, 8 insertions(+), 3 deletions(-)
>>
>> diff --git a/drivers/rapidio/rio-scan.c b/drivers/rapidio/rio-scan.c
>> index 74d0bfa..9309e24 100644
>> --- a/drivers/rapidio/rio-scan.c
>> +++ b/drivers/rapidio/rio-scan.c
>> @@ -265,7 +265,10 @@ static void rio_route_set_ops(struct rio_dev *rdev)
>> =C2=A0 */
>> =C2=A0static void __devinit rio_add_device(struct rio_dev *rdev)
>> =C2=A0{
>> - =C2=A0 =C2=A0 device_add(&rdev->dev);
>> + =C2=A0 =C2=A0 int err;
>> +
>> + =C2=A0 =C2=A0 err =3D device_add(&rdev->dev);
>> + =C2=A0 =C2=A0 WARN_ON(err);
>>
>> =C2=A0 =C2=A0 =C2=A0 spin_lock(&rio_global_list_lock);
>> =C2=A0 =C2=A0 =C2=A0 list_add_tail(&rdev->global_list, &rio_devices);
>
> Is that really useful? Why not return the error to rio_setup_device()
> which can tell it's caller.

IMHO, when device_add() fails the system is quite broken.  So the
value is very limited for it to fail cleanly, which need some effort
to implement.  I can add it if you insist.

- Leo

Re: [PATCH] rio: warn_unused_result warnings fix

[David Miller]

From: Li Yang <leoli@freescale.com>
Date: Tue, 28 Apr 2009 19:08:13 +0800

> IMHO, when device_add() fails the system is quite broken.  So the
> value is very limited for it to fail cleanly, which need some effort
> to implement.  I can add it if you insist.

I disagree.

For the cases where device_add() fails (duplicate name, for
example) the device layer already is emitting warnings.

You're just adding more log messages for the user to sift
through, and likely not adding any new information.

Re: [PATCH] rapidio: add common mapping APIs for RapidIO memory access

[David Miller]

Please number your patches. :-/

There is no way for anyone to be able to tell in what order
your changes should be applied.

Since you're going to wait for feedback anyways, you can
fix this up when you make your next submission of these
changes.

Re: [PATCH] rapidio: add common mapping APIs for RapidIO memory access

[Li Yang]

On Tue, Apr 28, 2009 at 7:39 PM, David Miller <davem@davemloft.net> wrote:
>
> Please number your patches. :-/
>
> There is no way for anyone to be able to tell in what order
> your changes should be applied.

Sorry for that.  I thought I have added -n when doing the
git-format-patch, but it turns out not the case. :(  Will double check
next time.

- Leo

Re: [PATCH] rapidio: add common mapping APIs for RapidIO memory access

[Kumar Gala]

On Apr 30, 2009, at 12:10 AM, Li Yang wrote:

> On Tue, Apr 28, 2009 at 7:39 PM, David Miller <davem@davemloft.net>  
> wrote:
>>
>> Please number your patches. :-/
>>
>> There is no way for anyone to be able to tell in what order
>> your changes should be applied.
>
> Sorry for that.  I thought I have added -n when doing the
> git-format-patch, but it turns out not the case. :(  Will double check
> next time.
>
> - Leo

Do you plan on reposting them?

- k

Re: [PATCH 0/5] rapidio: adding memory mapping IO support and misc fixes

[Kumar Gala]

On Apr 28, 2009, at 5:16 AM, Li Yang wrote:

> The patch series add MMIO support to Linux rapidio and fix a few nits.
> The patches cross rapidio, netdev, powerpc sub-systems.  It will be
> good for them to go through one tree.  Probably Andrew?  As the
> previous rapidio patches are mostly merged by you.
>
> - Leo

When you repost use the -n option in git-format-patch so we get a  
sequence # for the patches.

Either Andrew or I can possible pick them up as long as we get the  
right maintainer ACKs.

- k