linuxppc-dev.lists.ozlabs.org archive mirror
 help / color / mirror / Atom feed
From: Wolfgang Denk <wd@denx.de>
To: linuxppc-dev@ozlabs.org
Cc: Piotr Ziecik <kosmo@semihalf.com>, Wolfgang Denk <wd@denx.de>
Subject: [PATCH 09/12] mpc5121ads: Added I2C RTC node to mpc5121ads DTS.
Date: Wed,  6 May 2009 22:15:16 +0200	[thread overview]
Message-ID: <1241640919-4650-10-git-send-email-wd@denx.de> (raw)
In-Reply-To: <1241640919-4650-1-git-send-email-wd@denx.de>

From: Piotr Ziecik <kosmo@semihalf.com>

Signed-off-by: Piotr Ziecik <kosmo@semihalf.com>
Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: John Rigby <jcrigby@gmail.com>
---
 arch/powerpc/boot/dts/mpc5121ads.dts |    5 +++++
 1 files changed, 5 insertions(+), 0 deletions(-)

diff --git a/arch/powerpc/boot/dts/mpc5121ads.dts b/arch/powerpc/boot/dts/mpc5121ads.dts
index 93fe12a..c2d9de9 100644
--- a/arch/powerpc/boot/dts/mpc5121ads.dts
+++ b/arch/powerpc/boot/dts/mpc5121ads.dts
@@ -210,6 +210,11 @@
 			interrupts = <9 0x8>;
 			interrupt-parent = < &ipic >;
 			fsl5200-clocking;
+
+			rtc@68 {
+				compatible = "stm,m41t80";
+				reg = <0x68>;
+			};
 		};
 
 		i2c@1720 {
-- 
1.6.0.6

  parent reply	other threads:[~2009-05-06 20:22 UTC|newest]

Thread overview: 87+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2009-05-06 20:15 [PATCH 00/16] Add support for MPC512x Wolfgang Denk
2009-05-06 20:15 ` [PATCH 01/12] fs_enet: Use defines to set driver tunables Wolfgang Denk
2009-05-06 20:35   ` Grant Likely
2009-05-06 22:02     ` Wolfgang Denk
2009-05-06 22:41       ` Grant Likely
2009-05-06 20:15 ` [PATCH 02/12] fs_enet: Add MPC5121 FEC support Wolfgang Denk
2009-05-06 20:33   ` Grant Likely
2009-05-06 21:08     ` Scott Wood
2009-05-06 22:01     ` Wolfgang Denk
2009-05-06 22:29       ` Grant Likely
2009-05-06 22:41         ` Wolfgang Denk
2009-05-07 14:09           ` Grant Likely
2009-05-08  2:02             ` John Rigby
2009-05-08  7:52               ` David Miller
2009-05-11  6:56                 ` David Jander
2009-05-07  8:14         ` David Jander
2009-05-07 13:05       ` Kumar Gala
2009-05-06 20:40   ` David Miller
2009-05-06 22:06     ` Wolfgang Denk
2009-05-06 20:41   ` Scott Wood
2009-05-06 22:09     ` Wolfgang Denk
2009-05-06 22:39       ` Grant Likely
2009-05-14 12:38         ` Piotr Zięcik
2009-05-14 14:00           ` Grant Likely
2009-05-18 22:17             ` Benjamin Herrenschmidt
2009-05-19 11:26               ` Piotr Zięcik
2009-05-19 21:56                 ` Benjamin Herrenschmidt
2009-05-21  8:34             ` Piotr Zięcik
2009-05-21 15:36               ` Grant Likely
2009-05-06 20:15 ` [PATCH 03/12] fs_enet: Add FEC TX Alignment workaround for MPC5121 Wolfgang Denk
2009-05-06 20:37   ` Grant Likely
2009-05-06 22:12     ` Wolfgang Denk
2009-05-06 22:42       ` Grant Likely
2009-05-08  2:36         ` John Rigby
2009-05-06 20:15 ` [PATCH 04/12] mpc5121: Added reset module registers representation Wolfgang Denk
2009-05-06 20:29   ` Scott Wood
2009-05-06 21:57     ` Wolfgang Denk
2009-05-06 20:39   ` Grant Likely
2009-05-06 22:14     ` Wolfgang Denk
2009-05-06 20:15 ` [PATCH 05/12] mpc5121ads: Added Reset Module node to DTS Wolfgang Denk
2009-05-06 20:40   ` Grant Likely
2009-05-06 22:16     ` Wolfgang Denk
2009-05-06 22:46       ` Grant Likely
2009-05-06 20:15 ` [PATCH 06/12] mpc5121: Added NAND Flash Controller driver Wolfgang Denk
2009-05-06 20:59   ` Grant Likely
2009-05-08  2:22     ` John Rigby
2009-05-08  3:07       ` Grant Likely
2009-05-07  8:08   ` David Jander
2009-05-08  3:30   ` John Rigby
2009-05-13  8:41     ` Piotr Zięcik
2009-05-06 20:15 ` [PATCH 07/12] mpc5121ads: Clean up and fix NAND description in mpc5121ads DTS Wolfgang Denk
2009-05-06 21:00   ` Grant Likely
2009-05-06 20:15 ` [PATCH 08/12] mpc5121: Added I2C support Wolfgang Denk
2009-05-06 21:01   ` Grant Likely
2009-05-06 22:19     ` Wolfgang Denk
2009-05-06 22:51       ` Grant Likely
2009-05-07  2:41         ` Grant Likely
2009-05-07  6:36           ` Wolfgang Grandegger
2009-05-18 13:57             ` Piotr Zięcik
2009-05-18 14:11               ` Grant Likely
2009-05-18 14:29               ` Wolfgang Grandegger
2009-05-19  7:47                 ` Piotr Zięcik
2009-05-19  8:10                   ` Wolfgang Grandegger
2009-05-08  2:12           ` John Rigby
2009-05-08  3:01             ` Grant Likely
2009-05-06 20:15 ` Wolfgang Denk [this message]
2009-05-06 21:02   ` [PATCH 09/12] mpc5121ads: Added I2C RTC node to mpc5121ads DTS Grant Likely
2009-05-07  6:45   ` Wolfgang Grandegger
2009-05-06 20:15 ` [PATCH 10/12] mpc5121: Add MPC5121 Real time clock driver Wolfgang Denk
2009-05-06 21:03   ` Grant Likely
2009-05-06 21:06   ` Wolfram Sang
2009-05-06 22:40     ` Grant Likely
2009-05-08  2:41       ` [rtc-linux] " John Rigby
2009-05-08 15:53         ` Grant Likely
2009-05-08 16:09           ` Alessandro Zummo
2009-05-08 19:18             ` Wolfgang Denk
2009-05-08 16:10           ` Alessandro Zummo
2009-05-06 20:15 ` [PATCH 11/12] mpc5121: Added MPC512x DMA driver Wolfgang Denk
2009-05-06 21:07   ` Grant Likely
2009-05-08  2:49     ` John Rigby
2009-05-19  1:37   ` Hongjun Chen
2009-05-19  8:03     ` Piotr Zięcik
2009-05-20  0:39       ` Hongjun Chen
2009-05-06 20:15 ` [PATCH 12/12] mpc5121: Added default config for MPC5121 Wolfgang Denk
2009-05-06 21:08   ` Grant Likely
2009-05-06 22:23     ` Wolfgang Denk
2009-05-06 22:48       ` Grant Likely

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1241640919-4650-10-git-send-email-wd@denx.de \
    --to=wd@denx.de \
    --cc=kosmo@semihalf.com \
    --cc=linuxppc-dev@ozlabs.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).