linuxppc-dev.lists.ozlabs.org archive mirror
 help / color / mirror / Atom feed
From: Subrata Modak <subrata@linux.vnet.ibm.com>
To: David Brownell <david-b@pacbell.net>
Cc: Sachin P Sant <sachinp@linux.vnet.ibm.com>,
	Randy Dunlap <randy.dunlap@oracle.com>,
	Arnd Bergmann <arnd@arndb.de>,
	Stephen Rothwell <sfr@canb.auug.org.au>,
	linux-usb@vger.kernel.org,
	Linux-Kernel <linux-kernel@vger.kernel.org>,
	Linuxppc-dev <Linuxppc-dev@ozlabs.org>,
	Linux-Next <linux-next@vger.kernel.org>,
	kernel@wantstofly.org
Subject: Re: [BUILD FAILURE 02/04] Next June 04:PPC64 randconfig [drivers/usb/host/ohci-hcd.o]
Date: Mon, 15 Jun 2009 12:21:18 +0530	[thread overview]
Message-ID: <1245048679.5239.8.camel@subratamodak.linux.ibm.com> (raw)
In-Reply-To: <1244799348.5234.13.camel@subratamodak.linux.ibm.com>

On Fri, 2009-06-12 at 15:05 +0530, Subrata Modak wrote: 
> On Tue, 2009-06-09 at 17:38 -0700, David Brownell wrote:
> > On Friday 05 June 2009, Subrata Modak wrote:
> > > Correct, it fixes the issue. However, since few changes might have gone
> > > to the Kconfig, the patch does not apply cleanly. Below is the patch, just
> > > a retake of the earlier one, but on the latest code. 
> > 
> > And it got mangled a bit along the way.  Plus, the original one
> > goofed up Kconfig dependency displays ... both issues fixed in
> > this version, against current mainline GIT.
> > 
> > If someone can verify all four PPC/OF/OHCI configs build on
> > on PPC64, I'm OK with it.
> > 
> > - Dave
> 
> Dave,
> 
> Sorry for being late. The patch fixes the issue on the latest git for
> PPC64. Infact, the whole drivers/usb/host/ builds just fine:
> 
> linux-2.6 # make drivers/usb/host/
>   CHK     include/linux/version.h
>   CHK     include/linux/utsrelease.h
>   SYMLINK include/asm -> include/asm-powerpc
>   CALL    scripts/checksyscalls.sh
>   CC      drivers/usb/host/ohci-hcd.o
>   CC      drivers/usb/host/pci-quirks.o
>   CC      drivers/usb/host/uhci-hcd.o
>   LD      drivers/usb/host/built-in.o
>   CC [M]  drivers/usb/host/isp116x-hcd.o
>   CC [M]  drivers/usb/host/u132-hcd.o
> 
> You can check in the patch now.

Dave,

Have you checked in this patch ? Or, does it require some more
modification/updates from somebody´s side ?

Regards--
Subrata

> 
> Regards--
> Subrata
> 
> > 
> > 
> > ========== CUT HERE
> > From: Arnd Bergmann <arnd@arndb.de>
> > Subject: fix build failure for PPC64 randconfig [usb/ohci]
> > 
> > We could just make the USB_OHCI_HCD_PPC_OF option implicit
> > and selected only if at least one of USB_OHCI_HCD_PPC_OF_BE
> > and USB_OHCI_HCD_PPC_OF_LE are set.
> > 
> > [ dbrownell@users.sourceforge.net: fix patch manglation and dependencies ]
> > 
> > Signed-off-by: Arnd Bergmann <arnd@arndb.de>
> > Resent-by: Subrata Modak <subrata@linux.vnet.ibm.com>
> > Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
> > ---
> >  drivers/usb/host/Kconfig |   29 +++++++++++++++--------------
> >  1 file changed, 15 insertions(+), 14 deletions(-)
> > 
> > --- a/drivers/usb/host/Kconfig
> > +++ b/drivers/usb/host/Kconfig
> > @@ -180,26 +180,27 @@ config USB_OHCI_HCD_PPC_SOC
> >  	  Enables support for the USB controller on the MPC52xx or
> >  	  STB03xxx processor chip.  If unsure, say Y.
> > 
> > -config USB_OHCI_HCD_PPC_OF
> > -	bool "OHCI support for PPC USB controller on OF platform bus"
> > -	depends on USB_OHCI_HCD && PPC_OF
> > -	default y
> > -	---help---
> > -	  Enables support for the USB controller PowerPC present on the
> > -	  OpenFirmware platform bus.
> > -
> >  config USB_OHCI_HCD_PPC_OF_BE
> > -	bool "Support big endian HC"
> > -	depends on USB_OHCI_HCD_PPC_OF
> > -	default y
> > +	bool "OHCI support for OF platform bus (big endian)"
> > +	depends on USB_OHCI_HCD && PPC_OF
> >  	select USB_OHCI_BIG_ENDIAN_DESC
> >  	select USB_OHCI_BIG_ENDIAN_MMIO
> > +	---help---
> > +	  Enables support for big-endian USB controllers present on the
> > +	  OpenFirmware platform bus.
> > 
> >  config USB_OHCI_HCD_PPC_OF_LE
> > -	bool "Support little endian HC"
> > -	depends on USB_OHCI_HCD_PPC_OF
> > -	default n
> > +	bool "OHCI support for OF platform bus (little endian)"
> > +	depends on USB_OHCI_HCD && PPC_OF
> >  	select USB_OHCI_LITTLE_ENDIAN
> > +	---help---
> > +	  Enables support for little-endian USB controllers present on the
> > +	  OpenFirmware platform bus.
> > +
> > +config USB_OHCI_HCD_PPC_OF
> > +	bool
> > +	depends on USB_OHCI_HCD && PPC_OF
> > +	default USB_OHCI_HCD_PPC_OF_BE || USB_OHCI_HCD_PPC_OF_LE
> > 
> >  config USB_OHCI_HCD_PCI
> >  	bool "OHCI support for PCI-bus USB controllers"
> > 

  reply	other threads:[~2009-06-15  6:51 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2009-06-05 18:26 [BUILD FAILURE 02/04] Next June 04:PPC64 randconfig [drivers/usb/host/ohci-hcd.o] Subrata Modak
2009-06-09 18:36 ` Subrata Modak
2009-06-10  0:38 ` David Brownell
2009-06-12  9:35   ` Subrata Modak
2009-06-15  6:51     ` Subrata Modak [this message]
2009-06-17 12:53       ` Subrata Modak
2009-06-17 18:15         ` Grant Likely
2009-06-17 20:06           ` Grant Likely
  -- strict thread matches above, loose matches on Subject: below --
2009-06-04 13:31 Subrata Modak
2009-06-04 14:07 ` Jon Smirl

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1245048679.5239.8.camel@subratamodak.linux.ibm.com \
    --to=subrata@linux.vnet.ibm.com \
    --cc=Linuxppc-dev@ozlabs.org \
    --cc=arnd@arndb.de \
    --cc=david-b@pacbell.net \
    --cc=kernel@wantstofly.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-next@vger.kernel.org \
    --cc=linux-usb@vger.kernel.org \
    --cc=randy.dunlap@oracle.com \
    --cc=sachinp@linux.vnet.ibm.com \
    --cc=sfr@canb.auug.org.au \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).