linuxppc-dev.lists.ozlabs.org archive mirror
 help / color / mirror / Atom feed
From: Wolfgang Denk <wd@denx.de>
To: linuxppc-dev@ozlabs.org
Cc: netdev@vger.kernel.org, Wolfgang Denk <wd@denx.de>
Subject: [PATCH 1/2 v3] fs_enet/mii-fec.c: fix MII speed calculation
Date: Wed, 15 Jul 2009 17:18:52 +0200	[thread overview]
Message-ID: <1247671133-12148-1-git-send-email-wd@denx.de> (raw)
In-Reply-To: <1247578966-9847-1-git-send-email-wd@denx.de>

The MII speed calculation was based on the CPU clock (ppc_proc_freq),
but for MPC512x we must use the bus clock instead.

This patch makes it use the correct clock and makes sure we don't
clobber reserved bits in the MII_SPEED register.

Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: Kumar Gala <galak@kernel.crashing.org>
Cc: <netdev@vger.kernel.org>
---
Please ignore patch v2, it's crap.
Hope this is a bit better.

 arch/powerpc/include/asm/mpc5xxx.h   |   10 +++++++++
 arch/powerpc/sysdev/mpc5xxx_clocks.c |   37 ++++++++++++++++++++++++++++++++++
 drivers/net/fs_enet/mii-fec.c        |   13 +++++++++--
 3 files changed, 57 insertions(+), 3 deletions(-)

diff --git a/arch/powerpc/include/asm/mpc5xxx.h b/arch/powerpc/include/asm/mpc5xxx.h
index 5ce9c5f..86ab29f 100644
--- a/arch/powerpc/include/asm/mpc5xxx.h
+++ b/arch/powerpc/include/asm/mpc5xxx.h
@@ -15,8 +15,18 @@
 
 #ifndef __ASM_POWERPC_MPC5xxx_H__
 #define __ASM_POWERPC_MPC5xxx_H__
+#include <linux/of_platform.h>
 
 extern unsigned long mpc5xxx_get_bus_frequency(struct device_node *node);
 
+#if defined(CONFIG_PPC_MPC512x) || defined(CONFIG_PPC_MPC52xx)
+extern int mpc5xxx_get_mii_speed(struct of_device *ofdev);
+#else
+static inline int mpc5xxx_get_mii_speed(struct of_device *ofdev)
+{
+	return -1;
+}
+#endif
+
 #endif /* __ASM_POWERPC_MPC5xxx_H__ */
 
diff --git a/arch/powerpc/sysdev/mpc5xxx_clocks.c b/arch/powerpc/sysdev/mpc5xxx_clocks.c
index 34e12f9..e26d12b 100644
--- a/arch/powerpc/sysdev/mpc5xxx_clocks.c
+++ b/arch/powerpc/sysdev/mpc5xxx_clocks.c
@@ -31,3 +31,40 @@ mpc5xxx_get_bus_frequency(struct device_node *node)
 	return p_bus_freq ? *p_bus_freq : 0;
 }
 EXPORT_SYMBOL(mpc5xxx_get_bus_frequency);
+
+/**
+ *	mpc5xxx_get_mii_speed - Get the MII_SPEED value
+ *	@node:	device node
+ *
+ *	Returns the MII_SPEED value for MPC512x and MPC52xx systems.
+ *	The value gets computed such that the resulting MDC frequency
+ *	is 2.5 MHz or lower.
+ */
+
+int
+mpc5xxx_get_mii_speed(struct of_device *ofdev)
+{
+	unsigned int clock, speed;
+
+	clock = mpc5xxx_get_bus_frequency(ofdev->node);
+
+	if (!clock) {
+		dev_err(&ofdev->dev, "could not determine IPS/IPB clock\n");
+		return -ENODEV;
+	}
+
+	/* scale for a MII clock <= 2.5 MHz */
+	speed = (clock + 2499999) / 2500000;
+
+	/* only 6 bits available for MII speed */
+	if (speed > 0x3F) {
+		speed = 0x3F;
+		dev_err(&ofdev->dev,
+			"MII clock (%d MHz) exceeds max (2.5 MHz)\n",
+			clock / speed);
+	}
+
+	/* Field is in bits 25:30 of MII_SPEED register */
+	return speed << 1;
+}
+EXPORT_SYMBOL(mpc5xxx_get_mii_speed);
diff --git a/drivers/net/fs_enet/mii-fec.c b/drivers/net/fs_enet/mii-fec.c
index 75a0999..a28d39f 100644
--- a/drivers/net/fs_enet/mii-fec.c
+++ b/drivers/net/fs_enet/mii-fec.c
@@ -36,6 +36,7 @@
 #include <asm/pgtable.h>
 #include <asm/irq.h>
 #include <asm/uaccess.h>
+#include <asm/mpc5xxx.h>
 
 #include "fs_enet.h"
 #include "fec.h"
@@ -103,7 +104,6 @@ static int fs_enet_fec_mii_reset(struct mii_bus *bus)
 static int __devinit fs_enet_mdio_probe(struct of_device *ofdev,
                                         const struct of_device_id *match)
 {
-	struct device_node *np = NULL;
 	struct resource res;
 	struct mii_bus *new_bus;
 	struct fec_info *fec;
@@ -133,13 +133,20 @@ static int __devinit fs_enet_mdio_probe(struct of_device *ofdev,
 	if (!fec->fecp)
 		goto out_fec;
 
-	fec->mii_speed = ((ppc_proc_freq + 4999999) / 5000000) << 1;
+	if (of_device_is_compatible(ofdev->node, "fsl,mpc5121-fec-mdio")) {
+		i = mpc5xxx_get_mii_speed(ofdev);
+		if (i < 0)
+			goto out_unmap_regs;
+		fec->mii_speed = i;
+	} else {
+		fec->mii_speed = ((ppc_proc_freq + 4999999) / 5000000) << 1;
+	}
 
 	setbits32(&fec->fecp->fec_r_cntrl, FEC_RCNTRL_MII_MODE);
 	setbits32(&fec->fecp->fec_ecntrl, FEC_ECNTRL_PINMUX |
 	                                  FEC_ECNTRL_ETHER_EN);
 	out_be32(&fec->fecp->fec_ievent, FEC_ENET_MII);
-	out_be32(&fec->fecp->fec_mii_speed, fec->mii_speed);
+	clrsetbits_be32(&fec->fecp->fec_mii_speed, 0x7E, fec->mii_speed);
 
 	new_bus->phy_mask = ~0;
 	new_bus->irq = kmalloc(sizeof(int) * PHY_MAX_ADDR, GFP_KERNEL);
-- 
1.6.0.6

  reply	other threads:[~2009-07-15 15:19 UTC|newest]

Thread overview: 54+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2009-05-06 20:20 [PATCH 00/04] Add support for ARIA board Wolfgang Denk
2009-05-06 20:20 ` [PATCH 01/04] mpc5121: prepare support for additional boards Wolfgang Denk
2009-05-06 20:29   ` Grant Likely
2009-05-06 20:40     ` Wolfgang Denk
2009-05-06 21:11       ` Grant Likely
2009-05-06 20:20 ` [PATCH 02/04] ARIA: add device tree source file Wolfgang Denk
2009-05-06 20:21 ` [PATCH 03/04] mpc5121: add support for ARIA board Wolfgang Denk
2009-05-06 20:21 ` [PATCH 04/04] ARIA: add default config file Wolfgang Denk
2009-05-06 20:21 ` [PATCH 05/04] *** NOT FOR RELEASE *** HACK *** Work around MII clock issue *** Wolfgang Denk
2009-05-07  8:26   ` Joakim Tjernlund
2009-05-07  9:19     ` Wolfgang Denk
2009-05-07  9:30       ` Joakim Tjernlund
2009-05-08  2:09   ` John Rigby
2009-06-06 22:16     ` Wolfgang Denk
2009-06-06 22:27       ` John Rigby
2009-06-06 23:21         ` Wolfgang Denk
2009-06-07  0:08           ` John Rigby
2009-06-07  8:20             ` Wolfram Sang
2009-06-07 20:34             ` Wolfgang Denk
2009-06-08  7:46               ` Wolfgang Grandegger
2009-06-08  8:19                 ` Wolfgang Denk
2009-06-08 14:39                   ` Grant Likely
2009-06-08 14:37               ` Grant Likely
2009-06-11 20:19                 ` [PATCH] mpc5xxx_get_bus_frequency(): use common code on MPC512x and MPC52xx Wolfgang Denk
2009-06-17  6:14                   ` Grant Likely
2009-06-17  6:21                     ` Grant Likely
2009-06-11 20:19                 ` [PATCH RFC] fs_enet/mii-fec.c: fix MII speed calculation Wolfgang Denk
2009-07-14 13:42                   ` [PATCH v2] " Wolfgang Denk
2009-07-15 15:18                     ` Wolfgang Denk [this message]
2009-07-15 17:17                       ` [PATCH 1/2 v3] " Grant Likely
2009-07-16 21:21                         ` Wolfgang Denk
2009-07-16 22:37                           ` Grant Likely
2009-07-16 21:42                       ` [PATCH 1/2 v4] " Wolfgang Denk
2009-07-16 22:44                         ` Grant Likely
2009-07-17 12:24                           ` Wolfgang Denk
2009-07-17  9:33                         ` Wolfram Sang
2009-07-17 12:32                           ` Wolfgang Denk
2009-07-17 12:27                         ` [PATCH 1/2 v5] " Wolfgang Denk
2009-07-17 14:41                           ` Grant Likely
2009-07-17 16:21                             ` David Miller
2009-07-17 16:48                             ` David Miller
2009-07-17 12:27                         ` [PATCH 2/2 v3] MPC52xx FEC: be more conservative when setting MII_SPEED register Wolfgang Denk
2009-07-17 12:59                           ` [PATCH 2/2 v4] " Wolfgang Denk
2009-07-17 14:45                             ` Grant Likely
2009-07-17 17:51                               ` Wolfgang Denk
2009-07-17 18:31                                 ` Grant Likely
2009-07-16 21:42                       ` [PATCH 2/2 v2] " Wolfgang Denk
2009-07-16 22:48                         ` Grant Likely
2009-07-17 12:25                           ` Wolfgang Denk
2009-07-17  9:47                         ` Wolfram Sang
2009-07-17 12:35                           ` Wolfgang Denk
2009-07-15 15:18                     ` [PATCH 2/2] " Wolfgang Denk
2009-07-15 17:18                       ` Grant Likely
2009-07-16 21:21                         ` Wolfgang Denk

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1247671133-12148-1-git-send-email-wd@denx.de \
    --to=wd@denx.de \
    --cc=linuxppc-dev@ozlabs.org \
    --cc=netdev@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).