Removing deprecated drivers from drivers/i2c/chips

Removing deprecated drivers from drivers/i2c/chips

[Wolfram Sang]

Hi,

continuing the quest to clean up and ultimately remove the drivers/i2c/chips
directory, this patch series removes three drivers for GPIO-expanders which are
obsoleted and marked as deprecated for more than a year. The newer (and better)
drivers can be found in drivers/gpio.

As it is ensured that the newer drivers cover the same i2c_device_ids, all
platform_devices will still match. Some defconfig updates may be necessary
though, but according to [1] this is left to the arch|platform-maintainers
(also as most defconfigs are quite outdated). For that reason, I put the
relevant arch-mailing-lists to Cc. Comments are welcome.

Regards,

   Wolfram

[1] http://lkml.org/lkml/2009/5/7/34

[PATCH 1/4] gpio/pcf857x: copy i2c_device_id from old pcf8574-driver

[Wolfram Sang]

The deprecated pcf8574 driver is going to be removed. Make sure this
replacement-driver inherits all i2c_device_ids for a smooth transition.

Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Cc: David Brownell <dbrownell@users.sourceforge.net>
Cc: Jean Delvare <khali@linux-fr.org>
---
 drivers/gpio/pcf857x.c |    1 +
 1 files changed, 1 insertions(+), 0 deletions(-)

diff --git a/drivers/gpio/pcf857x.c b/drivers/gpio/pcf857x.c
index 9525724..3f1ec1e 100644
--- a/drivers/gpio/pcf857x.c
+++ b/drivers/gpio/pcf857x.c
@@ -28,6 +28,7 @@
 
 static const struct i2c_device_id pcf857x_id[] = {
 	{ "pcf8574", 8 },
+	{ "pcf8574a", 8 },
 	{ "pca8574", 8 },
 	{ "pca9670", 8 },
 	{ "pca9672", 8 },
-- 
1.6.3.3

[PATCH 2/4] i2c/chips: Remove deprecated pcf8575-driver

[Wolfram Sang]

The pcf8575-driver in drivers/i2c/chips which just exports its register to
sysfs is superseeded by drivers/gpio/pcf857x.c which properly uses the gpiolib.
As this driver has been deprecated for more than a year, finally remove it.

Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Cc: Bart Van Assche <bart.vanassche@gmail.com>
Cc: Jean Delvare <khali@linux-fr.org>
---
 Documentation/i2c/chips/pcf8575 |   69 --------------
 drivers/i2c/chips/Kconfig       |   18 ----
 drivers/i2c/chips/Makefile      |    1 -
 drivers/i2c/chips/pcf8575.c     |  198 ---------------------------------------
 4 files changed, 0 insertions(+), 286 deletions(-)
 delete mode 100644 Documentation/i2c/chips/pcf8575
 delete mode 100644 drivers/i2c/chips/pcf8575.c

diff --git a/Documentation/i2c/chips/pcf8575 b/Documentation/i2c/chips/pcf8575
deleted file mode 100644
index 40b268e..0000000
--- a/Documentation/i2c/chips/pcf8575
+++ /dev/null
@@ -1,69 +0,0 @@
-About the PCF8575 chip and the pcf8575 kernel driver
-====================================================
-
-The PCF8575 chip is produced by the following manufacturers:
-
-  * Philips NXP
-    http://www.nxp.com/#/pip/cb=[type=product,path=50807/41735/41850,final=PCF8575_3]|pip=[pip=PCF8575_3][0]
-
-  * Texas Instruments
-    http://focus.ti.com/docs/prod/folders/print/pcf8575.html
-
-
-Some vendors sell small PCB's with the PCF8575 mounted on it. You can connect
-such a board to a Linux host via e.g. an USB to I2C interface. Examples of
-PCB boards with a PCF8575:
-
-  * SFE Breakout Board for PCF8575 I2C Expander by RobotShop
-    http://www.robotshop.ca/home/products/robot-parts/electronics/adapters-converters/sfe-pcf8575-i2c-expander-board.html
-
-  * Breakout Board for PCF8575 I2C Expander by Spark Fun Electronics
-    http://www.sparkfun.com/commerce/product_info.php?products_id=8130
-
-
-Description
------------
-The PCF8575 chip is a 16-bit I/O expander for the I2C bus. Up to eight of
-these chips can be connected to the same I2C bus. You can find this
-chip on some custom designed hardware, but you won't find it on PC
-motherboards.
-
-The PCF8575 chip consists of a 16-bit quasi-bidirectional port and an I2C-bus
-interface. Each of the sixteen I/O's can be independently used as an input or
-an output. To set up an I/O pin as an input, you have to write a 1 to the
-corresponding output.
-
-For more information please see the datasheet.
-
-
-Detection
----------
-
-There is no method known to detect whether a chip on a given I2C address is
-a PCF8575 or whether it is any other I2C device, so you have to pass the I2C
-bus and address of the installed PCF8575 devices explicitly to the driver at
-load time via the force=... parameter.
-
-/sys interface
---------------
-
-For each address on which a PCF8575 chip was found or forced the following
-files will be created under /sys:
-* /sys/bus/i2c/devices/<bus>-<address>/read
-* /sys/bus/i2c/devices/<bus>-<address>/write
-where bus is the I2C bus number (0, 1, ...) and address is the four-digit
-hexadecimal representation of the 7-bit I2C address of the PCF8575
-(0020 .. 0027).
-
-The read file is read-only. Reading it will trigger an I2C read and will hence
-report the current input state for the pins configured as inputs, and the
-current output value for the pins configured as outputs.
-
-The write file is read-write. Writing a value to it will configure all pins
-as output for which the corresponding bit is zero. Reading the write file will
-return the value last written, or -EAGAIN if no value has yet been written to
-the write file.
-
-On module initialization the configuration of the chip is not changed -- the
-chip is left in the state it was already configured in through either power-up
-or through previous I2C write actions.
diff --git a/drivers/i2c/chips/Kconfig b/drivers/i2c/chips/Kconfig
index 02d746c..1b5455e 100644
--- a/drivers/i2c/chips/Kconfig
+++ b/drivers/i2c/chips/Kconfig
@@ -33,24 +33,6 @@ config SENSORS_PCF8574
 	  These devices are hard to detect and rarely found on mainstream
 	  hardware.  If unsure, say N.
 
-config PCF8575
-	tristate "Philips PCF8575 (DEPRECATED)"
-	default n
-	depends on GPIO_PCF857X = "n"
-	help
-	  If you say yes here you get support for Philips PCF8575 chip.
-	  This chip is a 16-bit I/O expander for the I2C bus.  Several other
-	  chip manufacturers sell equivalent chips, e.g. Texas Instruments.
-
-	  This driver can also be built as a module.  If so, the module
-	  will be called pcf8575.
-
-	  This driver is deprecated and will be dropped soon. Use
-	  drivers/gpio/pcf857x.c instead.
-
-	  This device is hard to detect and is rarely found on mainstream
-	  hardware.  If unsure, say N.
-
 config SENSORS_PCA9539
 	tristate "Philips PCA9539 16-bit I/O port (DEPRECATED)"
 	depends on EXPERIMENTAL && GPIO_PCA953X = "n"
diff --git a/drivers/i2c/chips/Makefile b/drivers/i2c/chips/Makefile
index f4680d1..fceb377 100644
--- a/drivers/i2c/chips/Makefile
+++ b/drivers/i2c/chips/Makefile
@@ -13,7 +13,6 @@
 obj-$(CONFIG_DS1682)		+= ds1682.o
 obj-$(CONFIG_SENSORS_PCA9539)	+= pca9539.o
 obj-$(CONFIG_SENSORS_PCF8574)	+= pcf8574.o
-obj-$(CONFIG_PCF8575)		+= pcf8575.o
 obj-$(CONFIG_SENSORS_TSL2550)	+= tsl2550.o
 
 ifeq ($(CONFIG_I2C_DEBUG_CHIP),y)
diff --git a/drivers/i2c/chips/pcf8575.c b/drivers/i2c/chips/pcf8575.c
deleted file mode 100644
index 07fd7cb..0000000
--- a/drivers/i2c/chips/pcf8575.c
+++ /dev/null
@@ -1,198 +0,0 @@
-/*
-  pcf8575.c
-
-  About the PCF8575 chip: the PCF8575 is a 16-bit I/O expander for the I2C bus
-  produced by a.o. Philips Semiconductors.
-
-  Copyright (C) 2006 Michael Hennerich, Analog Devices Inc.
-  <hennerich@blackfin.uclinux.org>
-  Based on pcf8574.c.
-
-  Copyright (c) 2007 Bart Van Assche <bart.vanassche@gmail.com>.
-  Ported this driver from ucLinux to the mainstream Linux kernel.
-
-  This program is free software; you can redistribute it and/or modify
-  it under the terms of the GNU General Public License as published by
-  the Free Software Foundation; either version 2 of the License, or
-  (at your option) any later version.
-
-  This program is distributed in the hope that it will be useful,
-  but WITHOUT ANY WARRANTY; without even the implied warranty of
-  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-  GNU General Public License for more details.
-
-  You should have received a copy of the GNU General Public License
-  along with this program; if not, write to the Free Software
-  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-*/
-
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/i2c.h>
-#include <linux/slab.h>  /* kzalloc() */
-#include <linux/sysfs.h> /* sysfs_create_group() */
-
-/* Addresses to scan: none, device can't be detected */
-static const unsigned short normal_i2c[] = { I2C_CLIENT_END };
-
-/* Insmod parameters */
-I2C_CLIENT_INSMOD;
-
-
-/* Each client has this additional data */
-struct pcf8575_data {
-	int write;		/* last written value, or error code */
-};
-
-/* following are the sysfs callback functions */
-static ssize_t show_read(struct device *dev, struct device_attribute *attr,
-			 char *buf)
-{
-	struct i2c_client *client = to_i2c_client(dev);
-	u16 val;
-	u8 iopin_state[2];
-
-	i2c_master_recv(client, iopin_state, 2);
-
-	val = iopin_state[0];
-	val |= iopin_state[1] << 8;
-
-	return sprintf(buf, "%u\n", val);
-}
-
-static DEVICE_ATTR(read, S_IRUGO, show_read, NULL);
-
-static ssize_t show_write(struct device *dev, struct device_attribute *attr,
-			  char *buf)
-{
-	struct pcf8575_data *data = dev_get_drvdata(dev);
-	if (data->write < 0)
-		return data->write;
-	return sprintf(buf, "%d\n", data->write);
-}
-
-static ssize_t set_write(struct device *dev, struct device_attribute *attr,
-			 const char *buf, size_t count)
-{
-	struct i2c_client *client = to_i2c_client(dev);
-	struct pcf8575_data *data = i2c_get_clientdata(client);
-	unsigned long val = simple_strtoul(buf, NULL, 10);
-	u8 iopin_state[2];
-
-	if (val > 0xffff)
-		return -EINVAL;
-
-	data->write = val;
-
-	iopin_state[0] = val & 0xFF;
-	iopin_state[1] = val >> 8;
-
-	i2c_master_send(client, iopin_state, 2);
-
-	return count;
-}
-
-static DEVICE_ATTR(write, S_IWUSR | S_IRUGO, show_write, set_write);
-
-static struct attribute *pcf8575_attributes[] = {
-	&dev_attr_read.attr,
-	&dev_attr_write.attr,
-	NULL
-};
-
-static const struct attribute_group pcf8575_attr_group = {
-	.attrs = pcf8575_attributes,
-};
-
-/*
- * Real code
- */
-
-/* Return 0 if detection is successful, -ENODEV otherwise */
-static int pcf8575_detect(struct i2c_client *client, int kind,
-			  struct i2c_board_info *info)
-{
-	struct i2c_adapter *adapter = client->adapter;
-
-	if (!i2c_check_functionality(adapter, I2C_FUNC_I2C))
-		return -ENODEV;
-
-	/* This is the place to detect whether the chip at the specified
-	   address really is a PCF8575 chip. However, there is no method known
-	   to detect whether an I2C chip is a PCF8575 or any other I2C chip. */
-
-	strlcpy(info->type, "pcf8575", I2C_NAME_SIZE);
-
-	return 0;
-}
-
-static int pcf8575_probe(struct i2c_client *client,
-			 const struct i2c_device_id *id)
-{
-	struct pcf8575_data *data;
-	int err;
-
-	data = kzalloc(sizeof(struct pcf8575_data), GFP_KERNEL);
-	if (!data) {
-		err = -ENOMEM;
-		goto exit;
-	}
-
-	i2c_set_clientdata(client, data);
-	data->write = -EAGAIN;
-
-	/* Register sysfs hooks */
-	err = sysfs_create_group(&client->dev.kobj, &pcf8575_attr_group);
-	if (err)
-		goto exit_free;
-
-	return 0;
-
-exit_free:
-	kfree(data);
-exit:
-	return err;
-}
-
-static int pcf8575_remove(struct i2c_client *client)
-{
-	sysfs_remove_group(&client->dev.kobj, &pcf8575_attr_group);
-	kfree(i2c_get_clientdata(client));
-	return 0;
-}
-
-static const struct i2c_device_id pcf8575_id[] = {
-	{ "pcf8575", 0 },
-	{ }
-};
-
-static struct i2c_driver pcf8575_driver = {
-	.driver = {
-		.owner	= THIS_MODULE,
-		.name	= "pcf8575",
-	},
-	.probe		= pcf8575_probe,
-	.remove		= pcf8575_remove,
-	.id_table	= pcf8575_id,
-
-	.detect		= pcf8575_detect,
-	.address_data	= &addr_data,
-};
-
-static int __init pcf8575_init(void)
-{
-	return i2c_add_driver(&pcf8575_driver);
-}
-
-static void __exit pcf8575_exit(void)
-{
-	i2c_del_driver(&pcf8575_driver);
-}
-
-MODULE_AUTHOR("Michael Hennerich <hennerich@blackfin.uclinux.org>, "
-	      "Bart Van Assche <bart.vanassche@gmail.com>");
-MODULE_DESCRIPTION("pcf8575 driver");
-MODULE_LICENSE("GPL");
-
-module_init(pcf8575_init);
-module_exit(pcf8575_exit);
-- 
1.6.3.3

[PATCH 3/4] i2c/chips: Remove deprecated pca9539-driver

[Wolfram Sang]

The pca9539-driver in drivers/i2c/chips which just exports its registers to
sysfs is superseeded by drivers/gpio/pca953x.c which properly uses the gpiolib.
As this driver has been deprecated for more than a year, finally remove it.

Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Cc: Ben Gardner <gardner.ben@gmail.com>
Cc: Jean Delvare <khali@linux-fr.org>
---
 Documentation/i2c/chips/pca9539 |   58 ---------------
 drivers/i2c/chips/Kconfig       |   13 ----
 drivers/i2c/chips/Makefile      |    1 -
 drivers/i2c/chips/pca9539.c     |  152 ---------------------------------------
 4 files changed, 0 insertions(+), 224 deletions(-)
 delete mode 100644 Documentation/i2c/chips/pca9539
 delete mode 100644 drivers/i2c/chips/pca9539.c

diff --git a/Documentation/i2c/chips/pca9539 b/Documentation/i2c/chips/pca9539
deleted file mode 100644
index 6aff890..0000000
--- a/Documentation/i2c/chips/pca9539
+++ /dev/null
@@ -1,58 +0,0 @@
-Kernel driver pca9539
-=====================
-
-NOTE: this driver is deprecated and will be dropped soon, use
-drivers/gpio/pca9539.c instead.
-
-Supported chips:
-  * Philips PCA9539
-    Prefix: 'pca9539'
-    Addresses scanned: none
-    Datasheet:
-        http://www.semiconductors.philips.com/acrobat/datasheets/PCA9539_2.pdf
-
-Author: Ben Gardner <bgardner@wabtec.com>
-
-
-Description
------------
-
-The Philips PCA9539 is a 16 bit low power I/O device.
-All 16 lines can be individually configured as an input or output.
-The input sense can also be inverted.
-The 16 lines are split between two bytes.
-
-
-Detection
----------
-
-The PCA9539 is difficult to detect and not commonly found in PC machines,
-so you have to pass the I2C bus and address of the installed PCA9539
-devices explicitly to the driver at load time via the force=... parameter.
-
-
-Sysfs entries
--------------
-
-Each is a byte that maps to the 8 I/O bits.
-A '0' suffix is for bits 0-7, while '1' is for bits 8-15.
-
-input[01]     - read the current value
-output[01]    - sets the output value
-direction[01] - direction of each bit: 1=input, 0=output
-invert[01]    - toggle the input bit sense
-
-input reads the actual state of the line and is always available.
-The direction defaults to input for all channels.
-
-
-General Remarks
----------------
-
-Note that each output, direction, and invert entry controls 8 lines.
-You should use the read, modify, write sequence.
-For example. to set output bit 0 of 1.
-  val=$(cat output0)
-  val=$(( $val | 1 ))
-  echo $val > output0
-
diff --git a/drivers/i2c/chips/Kconfig b/drivers/i2c/chips/Kconfig
index 1b5455e..8cd1a7f 100644
--- a/drivers/i2c/chips/Kconfig
+++ b/drivers/i2c/chips/Kconfig
@@ -33,19 +33,6 @@ config SENSORS_PCF8574
 	  These devices are hard to detect and rarely found on mainstream
 	  hardware.  If unsure, say N.
 
-config SENSORS_PCA9539
-	tristate "Philips PCA9539 16-bit I/O port (DEPRECATED)"
-	depends on EXPERIMENTAL && GPIO_PCA953X = "n"
-	help
-	  If you say yes here you get support for the Philips PCA9539
-	  16-bit I/O port.
-
-	  This driver can also be built as a module.  If so, the module
-	  will be called pca9539.
-
-	  This driver is deprecated and will be dropped soon. Use
-	  drivers/gpio/pca953x.c instead.
-
 config SENSORS_TSL2550
 	tristate "Taos TSL2550 ambient light sensor"
 	depends on EXPERIMENTAL
diff --git a/drivers/i2c/chips/Makefile b/drivers/i2c/chips/Makefile
index fceb377..8cd778d 100644
--- a/drivers/i2c/chips/Makefile
+++ b/drivers/i2c/chips/Makefile
@@ -11,7 +11,6 @@
 #
 
 obj-$(CONFIG_DS1682)		+= ds1682.o
-obj-$(CONFIG_SENSORS_PCA9539)	+= pca9539.o
 obj-$(CONFIG_SENSORS_PCF8574)	+= pcf8574.o
 obj-$(CONFIG_SENSORS_TSL2550)	+= tsl2550.o
 
diff --git a/drivers/i2c/chips/pca9539.c b/drivers/i2c/chips/pca9539.c
deleted file mode 100644
index 270de4e..0000000
--- a/drivers/i2c/chips/pca9539.c
+++ /dev/null
@@ -1,152 +0,0 @@
-/*
-    pca9539.c - 16-bit I/O port with interrupt and reset
-
-    Copyright (C) 2005 Ben Gardner <bgardner@wabtec.com>
-
-    This program is free software; you can redistribute it and/or modify
-    it under the terms of the GNU General Public License as published by
-    the Free Software Foundation; version 2 of the License.
-*/
-
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/slab.h>
-#include <linux/i2c.h>
-#include <linux/hwmon-sysfs.h>
-
-/* Addresses to scan: none, device is not autodetected */
-static const unsigned short normal_i2c[] = { I2C_CLIENT_END };
-
-/* Insmod parameters */
-I2C_CLIENT_INSMOD_1(pca9539);
-
-enum pca9539_cmd
-{
-	PCA9539_INPUT_0		= 0,
-	PCA9539_INPUT_1		= 1,
-	PCA9539_OUTPUT_0	= 2,
-	PCA9539_OUTPUT_1	= 3,
-	PCA9539_INVERT_0	= 4,
-	PCA9539_INVERT_1	= 5,
-	PCA9539_DIRECTION_0	= 6,
-	PCA9539_DIRECTION_1	= 7,
-};
-
-/* following are the sysfs callback functions */
-static ssize_t pca9539_show(struct device *dev, struct device_attribute *attr,
-			    char *buf)
-{
-	struct sensor_device_attribute *psa = to_sensor_dev_attr(attr);
-	struct i2c_client *client = to_i2c_client(dev);
-	return sprintf(buf, "%d\n", i2c_smbus_read_byte_data(client,
-							     psa->index));
-}
-
-static ssize_t pca9539_store(struct device *dev, struct device_attribute *attr,
-			     const char *buf, size_t count)
-{
-	struct sensor_device_attribute *psa = to_sensor_dev_attr(attr);
-	struct i2c_client *client = to_i2c_client(dev);
-	unsigned long val = simple_strtoul(buf, NULL, 0);
-	if (val > 0xff)
-		return -EINVAL;
-	i2c_smbus_write_byte_data(client, psa->index, val);
-	return count;
-}
-
-/* Define the device attributes */
-
-#define PCA9539_ENTRY_RO(name, cmd_idx) \
-	static SENSOR_DEVICE_ATTR(name, S_IRUGO, pca9539_show, NULL, cmd_idx)
-
-#define PCA9539_ENTRY_RW(name, cmd_idx) \
-	static SENSOR_DEVICE_ATTR(name, S_IRUGO | S_IWUSR, pca9539_show, \
-				  pca9539_store, cmd_idx)
-
-PCA9539_ENTRY_RO(input0, PCA9539_INPUT_0);
-PCA9539_ENTRY_RO(input1, PCA9539_INPUT_1);
-PCA9539_ENTRY_RW(output0, PCA9539_OUTPUT_0);
-PCA9539_ENTRY_RW(output1, PCA9539_OUTPUT_1);
-PCA9539_ENTRY_RW(invert0, PCA9539_INVERT_0);
-PCA9539_ENTRY_RW(invert1, PCA9539_INVERT_1);
-PCA9539_ENTRY_RW(direction0, PCA9539_DIRECTION_0);
-PCA9539_ENTRY_RW(direction1, PCA9539_DIRECTION_1);
-
-static struct attribute *pca9539_attributes[] = {
-	&sensor_dev_attr_input0.dev_attr.attr,
-	&sensor_dev_attr_input1.dev_attr.attr,
-	&sensor_dev_attr_output0.dev_attr.attr,
-	&sensor_dev_attr_output1.dev_attr.attr,
-	&sensor_dev_attr_invert0.dev_attr.attr,
-	&sensor_dev_attr_invert1.dev_attr.attr,
-	&sensor_dev_attr_direction0.dev_attr.attr,
-	&sensor_dev_attr_direction1.dev_attr.attr,
-	NULL
-};
-
-static struct attribute_group pca9539_defattr_group = {
-	.attrs = pca9539_attributes,
-};
-
-/* Return 0 if detection is successful, -ENODEV otherwise */
-static int pca9539_detect(struct i2c_client *client, int kind,
-			  struct i2c_board_info *info)
-{
-	struct i2c_adapter *adapter = client->adapter;
-
-	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
-		return -ENODEV;
-
-	strlcpy(info->type, "pca9539", I2C_NAME_SIZE);
-
-	return 0;
-}
-
-static int pca9539_probe(struct i2c_client *client,
-			 const struct i2c_device_id *id)
-{
-	/* Register sysfs hooks */
-	return sysfs_create_group(&client->dev.kobj,
-				  &pca9539_defattr_group);
-}
-
-static int pca9539_remove(struct i2c_client *client)
-{
-	sysfs_remove_group(&client->dev.kobj, &pca9539_defattr_group);
-	return 0;
-}
-
-static const struct i2c_device_id pca9539_id[] = {
-	{ "pca9539", 0 },
-	{ }
-};
-
-static struct i2c_driver pca9539_driver = {
-	.driver = {
-		.name	= "pca9539",
-	},
-	.probe		= pca9539_probe,
-	.remove		= pca9539_remove,
-	.id_table	= pca9539_id,
-
-	.detect		= pca9539_detect,
-	.address_data	= &addr_data,
-};
-
-static int __init pca9539_init(void)
-{
-	return i2c_add_driver(&pca9539_driver);
-}
-
-static void __exit pca9539_exit(void)
-{
-	i2c_del_driver(&pca9539_driver);
-}
-
-MODULE_AUTHOR("Ben Gardner <bgardner@wabtec.com>");
-MODULE_DESCRIPTION("PCA9539 driver");
-MODULE_LICENSE("GPL");
-
-module_init(pca9539_init);
-module_exit(pca9539_exit);
-
-- 
1.6.3.3

[PATCH 4/4] i2c/chips: Remove deprecated pcf8574-driver

[Wolfram Sang]

The pcf8574-driver in drivers/i2c/chips which just exports its register to
sysfs is superseeded by drivers/gpio/pcf857x.c which properly uses the gpiolib.
As this driver has been deprecated for more than a year, finally remove it.

Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Cc: Jean Delvare <khali@linux-fr.org>
---
 Documentation/i2c/chips/pcf8574 |   65 ------------
 drivers/i2c/chips/Kconfig       |   17 ---
 drivers/i2c/chips/Makefile      |    1 -
 drivers/i2c/chips/pcf8574.c     |  215 ---------------------------------------
 4 files changed, 0 insertions(+), 298 deletions(-)
 delete mode 100644 Documentation/i2c/chips/pcf8574
 delete mode 100644 drivers/i2c/chips/pcf8574.c

diff --git a/Documentation/i2c/chips/pcf8574 b/Documentation/i2c/chips/pcf8574
deleted file mode 100644
index 235815c..0000000
--- a/Documentation/i2c/chips/pcf8574
+++ /dev/null
@@ -1,65 +0,0 @@
-Kernel driver pcf8574
-=====================
-
-Supported chips:
-  * Philips PCF8574
-    Prefix: 'pcf8574'
-    Addresses scanned: none
-    Datasheet: Publicly available at the Philips Semiconductors website
-               http://www.semiconductors.philips.com/pip/PCF8574P.html
-
- * Philips PCF8574A
-    Prefix: 'pcf8574a'
-    Addresses scanned: none
-    Datasheet: Publicly available at the Philips Semiconductors website
-               http://www.semiconductors.philips.com/pip/PCF8574P.html
-
-Authors:
-        Frodo Looijaard <frodol@dds.nl>,
-        Philip Edelbrock <phil@netroedge.com>,
-        Dan Eaton <dan.eaton@rocketlogix.com>,
-        Aurelien Jarno <aurelien@aurel32.net>,
-        Jean Delvare <khali@linux-fr.org>,
-
-
-Description
------------
-The PCF8574(A) is an 8-bit I/O expander for the I2C bus produced by Philips
-Semiconductors. It is designed to provide a byte I2C interface to up to 16
-separate devices (8 x PCF8574 and 8 x PCF8574A).
-
-This device consists of a quasi-bidirectional port. Each of the eight I/Os
-can be independently used as an input or output. To setup an I/O as an
-input, you have to write a 1 to the corresponding output.
-
-For more informations see the datasheet.
-
-
-Accessing PCF8574(A) via /sys interface
--------------------------------------
-
-The PCF8574(A) is plainly impossible to detect ! Stupid chip.
-So, you have to pass the I2C bus and address of the installed PCF857A
-and PCF8574A devices explicitly to the driver at load time via the
-force=... parameter.
-
-On detection (i.e. insmod, modprobe et al.), directories are being
-created for each detected PCF8574(A):
-
-/sys/bus/i2c/devices/<0>-<1>/
-where <0> is the bus the chip was detected on (e. g. i2c-0)
-and <1> the chip address ([20..27] or [38..3f]):
-
-(example: /sys/bus/i2c/devices/1-0020/)
-
-Inside these directories, there are two files each:
-read and write (and one file with chip name).
-
-The read file is read-only. Reading gives you the current I/O input
-if the corresponding output is set as 1, otherwise the current output
-value, that is to say 0.
-
-The write file is read/write. Writing a value outputs it on the I/O
-port. Reading returns the last written value. As it is not possible
-to read this value from the chip, you need to write at least once to
-this file before you can read back from it.
diff --git a/drivers/i2c/chips/Kconfig b/drivers/i2c/chips/Kconfig
index 8cd1a7f..f9618f4 100644
--- a/drivers/i2c/chips/Kconfig
+++ b/drivers/i2c/chips/Kconfig
@@ -16,23 +16,6 @@ config DS1682
 	  This driver can also be built as a module.  If so, the module
 	  will be called ds1682.
 
-config SENSORS_PCF8574
-	tristate "Philips PCF8574 and PCF8574A (DEPRECATED)"
-	depends on EXPERIMENTAL && GPIO_PCF857X = "n"
-	default n
-	help
-	  If you say yes here you get support for Philips PCF8574 and 
-	  PCF8574A chips. These chips are 8-bit I/O expanders for the I2C bus.
-
-	  This driver can also be built as a module.  If so, the module
-	  will be called pcf8574.
-
-	  This driver is deprecated and will be dropped soon. Use
-	  drivers/gpio/pcf857x.c instead.
-
-	  These devices are hard to detect and rarely found on mainstream
-	  hardware.  If unsure, say N.
-
 config SENSORS_TSL2550
 	tristate "Taos TSL2550 ambient light sensor"
 	depends on EXPERIMENTAL
diff --git a/drivers/i2c/chips/Makefile b/drivers/i2c/chips/Makefile
index 8cd778d..749cf36 100644
--- a/drivers/i2c/chips/Makefile
+++ b/drivers/i2c/chips/Makefile
@@ -11,7 +11,6 @@
 #
 
 obj-$(CONFIG_DS1682)		+= ds1682.o
-obj-$(CONFIG_SENSORS_PCF8574)	+= pcf8574.o
 obj-$(CONFIG_SENSORS_TSL2550)	+= tsl2550.o
 
 ifeq ($(CONFIG_I2C_DEBUG_CHIP),y)
diff --git a/drivers/i2c/chips/pcf8574.c b/drivers/i2c/chips/pcf8574.c
deleted file mode 100644
index 6ec3098..0000000
--- a/drivers/i2c/chips/pcf8574.c
+++ /dev/null
@@ -1,215 +0,0 @@
-/*
-    Copyright (c) 2000  Frodo Looijaard <frodol@dds.nl>, 
-                        Philip Edelbrock <phil@netroedge.com>,
-                        Dan Eaton <dan.eaton@rocketlogix.com>
-    Ported to Linux 2.6 by Aurelien Jarno <aurel32@debian.org> with 
-    the help of Jean Delvare <khali@linux-fr.org>
-
-    This program is free software; you can redistribute it and/or modify
-    it under the terms of the GNU General Public License as published by
-    the Free Software Foundation; either version 2 of the License, or
-    (at your option) any later version.
-    
-    This program is distributed in the hope that it will be useful,
-    but WITHOUT ANY WARRANTY; without even the implied warranty of
-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-    GNU General Public License for more details.
-
-    You should have received a copy of the GNU General Public License
-    along with this program; if not, write to the Free Software
-    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-*/
-
-/* A few notes about the PCF8574:
-
-* The PCF8574 is an 8-bit I/O expander for the I2C bus produced by
-  Philips Semiconductors.  It is designed to provide a byte I2C
-  interface to up to 8 separate devices.
-  
-* The PCF8574 appears as a very simple SMBus device which can be
-  read from or written to with SMBUS byte read/write accesses.
-
-  --Dan
-
-*/
-
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/slab.h>
-#include <linux/i2c.h>
-
-/* Addresses to scan: none, device can't be detected */
-static const unsigned short normal_i2c[] = { I2C_CLIENT_END };
-
-/* Insmod parameters */
-I2C_CLIENT_INSMOD_2(pcf8574, pcf8574a);
-
-/* Each client has this additional data */
-struct pcf8574_data {
-	int write;			/* Remember last written value */
-};
-
-static void pcf8574_init_client(struct i2c_client *client);
-
-/* following are the sysfs callback functions */
-static ssize_t show_read(struct device *dev, struct device_attribute *attr, char *buf)
-{
-	struct i2c_client *client = to_i2c_client(dev);
-	return sprintf(buf, "%u\n", i2c_smbus_read_byte(client));
-}
-
-static DEVICE_ATTR(read, S_IRUGO, show_read, NULL);
-
-static ssize_t show_write(struct device *dev, struct device_attribute *attr, char *buf)
-{
-	struct pcf8574_data *data = i2c_get_clientdata(to_i2c_client(dev));
-
-	if (data->write < 0)
-		return data->write;
-
-	return sprintf(buf, "%d\n", data->write);
-}
-
-static ssize_t set_write(struct device *dev, struct device_attribute *attr, const char *buf,
-			 size_t count)
-{
-	struct i2c_client *client = to_i2c_client(dev);
-	struct pcf8574_data *data = i2c_get_clientdata(client);
-	unsigned long val = simple_strtoul(buf, NULL, 10);
-
-	if (val > 0xff)
-		return -EINVAL;
-
-	data->write = val;
-	i2c_smbus_write_byte(client, data->write);
-	return count;
-}
-
-static DEVICE_ATTR(write, S_IWUSR | S_IRUGO, show_write, set_write);
-
-static struct attribute *pcf8574_attributes[] = {
-	&dev_attr_read.attr,
-	&dev_attr_write.attr,
-	NULL
-};
-
-static const struct attribute_group pcf8574_attr_group = {
-	.attrs = pcf8574_attributes,
-};
-
-/*
- * Real code
- */
-
-/* Return 0 if detection is successful, -ENODEV otherwise */
-static int pcf8574_detect(struct i2c_client *client, int kind,
-			  struct i2c_board_info *info)
-{
-	struct i2c_adapter *adapter = client->adapter;
-	const char *client_name;
-
-	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE))
-		return -ENODEV;
-
-	/* Now, we would do the remaining detection. But the PCF8574 is plainly
-	   impossible to detect! Stupid chip. */
-
-	/* Determine the chip type */
-	if (kind <= 0) {
-		if (client->addr >= 0x38 && client->addr <= 0x3f)
-			kind = pcf8574a;
-		else
-			kind = pcf8574;
-	}
-
-	if (kind == pcf8574a)
-		client_name = "pcf8574a";
-	else
-		client_name = "pcf8574";
-	strlcpy(info->type, client_name, I2C_NAME_SIZE);
-
-	return 0;
-}
-
-static int pcf8574_probe(struct i2c_client *client,
-			 const struct i2c_device_id *id)
-{
-	struct pcf8574_data *data;
-	int err;
-
-	data = kzalloc(sizeof(struct pcf8574_data), GFP_KERNEL);
-	if (!data) {
-		err = -ENOMEM;
-		goto exit;
-	}
-
-	i2c_set_clientdata(client, data);
-
-	/* Initialize the PCF8574 chip */
-	pcf8574_init_client(client);
-
-	/* Register sysfs hooks */
-	err = sysfs_create_group(&client->dev.kobj, &pcf8574_attr_group);
-	if (err)
-		goto exit_free;
-	return 0;
-
-      exit_free:
-	kfree(data);
-      exit:
-	return err;
-}
-
-static int pcf8574_remove(struct i2c_client *client)
-{
-	sysfs_remove_group(&client->dev.kobj, &pcf8574_attr_group);
-	kfree(i2c_get_clientdata(client));
-	return 0;
-}
-
-/* Called when we have found a new PCF8574. */
-static void pcf8574_init_client(struct i2c_client *client)
-{
-	struct pcf8574_data *data = i2c_get_clientdata(client);
-	data->write = -EAGAIN;
-}
-
-static const struct i2c_device_id pcf8574_id[] = {
-	{ "pcf8574", 0 },
-	{ "pcf8574a", 0 },
-	{ }
-};
-
-static struct i2c_driver pcf8574_driver = {
-	.driver = {
-		.name	= "pcf8574",
-	},
-	.probe		= pcf8574_probe,
-	.remove		= pcf8574_remove,
-	.id_table	= pcf8574_id,
-
-	.detect		= pcf8574_detect,
-	.address_data	= &addr_data,
-};
-
-static int __init pcf8574_init(void)
-{
-	return i2c_add_driver(&pcf8574_driver);
-}
-
-static void __exit pcf8574_exit(void)
-{
-	i2c_del_driver(&pcf8574_driver);
-}
-
-
-MODULE_AUTHOR
-    ("Frodo Looijaard <frodol@dds.nl>, "
-     "Philip Edelbrock <phil@netroedge.com>, "
-     "Dan Eaton <dan.eaton@rocketlogix.com> "
-     "and Aurelien Jarno <aurelien@aurel32.net>");
-MODULE_DESCRIPTION("PCF8574 driver");
-MODULE_LICENSE("GPL");
-
-module_init(pcf8574_init);
-module_exit(pcf8574_exit);
-- 
1.6.3.3

Re: [PATCH 3/4] i2c/chips: Remove deprecated pca9539-driver

[Ben Gardner]

On Wed, Sep 9, 2009 at 4:22 PM, Wolfram Sang<w.sang@pengutronix.de> wrote:
> The pca9539-driver in drivers/i2c/chips which just exports its registers to
> sysfs is superseeded by drivers/gpio/pca953x.c which properly uses the gpiolib.
> As this driver has been deprecated for more than a year, finally remove it.
>
> Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
> Cc: Ben Gardner <gardner.ben@gmail.com>
> Cc: Jean Delvare <khali@linux-fr.org>

Acked-by: Ben Gardner <gardner.ben@gmail.com>

Thanks for taking care of this.
Ben

Re: [Uclinux-dist-devel] Removing deprecated drivers from drivers/i2c/chips

[Mike Frysinger]

On Wed, Sep 9, 2009 at 17:22, Wolfram Sang wrote:
> continuing the quest to clean up and ultimately remove the drivers/i2c/chips
> directory, this patch series removes three drivers for GPIO-expanders which are
> obsoleted and marked as deprecated for more than a year. The newer (and better)
> drivers can be found in drivers/gpio.
>
> As it is ensured that the newer drivers cover the same i2c_device_ids, all
> platform_devices will still match. Some defconfig updates may be necessary
> though, but according to [1] this is left to the arch|platform-maintainers
> (also as most defconfigs are quite outdated). For that reason, I put the
> relevant arch-mailing-lists to Cc. Comments are welcome.

the Blackfin defconfigs refer to an input driver for the PCF8574, not
the I2C client driver
-mike

Re: [Uclinux-dist-devel] Removing deprecated drivers from drivers/i2c/chips

[Wolfram Sang]

[-- Attachment #1: Type: text/plain, Size: 401 bytes --]

> the Blackfin defconfigs refer to an input driver for the PCF8574, not
> the I2C client driver

Yup, I am aware of that. With the exception of:

blackfin/configs/PNAV-10_defconfig:773:CONFIG_SENSORS_PCF8574=m

Regards,

   Wolfram

-- 
Pengutronix e.K.                           | Wolfram Sang                |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 197 bytes --]

Re: [Uclinux-dist-devel] Removing deprecated drivers from drivers/i2c/chips

[Mike Frysinger]

On Thu, Sep 10, 2009 at 02:26, Wolfram Sang wrote:
>> the Blackfin defconfigs refer to an input driver for the PCF8574, not
>> the I2C client driver
>
> Yup, I am aware of that. With the exception of:
>
> blackfin/configs/PNAV-10_defconfig:773:CONFIG_SENSORS_PCF8574=m

thanks for double checking.  i'm not sure this board even has this
device.  i'll review the hardware.
-mike

Re: Removing deprecated drivers from drivers/i2c/chips

[Jean Delvare]

Hi Wolfram,

On Wed,  9 Sep 2009 23:22:47 +0200, Wolfram Sang wrote:
> continuing the quest to clean up and ultimately remove the drivers/i2c/chips
> directory, this patch series removes three drivers for GPIO-expanders which are
> obsoleted and marked as deprecated for more than a year. The newer (and better)
> drivers can be found in drivers/gpio.
> 
> As it is ensured that the newer drivers cover the same i2c_device_ids, all
> platform_devices will still match. Some defconfig updates may be necessary
> though, but according to [1] this is left to the arch|platform-maintainers
> (also as most defconfigs are quite outdated). For that reason, I put the
> relevant arch-mailing-lists to Cc. Comments are welcome.

Looks very good, I'll apply the 3 patches removing the legacy drivers.

Not sure about the patch to drivers/gpio/pcf857x.c, as there is no gpio
tree and no maintainer either AFAIK, I guess I shall pick it too?

Thanks,
-- 
Jean Delvare

Re: [PATCH 2/4] i2c/chips: Remove deprecated pcf8575-driver

[Bart Van Assche]

On Wed, Sep 9, 2009 at 11:22 PM, Wolfram Sang <w.sang@pengutronix.de> wrote=
:
>
> The pcf8575-driver in drivers/i2c/chips which just exports its register t=
o
> sysfs is superseeded by drivers/gpio/pcf857x.c which properly uses the gp=
iolib.
> As this driver has been deprecated for more than a year, finally remove i=
t.
>
> Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
> Cc: Bart Van Assche <bart.vanassche@gmail.com>
> Cc: Jean Delvare <khali@linux-fr.org>
> ---
> =A0Documentation/i2c/chips/pcf8575 | =A0 69 --------------
> =A0drivers/i2c/chips/Kconfig =A0 =A0 =A0 | =A0 18 ----
> =A0drivers/i2c/chips/Makefile =A0 =A0 =A0| =A0 =A01 -
> =A0drivers/i2c/chips/pcf8575.c =A0 =A0 | =A0198 -------------------------=
--------------
> =A04 files changed, 0 insertions(+), 286 deletions(-)
> =A0delete mode 100644 Documentation/i2c/chips/pcf8575
> =A0delete mode 100644 drivers/i2c/chips/pcf8575.c

This patch removes the documentation file
Documentation/i2c/chips/pcf8575 while there is no documentation under
Documentation/ for the drivers/gpio/pcf857x.c driver. Shouldn't proper
documentation for the pcf857x driver be added to the kernel tree
before the pcf8575 driver is removed ?

Bart.

Re: [PATCH 2/4] i2c/chips: Remove deprecated pcf8575-driver

[Wolfram Sang]

[-- Attachment #1: Type: text/plain, Size: 1005 bytes --]


> This patch removes the documentation file
> Documentation/i2c/chips/pcf8575 while there is no documentation under
> Documentation/ for the drivers/gpio/pcf857x.c driver. Shouldn't proper
> documentation for the pcf857x driver be added to the kernel tree
> before the pcf8575 driver is removed ?

I considered moving the documentation, but realized:

1st part is URLs for datasheets. Well, URLs easily grow outdated and those
datasheets are easily to find using your favourite search engine.

2nd part is a short description of the chips which is IMHO sufficently covered
in drivers/gpio/Kconfig.

3rd part (Detection) and 4th part (sysfs-interface) are obsolete for the new
drivers. The gpiolib interface again is covered in Documentation/gpio.txt

So I concluded to simply drop the documentation.

Regards,

   Wolfram

-- 
Pengutronix e.K.                           | Wolfram Sang                |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 197 bytes --]

Re: Removing deprecated drivers from drivers/i2c/chips

[Wolfram Sang]

[-- Attachment #1: Type: text/plain, Size: 396 bytes --]


> Not sure about the patch to drivers/gpio/pcf857x.c, as there is no gpio
> tree and no maintainer either AFAIK, I guess I shall pick it too?

I'd say so. An Ack from David Brownell would be nice, though.

Regards,

   Wolfram

-- 
Pengutronix e.K.                           | Wolfram Sang                |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 197 bytes --]