From: Benjamin Herrenschmidt <benh@kernel.crashing.org>
To: Dave Mitchell <dmitchell@appliedmicro.com>
Cc: linuxppc-dev@lists.ozlabs.org
Subject: Re: [PATCH][v2] powerpc/4xx: Add 16K FIFO size DTS entries on supported platforms
Date: Fri, 09 Oct 2009 13:15:54 +1100 [thread overview]
Message-ID: <1255054554.2355.28.camel@pasglop> (raw)
In-Reply-To: <1255019609-2033-1-git-send-email-dmitchell@appliedmicro.com>
On Thu, 2009-10-08 at 11:33 -0500, Dave Mitchell wrote:
> Adding tx/rx-fifo-size-gige to EMAC fields for evaluation kit DTS
> files where appropriate.
>
> Signed-off-by: Dave Mitchell <dmitchell@appliedmicro.com>
> Acked-by: Prodyut Hazarika <phazarika@appliedmicro.com>
> Acked-by: Victor Gallardo <vgallardo@appliedmicro.com>
> Acked-by: Loc Ho <lho@appliedmicro.com>
> ---
> v1->v2: local date/time was out-of-sync and thus mail was as well
I'll have to wait for the EMAC patch to go in, so ping me if you don't
see me take that one after that happens.
Cheers,
Ben.
> arch/powerpc/boot/dts/canyonlands.dts | 2 ++
> arch/powerpc/boot/dts/eiger.dts | 6 ++++++
> arch/powerpc/boot/dts/glacier.dts | 6 ++++++
> arch/powerpc/boot/dts/haleakala.dts | 2 ++
> arch/powerpc/boot/dts/kilauea.dts | 4 ++++
> arch/powerpc/boot/dts/makalu.dts | 4 ++++
> arch/powerpc/boot/dts/redwood.dts | 1 +
> 7 files changed, 25 insertions(+), 0 deletions(-)
>
> diff --git a/arch/powerpc/boot/dts/canyonlands.dts b/arch/powerpc/boot/dts/canyonlands.dts
> index c920170..cd56bb5 100644
> --- a/arch/powerpc/boot/dts/canyonlands.dts
> +++ b/arch/powerpc/boot/dts/canyonlands.dts
> @@ -352,6 +352,7 @@
> max-frame-size = <9000>;
> rx-fifo-size = <4096>;
> tx-fifo-size = <2048>;
> + rx-fifo-size-gige = <16384>;
> phy-mode = "rgmii";
> phy-map = <0x00000000>;
> rgmii-device = <&RGMII0>;
> @@ -381,6 +382,7 @@
> max-frame-size = <9000>;
> rx-fifo-size = <4096>;
> tx-fifo-size = <2048>;
> + rx-fifo-size-gige = <16384>;
> phy-mode = "rgmii";
> phy-map = <0x00000000>;
> rgmii-device = <&RGMII0>;
> diff --git a/arch/powerpc/boot/dts/eiger.dts b/arch/powerpc/boot/dts/eiger.dts
> index c4a934f..48bcf71 100644
> --- a/arch/powerpc/boot/dts/eiger.dts
> +++ b/arch/powerpc/boot/dts/eiger.dts
> @@ -316,6 +316,7 @@
> max-frame-size = <9000>;
> rx-fifo-size = <4096>;
> tx-fifo-size = <2048>;
> + rx-fifo-size-gige = <16384>;
> phy-mode = "rgmii";
> phy-map = <0x00000000>;
> rgmii-device = <&RGMII0>;
> @@ -345,6 +346,7 @@
> max-frame-size = <9000>;
> rx-fifo-size = <4096>;
> tx-fifo-size = <2048>;
> + rx-fifo-size-gige = <16384>;
> phy-mode = "rgmii";
> phy-map = <0x00000000>;
> rgmii-device = <&RGMII0>;
> @@ -375,6 +377,8 @@
> max-frame-size = <9000>;
> rx-fifo-size = <4096>;
> tx-fifo-size = <2048>;
> + rx-fifo-size-gige = <16384>;
> + tx-fifo-size-gige = <16384>; /* emac2&3 only */
> phy-mode = "rgmii";
> phy-map = <0x00000000>;
> rgmii-device = <&RGMII1>;
> @@ -403,6 +407,8 @@
> max-frame-size = <9000>;
> rx-fifo-size = <4096>;
> tx-fifo-size = <2048>;
> + rx-fifo-size-gige = <16384>;
> + tx-fifo-size-gige = <16384>; /* emac2&3 only */
> phy-mode = "rgmii";
> phy-map = <0x00000000>;
> rgmii-device = <&RGMII1>;
> diff --git a/arch/powerpc/boot/dts/glacier.dts b/arch/powerpc/boot/dts/glacier.dts
> index f3787a2..f6f6189 100644
> --- a/arch/powerpc/boot/dts/glacier.dts
> +++ b/arch/powerpc/boot/dts/glacier.dts
> @@ -292,6 +292,7 @@
> max-frame-size = <9000>;
> rx-fifo-size = <4096>;
> tx-fifo-size = <2048>;
> + rx-fifo-size-gige = <16384>;
> phy-mode = "rgmii";
> phy-map = <0x00000000>;
> rgmii-device = <&RGMII0>;
> @@ -321,6 +322,7 @@
> max-frame-size = <9000>;
> rx-fifo-size = <4096>;
> tx-fifo-size = <2048>;
> + rx-fifo-size-gige = <16384>;
> phy-mode = "rgmii";
> phy-map = <0x00000000>;
> rgmii-device = <&RGMII0>;
> @@ -351,6 +353,8 @@
> max-frame-size = <9000>;
> rx-fifo-size = <4096>;
> tx-fifo-size = <2048>;
> + rx-fifo-size-gige = <16384>;
> + tx-fifo-size-gige = <16384>; /* emac2&3 only */
> phy-mode = "rgmii";
> phy-map = <0x00000000>;
> rgmii-device = <&RGMII1>;
> @@ -379,6 +383,8 @@
> max-frame-size = <9000>;
> rx-fifo-size = <4096>;
> tx-fifo-size = <2048>;
> + rx-fifo-size-gige = <16384>;
> + tx-fifo-size-gige = <16384>; /* emac2&3 only */
> phy-mode = "rgmii";
> phy-map = <0x00000000>;
> rgmii-device = <&RGMII1>;
> diff --git a/arch/powerpc/boot/dts/haleakala.dts b/arch/powerpc/boot/dts/haleakala.dts
> index 5b2a494..2b25669 100644
> --- a/arch/powerpc/boot/dts/haleakala.dts
> +++ b/arch/powerpc/boot/dts/haleakala.dts
> @@ -226,6 +226,8 @@
> max-frame-size = <9000>;
> rx-fifo-size = <4096>;
> tx-fifo-size = <2048>;
> + rx-fifo-size-gige = <16384>;
> + tx-fifo-size-gige = <16384>;
> phy-mode = "rgmii";
> phy-map = <0x00000000>;
> rgmii-device = <&RGMII0>;
> diff --git a/arch/powerpc/boot/dts/kilauea.dts b/arch/powerpc/boot/dts/kilauea.dts
> index c465614..083e68e 100644
> --- a/arch/powerpc/boot/dts/kilauea.dts
> +++ b/arch/powerpc/boot/dts/kilauea.dts
> @@ -272,6 +272,8 @@
> max-frame-size = <9000>;
> rx-fifo-size = <4096>;
> tx-fifo-size = <2048>;
> + rx-fifo-size-gige = <16384>;
> + tx-fifo-size-gige = <16384>;
> phy-mode = "rgmii";
> phy-map = <0x00000000>;
> rgmii-device = <&RGMII0>;
> @@ -300,6 +302,8 @@
> max-frame-size = <9000>;
> rx-fifo-size = <4096>;
> tx-fifo-size = <2048>;
> + rx-fifo-size-gige = <16384>;
> + tx-fifo-size-gige = <16384>;
> phy-mode = "rgmii";
> phy-map = <0x00000000>;
> rgmii-device = <&RGMII0>;
> diff --git a/arch/powerpc/boot/dts/makalu.dts b/arch/powerpc/boot/dts/makalu.dts
> index ffc246e..63d48b6 100644
> --- a/arch/powerpc/boot/dts/makalu.dts
> +++ b/arch/powerpc/boot/dts/makalu.dts
> @@ -227,6 +227,8 @@
> max-frame-size = <9000>;
> rx-fifo-size = <4096>;
> tx-fifo-size = <2048>;
> + rx-fifo-size-gige = <16384>;
> + tx-fifo-size-gige = <16384>;
> phy-mode = "rgmii";
> phy-map = <0x0000003f>; /* Start at 6 */
> rgmii-device = <&RGMII0>;
> @@ -255,6 +257,8 @@
> max-frame-size = <9000>;
> rx-fifo-size = <4096>;
> tx-fifo-size = <2048>;
> + rx-fifo-size-gige = <16384>;
> + tx-fifo-size-gige = <16384>;
> phy-mode = "rgmii";
> phy-map = <0x00000000>;
> rgmii-device = <&RGMII0>;
> diff --git a/arch/powerpc/boot/dts/redwood.dts b/arch/powerpc/boot/dts/redwood.dts
> index ad402c4..d2af32e 100644
> --- a/arch/powerpc/boot/dts/redwood.dts
> +++ b/arch/powerpc/boot/dts/redwood.dts
> @@ -226,6 +226,7 @@
> max-frame-size = <9000>;
> rx-fifo-size = <4096>;
> tx-fifo-size = <2048>;
> + rx-fifo-size-gige = <16384>;
> phy-mode = "rgmii";
> phy-map = <0x00000000>;
> rgmii-device = <&RGMII0>;
next prev parent reply other threads:[~2009-10-09 2:16 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-10-08 16:33 [PATCH][v2] powerpc/4xx: Add 16K FIFO size DTS entries on supported platforms Dave Mitchell
2009-10-09 2:15 ` Benjamin Herrenschmidt [this message]
2009-10-09 11:50 ` Josh Boyer
2009-10-09 21:22 ` Benjamin Herrenschmidt
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1255054554.2355.28.camel@pasglop \
--to=benh@kernel.crashing.org \
--cc=dmitchell@appliedmicro.com \
--cc=linuxppc-dev@lists.ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).