* [PATCH] powerpc: Fix hypervisor TLB batching
@ 2009-10-12 7:47 Anton Blanchard
2009-10-12 8:44 ` Benjamin Herrenschmidt
0 siblings, 1 reply; 2+ messages in thread
From: Anton Blanchard @ 2009-10-12 7:47 UTC (permalink / raw)
To: benh; +Cc: linuxppc-dev
Profiling of a page fault scalability microbenchmark shows flush_hash_range
is not calling the batch hpte invalidate hcall (H_BULK_REMOVE).
It turns out we have a duplicate firmware feature for hcall-bulk and the
current setup code stops after finding the first match. This meant we never
batch and always do individual invalidates.
The patch below removes the duplicate and shifts FW_FEATURE_CMO to close
the gap. With the patch applied the single threaded page fault rate improves
from 217169 to 238755 per second on a POWER5 test box, a 10% improvement.
Signed-off-by: Anton Blanchard <anton@samba.org>
---
Index: linux.trees.git/arch/powerpc/include/asm/firmware.h
===================================================================
--- linux.trees.git.orig/arch/powerpc/include/asm/firmware.h 2009-10-12 18:11:56.000000000 +1100
+++ linux.trees.git/arch/powerpc/include/asm/firmware.h 2009-10-12 18:21:20.000000000 +1100
@@ -37,7 +37,7 @@
#define FW_FEATURE_VIO ASM_CONST(0x0000000000004000)
#define FW_FEATURE_RDMA ASM_CONST(0x0000000000008000)
#define FW_FEATURE_LLAN ASM_CONST(0x0000000000010000)
-#define FW_FEATURE_BULK ASM_CONST(0x0000000000020000)
+#define FW_FEATURE_BULK_REMOVE ASM_CONST(0x0000000000020000)
#define FW_FEATURE_XDABR ASM_CONST(0x0000000000040000)
#define FW_FEATURE_MULTITCE ASM_CONST(0x0000000000080000)
#define FW_FEATURE_SPLPAR ASM_CONST(0x0000000000100000)
@@ -45,8 +45,7 @@
#define FW_FEATURE_LPAR ASM_CONST(0x0000000000400000)
#define FW_FEATURE_PS3_LV1 ASM_CONST(0x0000000000800000)
#define FW_FEATURE_BEAT ASM_CONST(0x0000000001000000)
-#define FW_FEATURE_BULK_REMOVE ASM_CONST(0x0000000002000000)
-#define FW_FEATURE_CMO ASM_CONST(0x0000000004000000)
+#define FW_FEATURE_CMO ASM_CONST(0x0000000002000000)
#ifndef __ASSEMBLY__
@@ -58,8 +57,9 @@ enum {
FW_FEATURE_PERF | FW_FEATURE_DUMP | FW_FEATURE_INTERRUPT |
FW_FEATURE_MIGRATE | FW_FEATURE_PERFMON | FW_FEATURE_CRQ |
FW_FEATURE_VIO | FW_FEATURE_RDMA | FW_FEATURE_LLAN |
- FW_FEATURE_BULK | FW_FEATURE_XDABR | FW_FEATURE_MULTITCE |
- FW_FEATURE_SPLPAR | FW_FEATURE_LPAR | FW_FEATURE_CMO,
+ FW_FEATURE_BULK_REMOVE | FW_FEATURE_XDABR |
+ FW_FEATURE_MULTITCE | FW_FEATURE_SPLPAR | FW_FEATURE_LPAR |
+ FW_FEATURE_CMO,
FW_FEATURE_PSERIES_ALWAYS = 0,
FW_FEATURE_ISERIES_POSSIBLE = FW_FEATURE_ISERIES | FW_FEATURE_LPAR,
FW_FEATURE_ISERIES_ALWAYS = FW_FEATURE_ISERIES | FW_FEATURE_LPAR,
Index: linux.trees.git/arch/powerpc/platforms/pseries/firmware.c
===================================================================
--- linux.trees.git.orig/arch/powerpc/platforms/pseries/firmware.c 2009-10-12 18:08:37.000000000 +1100
+++ linux.trees.git/arch/powerpc/platforms/pseries/firmware.c 2009-10-12 18:12:54.000000000 +1100
@@ -51,11 +51,10 @@ firmware_features_table[FIRMWARE_MAX_FEA
{FW_FEATURE_VIO, "hcall-vio"},
{FW_FEATURE_RDMA, "hcall-rdma"},
{FW_FEATURE_LLAN, "hcall-lLAN"},
- {FW_FEATURE_BULK, "hcall-bulk"},
+ {FW_FEATURE_BULK_REMOVE, "hcall-bulk"},
{FW_FEATURE_XDABR, "hcall-xdabr"},
{FW_FEATURE_MULTITCE, "hcall-multi-tce"},
{FW_FEATURE_SPLPAR, "hcall-splpar"},
- {FW_FEATURE_BULK_REMOVE, "hcall-bulk"},
};
/* Build up the firmware features bitmask using the contents of
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: [PATCH] powerpc: Fix hypervisor TLB batching
2009-10-12 7:47 [PATCH] powerpc: Fix hypervisor TLB batching Anton Blanchard
@ 2009-10-12 8:44 ` Benjamin Herrenschmidt
0 siblings, 0 replies; 2+ messages in thread
From: Benjamin Herrenschmidt @ 2009-10-12 8:44 UTC (permalink / raw)
To: Anton Blanchard; +Cc: linuxppc-dev
On Mon, 2009-10-12 at 18:47 +1100, Anton Blanchard wrote:
> Profiling of a page fault scalability microbenchmark shows flush_hash_range
> is not calling the batch hpte invalidate hcall (H_BULK_REMOVE).
>
> It turns out we have a duplicate firmware feature for hcall-bulk and the
> current setup code stops after finding the first match. This meant we never
> batch and always do individual invalidates.
>
> The patch below removes the duplicate and shifts FW_FEATURE_CMO to close
> the gap. With the patch applied the single threaded page fault rate improves
> from 217169 to 238755 per second on a POWER5 test box, a 10% improvement.
>
> Signed-off-by: Anton Blanchard <anton@samba.org>
> ---
Good catch !
Ben.
> Index: linux.trees.git/arch/powerpc/include/asm/firmware.h
> ===================================================================
> --- linux.trees.git.orig/arch/powerpc/include/asm/firmware.h 2009-10-12 18:11:56.000000000 +1100
> +++ linux.trees.git/arch/powerpc/include/asm/firmware.h 2009-10-12 18:21:20.000000000 +1100
> @@ -37,7 +37,7 @@
> #define FW_FEATURE_VIO ASM_CONST(0x0000000000004000)
> #define FW_FEATURE_RDMA ASM_CONST(0x0000000000008000)
> #define FW_FEATURE_LLAN ASM_CONST(0x0000000000010000)
> -#define FW_FEATURE_BULK ASM_CONST(0x0000000000020000)
> +#define FW_FEATURE_BULK_REMOVE ASM_CONST(0x0000000000020000)
> #define FW_FEATURE_XDABR ASM_CONST(0x0000000000040000)
> #define FW_FEATURE_MULTITCE ASM_CONST(0x0000000000080000)
> #define FW_FEATURE_SPLPAR ASM_CONST(0x0000000000100000)
> @@ -45,8 +45,7 @@
> #define FW_FEATURE_LPAR ASM_CONST(0x0000000000400000)
> #define FW_FEATURE_PS3_LV1 ASM_CONST(0x0000000000800000)
> #define FW_FEATURE_BEAT ASM_CONST(0x0000000001000000)
> -#define FW_FEATURE_BULK_REMOVE ASM_CONST(0x0000000002000000)
> -#define FW_FEATURE_CMO ASM_CONST(0x0000000004000000)
> +#define FW_FEATURE_CMO ASM_CONST(0x0000000002000000)
>
> #ifndef __ASSEMBLY__
>
> @@ -58,8 +57,9 @@ enum {
> FW_FEATURE_PERF | FW_FEATURE_DUMP | FW_FEATURE_INTERRUPT |
> FW_FEATURE_MIGRATE | FW_FEATURE_PERFMON | FW_FEATURE_CRQ |
> FW_FEATURE_VIO | FW_FEATURE_RDMA | FW_FEATURE_LLAN |
> - FW_FEATURE_BULK | FW_FEATURE_XDABR | FW_FEATURE_MULTITCE |
> - FW_FEATURE_SPLPAR | FW_FEATURE_LPAR | FW_FEATURE_CMO,
> + FW_FEATURE_BULK_REMOVE | FW_FEATURE_XDABR |
> + FW_FEATURE_MULTITCE | FW_FEATURE_SPLPAR | FW_FEATURE_LPAR |
> + FW_FEATURE_CMO,
> FW_FEATURE_PSERIES_ALWAYS = 0,
> FW_FEATURE_ISERIES_POSSIBLE = FW_FEATURE_ISERIES | FW_FEATURE_LPAR,
> FW_FEATURE_ISERIES_ALWAYS = FW_FEATURE_ISERIES | FW_FEATURE_LPAR,
> Index: linux.trees.git/arch/powerpc/platforms/pseries/firmware.c
> ===================================================================
> --- linux.trees.git.orig/arch/powerpc/platforms/pseries/firmware.c 2009-10-12 18:08:37.000000000 +1100
> +++ linux.trees.git/arch/powerpc/platforms/pseries/firmware.c 2009-10-12 18:12:54.000000000 +1100
> @@ -51,11 +51,10 @@ firmware_features_table[FIRMWARE_MAX_FEA
> {FW_FEATURE_VIO, "hcall-vio"},
> {FW_FEATURE_RDMA, "hcall-rdma"},
> {FW_FEATURE_LLAN, "hcall-lLAN"},
> - {FW_FEATURE_BULK, "hcall-bulk"},
> + {FW_FEATURE_BULK_REMOVE, "hcall-bulk"},
> {FW_FEATURE_XDABR, "hcall-xdabr"},
> {FW_FEATURE_MULTITCE, "hcall-multi-tce"},
> {FW_FEATURE_SPLPAR, "hcall-splpar"},
> - {FW_FEATURE_BULK_REMOVE, "hcall-bulk"},
> };
>
> /* Build up the firmware features bitmask using the contents of
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2009-10-12 8:44 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2009-10-12 7:47 [PATCH] powerpc: Fix hypervisor TLB batching Anton Blanchard
2009-10-12 8:44 ` Benjamin Herrenschmidt
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).