[PATCHv2 1/3] mpc52xx/wdt: OF property to enable the WDT on boot

[PATCHv2 1/3] mpc52xx/wdt: OF property to enable the WDT on boot

[Albrecht Dreß]

Add the "fsl,wdt-on-boot" OF property as to reserve a GPT as WDT which may
be a requirement in safety-related (e.g. ISO/EN 61508) applications.

Signed-off-by: Albrecht Dre=DF <albrecht.dress@arcor.de>

---

Change against v1: rename the new property.

 Documentation/powerpc/dts-bindings/fsl/mpc5200.txt |   17 ++++++++++++++++=
-
 1 files changed, 16 insertions(+), 1 deletions(-)

diff --git a/Documentation/powerpc/dts-bindings/fsl/mpc5200.txt b/Documenta=
tion/powerpc/dts-bindings/fsl/mpc5200.txt
index 8447fd7..ddd5ee3 100644
--- a/Documentation/powerpc/dts-bindings/fsl/mpc5200.txt
+++ b/Documentation/powerpc/dts-bindings/fsl/mpc5200.txt
@@ -103,7 +103,22 @@ fsl,mpc5200-gpt nodes
 ---------------------
 On the mpc5200 and 5200b, GPT0 has a watchdog timer function.  If the boar=
d
 design supports the internal wdt, then the device node for GPT0 should
-include the empty property 'fsl,has-wdt'.
+include the empty property 'fsl,has-wdt'.  Note that this does not activat=
e
+the watchdog.  The timer will function as a GPT if the timer api is used, =
and
+it will function as watchdog if the watchdog device is used.  The watchdog
+mode has priority over the gpt mode, i.e. if the watchdog is activated, an=
y
+gpt api call to this timer will fail with -EBUSY.
+
+If you add the property
+	fsl,wdt-on-boot =3D <n>;
+GPT0 will be marked as in-use watchdog, i.e. blocking every gpt access to =
it.
+If n>0, the watchdog is started with a timeout of n seconds.  If n=3D0, th=
e
+configuration of the watchdog is not touched.  This is useful in two cases=
:
+- just mark GPT0 as watchdog, blocking gpt accesses, and configure it late=
r;
+- do not touch a configuration assigned by the boot loader which supervise=
s
+  the boot process itself.
+
+The watchdog will respect the CONFIG_WATCHDOG_NOWAYOUT option.
=20
 An mpc5200-gpt can be used as a single line GPIO controller.  To do so,
 add the following properties to the gpt node:

Re: [PATCHv2 1/3] mpc52xx/wdt: OF property to enable the WDT on boot

[Grant Likely]

On Thu, Nov 12, 2009 at 11:43 AM, Albrecht Dre=DF <albrecht.dress@arcor.de>=
 wrote:
> Add the "fsl,wdt-on-boot" OF property as to reserve a GPT as WDT which ma=
y
> be a requirement in safety-related (e.g. ISO/EN 61508) applications.
>
> Signed-off-by: Albrecht Dre=DF <albrecht.dress@arcor.de>
>
> ---
>
> Change against v1: rename the new property.
>
> =A0Documentation/powerpc/dts-bindings/fsl/mpc5200.txt | =A0 17 ++++++++++=
++++++-
> =A01 files changed, 16 insertions(+), 1 deletions(-)
>
> diff --git a/Documentation/powerpc/dts-bindings/fsl/mpc5200.txt b/Documen=
tation/powerpc/dts-bindings/fsl/mpc5200.txt
> index 8447fd7..ddd5ee3 100644
> --- a/Documentation/powerpc/dts-bindings/fsl/mpc5200.txt
> +++ b/Documentation/powerpc/dts-bindings/fsl/mpc5200.txt
> @@ -103,7 +103,22 @@ fsl,mpc5200-gpt nodes
> =A0---------------------
> =A0On the mpc5200 and 5200b, GPT0 has a watchdog timer function. =A0If th=
e board
> =A0design supports the internal wdt, then the device node for GPT0 should
> -include the empty property 'fsl,has-wdt'.
> +include the empty property 'fsl,has-wdt'. =A0Note that this does not act=
ivate
> +the watchdog. =A0The timer will function as a GPT if the timer api is us=
ed, and
> +it will function as watchdog if the watchdog device is used. =A0The watc=
hdog
> +mode has priority over the gpt mode, i.e. if the watchdog is activated, =
any
> +gpt api call to this timer will fail with -EBUSY.
> +
> +If you add the property
> + =A0 =A0 =A0 fsl,wdt-on-boot =3D <n>;
> +GPT0 will be marked as in-use watchdog, i.e. blocking every gpt access t=
o it.
> +If n>0, the watchdog is started with a timeout of n seconds. =A0If n=3D0=
, the
> +configuration of the watchdog is not touched. =A0This is useful in two c=
ases:
> +- just mark GPT0 as watchdog, blocking gpt accesses, and configure it la=
ter;
> +- do not touch a configuration assigned by the boot loader which supervi=
ses
> + =A0the boot process itself.
> +
> +The watchdog will respect the CONFIG_WATCHDOG_NOWAYOUT option.

I think it would be better to use a device tree property to enable up
NOWAYOUT.  The static config isn't multiplatform-friendly.  Thoughts?

Otherwise, this looks good to me.

g.

--=20
Grant Likely, B.Sc., P.Eng.
Secret Lab Technologies Ltd.

Re: [PATCHv2 1/3] mpc52xx/wdt: OF property to enable the WDT on boot

[Albrecht Dreß]

[-- Attachment #1: Type: text/plain, Size: 1032 bytes --]

Hi Grant!

Am 12.11.09 20:06 schrieb(en) Grant Likely:
> > +The watchdog will respect the CONFIG_WATCHDOG_NOWAYOUT option.
> 
> I think it would be better to use a device tree property to enable up
> NOWAYOUT.  The static config isn't multiplatform-friendly.  Thoughts?

I fully agree with you that this property would fit perfectly in the device tree.  However, if we now add it *only* for the 52xx, but not for other device tree-aware platforms, this might be somewhat confusing.  The good thing is that it wouldn't break  
anything for the 5200 as the old wdt driver didn't work anyway.

One *real* advantage of the compile-time option is that it actually removes the code which stops the wdt.  I'm not a real expert in that, but if we argue that the system is "safe" as required by IEC/EN 61508 part 3, it's probably beneficial if we can show  
that there *is* no code to stop the wdt, not a snipplet only disabled by a flag.

Just my €0.01, though - maybe more insight from the WDT gurus?

Cheers, Albrecht.

[-- Attachment #2: Type: application/pgp-signature, Size: 190 bytes --]