From: Benjamin Herrenschmidt <benh@kernel.crashing.org>
To: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
Cc: "linuxppc-dev@ozlabs.org" <linuxppc-dev@ozlabs.org>
Subject: Re: [PATCH] zlib: Optimize inffast when copying direct from output
Date: Tue, 24 Nov 2009 14:12:43 +1100 [thread overview]
Message-ID: <1259032363.16367.108.camel@pasglop> (raw)
In-Reply-To: <1257843644-8496-1-git-send-email-Joakim.Tjernlund@transmode.se>
On Tue, 2009-11-10 at 10:00 +0100, Joakim Tjernlund wrote:
> JFFS2 uses lesser compression ratio and inflate always
> ends up in "copy direct from output" case.
> This patch tries to optimize the direct copy procedure.
> Uses get_unaligned() but only in one place.
> The copy loop just above this one can also use this
> optimization, but I havn't done so as I have not tested if it
> is a win there too.
> On my MPC8321 this is about 17% faster on my JFFS2 root FS
> than the original.
> ---
>
> Would like some testing of the PowerPC boot wrapper and
> a LE target before sending it upstream.
Well, you should probably submit that patch to lkml then :-)
I'm not sure its going to work to use get_unaligned() like that on all
archs .. it might be definitely something to discuss on some more
appropriate mailing list.
Cheers,
Ben.
> arch/powerpc/boot/Makefile | 4 ++-
> lib/zlib_inflate/inffast.c | 48 +++++++++++++++++++++++++++++++++----------
> 2 files changed, 40 insertions(+), 12 deletions(-)
>
> diff --git a/arch/powerpc/boot/Makefile b/arch/powerpc/boot/Makefile
> index 9ae7b7e..98e4c4f 100644
> --- a/arch/powerpc/boot/Makefile
> +++ b/arch/powerpc/boot/Makefile
> @@ -20,7 +20,7 @@
> all: $(obj)/zImage
>
> BOOTCFLAGS := -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs \
> - -fno-strict-aliasing -Os -msoft-float -pipe \
> + -fno-strict-aliasing -Os -msoft-float -pipe -D__KERNEL__\
> -fomit-frame-pointer -fno-builtin -fPIC -nostdinc \
> -isystem $(shell $(CROSS32CC) -print-file-name=include)
> BOOTAFLAGS := -D__ASSEMBLY__ $(BOOTCFLAGS) -traditional -nostdinc
> @@ -34,6 +34,8 @@ BOOTCFLAGS += -fno-stack-protector
> endif
>
> BOOTCFLAGS += -I$(obj) -I$(srctree)/$(obj)
> +BOOTCFLAGS += -include include/linux/autoconf.h -Iarch/powerpc/include
> +BOOTCFLAGS += -Iinclude
>
> DTS_FLAGS ?= -p 1024
>
> diff --git a/lib/zlib_inflate/inffast.c b/lib/zlib_inflate/inffast.c
> index 8550b0c..0c7fa3d 100644
> --- a/lib/zlib_inflate/inffast.c
> +++ b/lib/zlib_inflate/inffast.c
> @@ -4,6 +4,7 @@
> */
>
> #include <linux/zutil.h>
> +#include <asm/unaligned.h>
> #include "inftrees.h"
> #include "inflate.h"
> #include "inffast.h"
> @@ -24,9 +25,11 @@
> #ifdef POSTINC
> # define OFF 0
> # define PUP(a) *(a)++
> +# define UP_UNALIGNED(a) get_unaligned((a)++)
> #else
> # define OFF 1
> # define PUP(a) *++(a)
> +# define UP_UNALIGNED(a) get_unaligned(++(a))
> #endif
>
> /*
> @@ -239,18 +242,41 @@ void inflate_fast(z_streamp strm, unsigned start)
> }
> }
> else {
> + unsigned short *sout;
> + unsigned long loops;
> +
> from = out - dist; /* copy direct from output */
> - do { /* minimum length is three */
> - PUP(out) = PUP(from);
> - PUP(out) = PUP(from);
> - PUP(out) = PUP(from);
> - len -= 3;
> - } while (len > 2);
> - if (len) {
> - PUP(out) = PUP(from);
> - if (len > 1)
> - PUP(out) = PUP(from);
> - }
> + /* minimum length is three */
> + /* Align out addr */
> + if (!((long)(out - 1 + OFF)) & 1) {
> + PUP(out) = PUP(from);
> + len--;
> + }
> + sout = (unsigned short *)(out - OFF);
> + if (dist > 2 ) {
> + unsigned short *sfrom;
> +
> + sfrom = (unsigned short *)(from - OFF);
> + loops = len >> 1;
> + do
> + PUP(sout) = UP_UNALIGNED(sfrom);
> + while (--loops);
> + out = (unsigned char *)sout + OFF;
> + from = (unsigned char *)sfrom + OFF;
> + } else { /* dist == 1 or dist == 2 */
> + unsigned short pat16;
> +
> + pat16 = *(sout-2+2*OFF);
> + if (dist == 1)
> + pat16 = (pat16 & 0xff) | ((pat16 & 0xff ) << 8);
> + loops = len >> 1;
> + do
> + PUP(sout) = pat16;
> + while (--loops);
> + out = (unsigned char *)sout + OFF;
> + }
> + if (len & 1)
> + PUP(out) = PUP(from);
> }
> }
> else if ((op & 64) == 0) { /* 2nd level distance code */
next prev parent reply other threads:[~2009-11-24 3:12 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <Received>
2009-11-10 9:00 ` [PATCH] zlib: Optimize inffast when copying direct from output Joakim Tjernlund
2009-11-24 3:12 ` Benjamin Herrenschmidt [this message]
2009-11-26 8:30 ` Joakim Tjernlund
2009-11-26 8:46 ` Benjamin Herrenschmidt
2009-11-26 9:02 ` Joakim Tjernlund
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1259032363.16367.108.camel@pasglop \
--to=benh@kernel.crashing.org \
--cc=Joakim.Tjernlund@transmode.se \
--cc=linuxppc-dev@ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).