* 2.6.23-rc3 is not booting
@ 2007-09-11 18:05 sivaji
0 siblings, 0 replies; 4+ messages in thread
From: sivaji @ 2007-09-11 18:05 UTC (permalink / raw)
To: linuxppc-dev
Hi,
I am using the kernel 2.6.23-rc3, when i try to boot the kernel i got
following messages.
Booting image at 00200000 ...
Image Name: Linux-2.6.23-rc3
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 1487259 Bytes = 1.4 MB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
Booting using flat device tree at 0x600000.
I have tested with and without pci express support in the kernel and
the device tree. But the result was same.
Processor information :
8641D processor and the silicon revision is 2.0.
Part : MPC8641D
Revision: 2.0
e600 Core Revision: 2.2
DeviceMarking: B
Processor Version Register Value: 0x8004_0202
System Version Register Value: 0x8090_0120
Please Advice me.
by
Sivaji
--
View this message in context: http://www.nabble.com/2.6.23-rc3-is-not-booting-tf4424317.html#a12620437
Sent from the linuxppc-dev mailing list archive at Nabble.com.
^ permalink raw reply [flat|nested] 4+ messages in thread
* 2.6.23-rc3 is not booting
@ 2007-08-22 6:32 sivaji
2007-08-22 13:30 ` Kumar Gala
0 siblings, 1 reply; 4+ messages in thread
From: sivaji @ 2007-08-22 6:32 UTC (permalink / raw)
To: linuxppc-dev
Hai,
I am using the kernel 2.6.23-rc3. i am trying to boot this kernel
to my 8641D board. It was not booting.
I go the following message
Bytes transferred = 1505 (5e1 hex)
## Booting image at 00200000 ...
Image Name: Linux-2.6.23-rc3
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 1801717 Bytes = 1.7 MB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
Booting using flat device tree at 0x800000
Whether the problem belongs to device tree? I am using the mpc8641_hpcn.dts
file
Pls Advice me.
--
View this message in context: http://www.nabble.com/2.6.23-rc3-is-not-booting-tf4309661.html#a12268833
Sent from the linuxppc-dev mailing list archive at Nabble.com.
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: 2.6.23-rc3 is not booting
2007-08-22 6:32 sivaji
@ 2007-08-22 13:30 ` Kumar Gala
2007-08-23 9:30 ` sivaji
0 siblings, 1 reply; 4+ messages in thread
From: Kumar Gala @ 2007-08-22 13:30 UTC (permalink / raw)
To: sivaji; +Cc: linuxppc-dev
On Aug 22, 2007, at 1:32 AM, sivaji wrote:
>
> Hai,
> I am using the kernel 2.6.23-rc3. i am trying to boot this
> kernel
> to my 8641D board. It was not booting.
> I go the following message
>
> Bytes transferred = 1505 (5e1 hex)
> ## Booting image at 00200000 ...
> Image Name: Linux-2.6.23-rc3
> Image Type: PowerPC Linux Kernel Image (gzip compressed)
> Data Size: 1801717 Bytes = 1.7 MB
> Load Address: 00000000
> Entry Point: 00000000
> Verifying Checksum ... OK
> Uncompressing Kernel Image ... OK
> Booting using flat device tree at 0x800000
>
> Whether the problem belongs to device tree? I am using the
> mpc8641_hpcn.dts
> file
>
> Pls Advice me.
What rev board/silicon do you have? I'd suggest building the kernel
w/o PCI support and see what happens. Make sure you've got the
latest dts from the kernel tree.
- k
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: 2.6.23-rc3 is not booting
2007-08-22 13:30 ` Kumar Gala
@ 2007-08-23 9:30 ` sivaji
0 siblings, 0 replies; 4+ messages in thread
From: sivaji @ 2007-08-23 9:30 UTC (permalink / raw)
To: linuxppc-dev
Hi,
I am using 8641D processor and the silicon revision is 2.0.
Part : MPC8641D
Revision: 2.0
e600 Core Revision: 2.2
DeviceMarking: B
Processor Version Register Value: 0x8004_0202
System Version Register Value: 0x8090_0120
by
Sivaji
>
> Hai,
> I am using the kernel 2.6.23-rc3. i am trying to boot this
> kernel
> to my 8641D board. It was not booting.
> I go the following message
>
> Bytes transferred = 1505 (5e1 hex)
> ## Booting image at 00200000 ...
> Image Name: Linux-2.6.23-rc3
> Image Type: PowerPC Linux Kernel Image (gzip compressed)
> Data Size: 1801717 Bytes = 1.7 MB
> Load Address: 00000000
> Entry Point: 00000000
> Verifying Checksum ... OK
> Uncompressing Kernel Image ... OK
> Booting using flat device tree at 0x800000
>
> Whether the problem belongs to device tree? I am using the
> mpc8641_hpcn.dts
> file
>
> Pls Advice me.
What rev board/silicon do you have? I'd suggest building the kernel
w/o PCI support and see what happens. Make sure you've got the
latest dts from the kernel tree.
- k
_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@ozlabs.org
https://ozlabs.org/mailman/listinfo/linuxppc-dev
--
View this message in context: http://www.nabble.com/2.6.23-rc3-is-not-booting-tf4309661.html#a12290295
Sent from the linuxppc-dev mailing list archive at Nabble.com.
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2007-09-11 18:05 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2007-09-11 18:05 2.6.23-rc3 is not booting sivaji
-- strict thread matches above, loose matches on Subject: below --
2007-08-22 6:32 sivaji
2007-08-22 13:30 ` Kumar Gala
2007-08-23 9:30 ` sivaji
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).