From: Liu Yu <yu.liu@freescale.com>
To: galak@kernel.crashing.org, davem@davemloft.net
Cc: netdev@vger.kernel.org, Liu Yu <yu.liu@freescale.com>,
linuxppc-dev@lists.ozlabs.org
Subject: [PATCH 1/4] dts/mpc8569mds: Cleanup tbi phy to support rtbi
Date: Thu, 14 Jan 2010 16:13:16 +0800 [thread overview]
Message-ID: <1263456799-3306-1-git-send-email-yu.liu@freescale.com> (raw)
After these change, when need to work in rtbi mode,
just change phy-connection-type to "rtbi".
Also, this work can be done by u-boot.
Signed-off-by: Liu Yu <yu.liu@freescale.com>
---
arch/powerpc/boot/dts/mpc8569mds.dts | 47 ++++++++++++++++++++++++++++++---
1 files changed, 42 insertions(+), 5 deletions(-)
diff --git a/arch/powerpc/boot/dts/mpc8569mds.dts b/arch/powerpc/boot/dts/mpc8569mds.dts
index 795eb36..8b72eaf 100644
--- a/arch/powerpc/boot/dts/mpc8569mds.dts
+++ b/arch/powerpc/boot/dts/mpc8569mds.dts
@@ -535,6 +535,7 @@
rx-clock-name = "none";
tx-clock-name = "clk12";
pio-handle = <&pio1>;
+ tbi-handle = <&tbi1>;
phy-handle = <&qe_phy0>;
phy-connection-type = "rgmii-id";
};
@@ -579,7 +580,7 @@
reg = <0x6>;
device_type = "ethernet-phy";
};
- tbi-phy@11 {
+ tbi1: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
@@ -590,7 +591,7 @@
reg = <0x3520 0x18>;
compatible = "fsl,ucc-mdio";
- tbi0: tbi-phy@15 {
+ tbi6: tbi-phy@15 {
reg = <0x15>;
device_type = "tbi-phy";
};
@@ -600,7 +601,7 @@
#size-cells = <0>;
reg = <0x3720 0x38>;
compatible = "fsl,ucc-mdio";
- tbi1: tbi-phy@17 {
+ tbi8: tbi-phy@17 {
reg = <0x17>;
device_type = "tbi-phy";
};
@@ -617,10 +618,22 @@
rx-clock-name = "none";
tx-clock-name = "clk12";
pio-handle = <&pio3>;
+ tbi-handle = <&tbi3>;
phy-handle = <&qe_phy2>;
phy-connection-type = "rgmii-id";
};
+ mdio@2320 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x2320 0x18>;
+ compatible = "fsl,ucc-mdio";
+ tbi3: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
+
enet1: ucc@3000 {
device_type = "network";
compatible = "ucc_geth";
@@ -632,10 +645,22 @@
rx-clock-name = "none";
tx-clock-name = "clk17";
pio-handle = <&pio2>;
+ tbi-handle = <&tbi2>;
phy-handle = <&qe_phy1>;
phy-connection-type = "rgmii-id";
};
+ mdio@3120 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x3120 0x18>;
+ compatible = "fsl,ucc-mdio";
+ tbi2: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
+
enet3: ucc@3200 {
device_type = "network";
compatible = "ucc_geth";
@@ -647,10 +672,22 @@
rx-clock-name = "none";
tx-clock-name = "clk17";
pio-handle = <&pio4>;
+ tbi-handle = <&tbi4>;
phy-handle = <&qe_phy3>;
phy-connection-type = "rgmii-id";
};
+ mdio@3320 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x3320 0x18>;
+ compatible = "fsl,ucc-mdio";
+ tbi4: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
+
enet5: ucc@3400 {
device_type = "network";
compatible = "ucc_geth";
@@ -661,7 +698,7 @@
local-mac-address = [ 00 00 00 00 00 00 ];
rx-clock-name = "none";
tx-clock-name = "none";
- tbi-handle = <&tbi0>;
+ tbi-handle = <&tbi6>;
phy-handle = <&qe_phy5>;
phy-connection-type = "sgmii";
};
@@ -676,7 +713,7 @@
local-mac-address = [ 00 00 00 00 00 00 ];
rx-clock-name = "none";
tx-clock-name = "none";
- tbi-handle = <&tbi1>;
+ tbi-handle = <&tbi8>;
phy-handle = <&qe_phy7>;
phy-connection-type = "sgmii";
};
--
1.6.4
next reply other threads:[~2010-01-14 8:20 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-01-14 8:13 Liu Yu [this message]
2010-01-14 8:13 ` [PATCH 2/4] mpc8569mds: Add bscr setting for rtbi mode Liu Yu
2010-01-14 8:13 ` [PATCH 3/4] ucc_geth: update the tbi-phy setting Liu Yu
2010-01-14 8:13 ` [PATCH 4/4] phy: add RTBI mode for m88e1111 Liu Yu
2010-01-14 16:20 ` Kumar Gala
2010-01-15 2:49 ` Liu Yu-B13201
2010-01-21 9:18 ` David Miller
2010-02-01 22:00 ` [PATCH 3/4] ucc_geth: update the tbi-phy setting Grant Likely
2010-02-01 21:57 ` [PATCH 2/4] mpc8569mds: Add bscr setting for rtbi mode Grant Likely
2010-02-02 5:57 ` Liu Yu-B13201
2010-02-01 21:46 ` [PATCH 1/4] dts/mpc8569mds: Cleanup tbi phy to support rtbi Grant Likely
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1263456799-3306-1-git-send-email-yu.liu@freescale.com \
--to=yu.liu@freescale.com \
--cc=davem@davemloft.net \
--cc=galak@kernel.crashing.org \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).