From: Anatolij Gustschin <agust@denx.de>
To: linuxppc-dev@ozlabs.org
Cc: wd@denx.de, dzu@denx.de, Anatolij Gustschin <agust@denx.de>,
Piotr Ziecik <kosmo@semihalf.com>
Subject: [PATCH 1/8 v2] powerpc/mpc5121: Add machine restart support
Date: Wed, 27 Jan 2010 13:07:25 +0100 [thread overview]
Message-ID: <1264594052-20317-2-git-send-email-agust@denx.de> (raw)
In-Reply-To: <1264594052-20317-1-git-send-email-agust@denx.de>
Add reset module registers representation and
machine restart callback for mpc5121 platform.
Signed-off-by: Piotr Ziecik <kosmo@semihalf.com>
Signed-off-by: Wolfgang Denk <wd@denx.de>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: John Rigby <jcrigby@gmail.com>
---
Changes since v1:
- use 'struct mpc512x_reset_module *' type for 'reset_module_base'
- remove empty line
- remove leftover colon and use pr_err() instead of printk.
arch/powerpc/include/asm/mpc5xxx.h | 14 +++++++++-
arch/powerpc/platforms/512x/mpc5121_ads.c | 1 +
arch/powerpc/platforms/512x/mpc5121_generic.c | 1 +
arch/powerpc/platforms/512x/mpc512x.h | 1 +
arch/powerpc/platforms/512x/mpc512x_shared.c | 34 +++++++++++++++++++++++++
5 files changed, 50 insertions(+), 1 deletions(-)
diff --git a/arch/powerpc/include/asm/mpc5xxx.h b/arch/powerpc/include/asm/mpc5xxx.h
index 5ce9c5f..0004986 100644
--- a/arch/powerpc/include/asm/mpc5xxx.h
+++ b/arch/powerpc/include/asm/mpc5xxx.h
@@ -18,5 +18,17 @@
extern unsigned long mpc5xxx_get_bus_frequency(struct device_node *node);
-#endif /* __ASM_POWERPC_MPC5xxx_H__ */
+/* MPC512x Reset module registers */
+struct mpc512x_reset_module {
+ u32 rcwlr; /* Reset Configuration Word Low Register */
+ u32 rcwhr; /* Reset Configuration Word High Register */
+ u32 reserved1;
+ u32 reserved2;
+ u32 rsr; /* Reset Status Register */
+ u32 rmr; /* Reset Mode Register */
+ u32 rpr; /* Reset Protection Register */
+ u32 rcr; /* Reset Control Register */
+ u32 rcer; /* Reset Control Enable Register */
+};
+#endif /* __ASM_POWERPC_MPC5xxx_H__ */
diff --git a/arch/powerpc/platforms/512x/mpc5121_ads.c b/arch/powerpc/platforms/512x/mpc5121_ads.c
index 441abc4..2f40404 100644
--- a/arch/powerpc/platforms/512x/mpc5121_ads.c
+++ b/arch/powerpc/platforms/512x/mpc5121_ads.c
@@ -68,4 +68,5 @@ define_machine(mpc5121_ads) {
.init_IRQ = mpc5121_ads_init_IRQ,
.get_irq = ipic_get_irq,
.calibrate_decr = generic_calibrate_decr,
+ .restart = mpc512x_restart,
};
diff --git a/arch/powerpc/platforms/512x/mpc5121_generic.c b/arch/powerpc/platforms/512x/mpc5121_generic.c
index 2479de9..de4c3f7 100644
--- a/arch/powerpc/platforms/512x/mpc5121_generic.c
+++ b/arch/powerpc/platforms/512x/mpc5121_generic.c
@@ -55,4 +55,5 @@ define_machine(mpc5121_generic) {
.init_IRQ = mpc512x_init_IRQ,
.get_irq = ipic_get_irq,
.calibrate_decr = generic_calibrate_decr,
+ .restart = mpc512x_restart,
};
diff --git a/arch/powerpc/platforms/512x/mpc512x.h b/arch/powerpc/platforms/512x/mpc512x.h
index 22a5352..c38875c 100644
--- a/arch/powerpc/platforms/512x/mpc512x.h
+++ b/arch/powerpc/platforms/512x/mpc512x.h
@@ -12,5 +12,6 @@
#ifndef __MPC512X_H__
#define __MPC512X_H__
extern void __init mpc512x_init_IRQ(void);
+extern void mpc512x_restart(char *cmd);
void __init mpc512x_declare_of_platform_devices(void);
#endif /* __MPC512X_H__ */
diff --git a/arch/powerpc/platforms/512x/mpc512x_shared.c b/arch/powerpc/platforms/512x/mpc512x_shared.c
index 434d683..4745028 100644
--- a/arch/powerpc/platforms/512x/mpc512x_shared.c
+++ b/arch/powerpc/platforms/512x/mpc512x_shared.c
@@ -21,9 +21,43 @@
#include <asm/ipic.h>
#include <asm/prom.h>
#include <asm/time.h>
+#include <asm/mpc5xxx.h>
#include "mpc512x.h"
+static struct mpc512x_reset_module __iomem *reset_module_base;
+
+static int __init mpc512x_restart_init(void)
+{
+ struct device_node *np;
+
+ np = of_find_compatible_node(NULL, NULL, "fsl,mpc5121-reset");
+ if (!np)
+ return -1;
+
+ reset_module_base = of_iomap(np, 0);
+ of_node_put(np);
+
+ return 0;
+}
+arch_initcall(mpc512x_restart_init);
+
+void mpc512x_restart(char *cmd)
+{
+ struct mpc512x_reset_module *rm = reset_module_base;
+
+ if (rm) {
+ /* Enable software reset "RSTE" */
+ out_be32(&rm->rpr, 0x52535445);
+ /* Set software hard reset */
+ out_be32(&rm->rcr, 0x2);
+ } else {
+ pr_err("Restart module not mapped.\n");
+ }
+ for (;;)
+ ;
+}
+
void __init mpc512x_init_IRQ(void)
{
struct device_node *np;
--
1.5.6.3
next prev parent reply other threads:[~2010-01-27 12:07 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-01-27 12:07 [PATCH 0/8] Update support for MPC512x Anatolij Gustschin
2010-01-27 12:07 ` Anatolij Gustschin [this message]
2010-01-27 15:46 ` [PATCH 1/8 v2] powerpc/mpc5121: Add machine restart support Grant Likely
2010-01-27 12:07 ` [PATCH 2/8 v2] rtc: Add MPC5121 Real time clock driver Anatolij Gustschin
2010-01-27 15:58 ` Grant Likely
2010-01-27 12:07 ` [PATCH 3/8 v2] mtd: Add MPC5121 NAND Flash Controller driver Anatolij Gustschin
2010-01-27 16:43 ` Grant Likely
2010-01-27 20:24 ` Wolfgang Denk
2010-01-27 12:07 ` [PATCH 4/8 v2] dma: Add MPC512x DMA driver Anatolij Gustschin
2010-01-27 12:07 ` [PATCH 5/8 v2] powerpc/mpc5121: add USB host support Anatolij Gustschin
2010-01-27 12:36 ` Jan Andersson
2010-01-27 15:45 ` Anatolij Gustschin
2010-01-27 16:54 ` Grant Likely
2010-01-27 12:07 ` [PATCH 6/8 v2] powerpc/mpc5121: shared DIU framebuffer support Anatolij Gustschin
2010-01-27 12:07 ` [PATCH 7/8 v2] powerpc/mpc5121: update mpc5121ads DTS Anatolij Gustschin
2010-01-27 12:07 ` [PATCH 8/8 v2] powerpc/mpc5121: Add default config for MPC5121 Anatolij Gustschin
2010-01-27 14:23 ` [PATCH 0/8] Update support for MPC512x Anatolij Gustschin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1264594052-20317-2-git-send-email-agust@denx.de \
--to=agust@denx.de \
--cc=dzu@denx.de \
--cc=kosmo@semihalf.com \
--cc=linuxppc-dev@ozlabs.org \
--cc=wd@denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).