From: Wolfgang Grandegger <wg@grandegger.com>
To: Linux-i2c@vger.kernel.org
Cc: Devicetree-discuss@lists.ozlabs.org,
Linuxppc-dev@lists.ozlabs.org, Wolfgang Grandegger <wg@denx.de>,
Ben Dooks <ben-linux@fluff.org>
Subject: [PATCH v7 1/4] i2c-mpc: use __devinit[data] for initialization functions and data
Date: Wed, 10 Feb 2010 15:55:08 +0100 [thread overview]
Message-ID: <1265813711-16794-2-git-send-email-wg@grandegger.com> (raw)
In-Reply-To: <1265813711-16794-1-git-send-email-wg@grandegger.com>
From: Wolfgang Grandegger <wg@denx.de>
"__devinit[data]" has not yet been used for all initialization functions
and data. To avoid truncating lines, the struct "mpc_i2c_match_data" has
been renamed to "mpc_i2c_data", which is even the better name.
Signed-off-by: Wolfgang Grandegger <wg@denx.de>
Tested-by: Wolfram Sang <w.sang@pengutronix.de>
---
drivers/i2c/busses/i2c-mpc.c | 99 +++++++++++++++++++----------------------
1 files changed, 46 insertions(+), 53 deletions(-)
diff --git a/drivers/i2c/busses/i2c-mpc.c b/drivers/i2c/busses/i2c-mpc.c
index f627001..9f0e203 100644
--- a/drivers/i2c/busses/i2c-mpc.c
+++ b/drivers/i2c/busses/i2c-mpc.c
@@ -66,7 +66,7 @@ struct mpc_i2c_divider {
u16 fdr; /* including dfsrr */
};
-struct mpc_i2c_match_data {
+struct mpc_i2c_data {
void (*setclock)(struct device_node *node,
struct mpc_i2c *i2c,
u32 clock, u32 prescaler);
@@ -165,7 +165,7 @@ static int i2c_wait(struct mpc_i2c *i2c, unsigned timeout, int writing)
}
#ifdef CONFIG_PPC_MPC52xx
-static const struct mpc_i2c_divider mpc_i2c_dividers_52xx[] = {
+static const struct mpc_i2c_divider mpc_i2c_dividers_52xx[] __devinitconst = {
{20, 0x20}, {22, 0x21}, {24, 0x22}, {26, 0x23},
{28, 0x24}, {30, 0x01}, {32, 0x25}, {34, 0x02},
{36, 0x26}, {40, 0x27}, {44, 0x04}, {48, 0x28},
@@ -186,7 +186,8 @@ static const struct mpc_i2c_divider mpc_i2c_dividers_52xx[] = {
{10240, 0x9d}, {12288, 0x9e}, {15360, 0x9f}
};
-int mpc_i2c_get_fdr_52xx(struct device_node *node, u32 clock, int prescaler)
+static int __devinit mpc_i2c_get_fdr_52xx(struct device_node *node, u32 clock,
+ int prescaler)
{
const struct mpc_i2c_divider *div = NULL;
unsigned int pvr = mfspr(SPRN_PVR);
@@ -215,9 +216,9 @@ int mpc_i2c_get_fdr_52xx(struct device_node *node, u32 clock, int prescaler)
return div ? (int)div->fdr : -EINVAL;
}
-static void mpc_i2c_setclock_52xx(struct device_node *node,
- struct mpc_i2c *i2c,
- u32 clock, u32 prescaler)
+static void __devinit mpc_i2c_setclock_52xx(struct device_node *node,
+ struct mpc_i2c *i2c,
+ u32 clock, u32 prescaler)
{
int ret, fdr;
@@ -230,15 +231,15 @@ static void mpc_i2c_setclock_52xx(struct device_node *node,
dev_info(i2c->dev, "clock %d Hz (fdr=%d)\n", clock, fdr);
}
#else /* !CONFIG_PPC_MPC52xx */
-static void mpc_i2c_setclock_52xx(struct device_node *node,
- struct mpc_i2c *i2c,
- u32 clock, u32 prescaler)
+static void __devinit mpc_i2c_setclock_52xx(struct device_node *node,
+ struct mpc_i2c *i2c,
+ u32 clock, u32 prescaler)
{
}
#endif /* CONFIG_PPC_MPC52xx*/
#ifdef CONFIG_FSL_SOC
-static const struct mpc_i2c_divider mpc_i2c_dividers_8xxx[] = {
+static const struct mpc_i2c_divider mpc_i2c_dividers_8xxx[] __devinitconst = {
{160, 0x0120}, {192, 0x0121}, {224, 0x0122}, {256, 0x0123},
{288, 0x0100}, {320, 0x0101}, {352, 0x0601}, {384, 0x0102},
{416, 0x0602}, {448, 0x0126}, {480, 0x0103}, {512, 0x0127},
@@ -258,7 +259,7 @@ static const struct mpc_i2c_divider mpc_i2c_dividers_8xxx[] = {
{49152, 0x011e}, {61440, 0x011f}
};
-u32 mpc_i2c_get_sec_cfg_8xxx(void)
+static u32 __devinit mpc_i2c_get_sec_cfg_8xxx(void)
{
struct device_node *node = NULL;
u32 __iomem *reg;
@@ -287,7 +288,8 @@ u32 mpc_i2c_get_sec_cfg_8xxx(void)
return val;
}
-int mpc_i2c_get_fdr_8xxx(struct device_node *node, u32 clock, u32 prescaler)
+static int __devinit mpc_i2c_get_fdr_8xxx(struct device_node *node, u32 clock,
+ u32 prescaler)
{
const struct mpc_i2c_divider *div = NULL;
u32 divider;
@@ -320,9 +322,9 @@ int mpc_i2c_get_fdr_8xxx(struct device_node *node, u32 clock, u32 prescaler)
return div ? (int)div->fdr : -EINVAL;
}
-static void mpc_i2c_setclock_8xxx(struct device_node *node,
- struct mpc_i2c *i2c,
- u32 clock, u32 prescaler)
+static void __devinit mpc_i2c_setclock_8xxx(struct device_node *node,
+ struct mpc_i2c *i2c,
+ u32 clock, u32 prescaler)
{
int ret, fdr;
@@ -338,9 +340,9 @@ static void mpc_i2c_setclock_8xxx(struct device_node *node,
}
#else /* !CONFIG_FSL_SOC */
-static void mpc_i2c_setclock_8xxx(struct device_node *node,
- struct mpc_i2c *i2c,
- u32 clock, u32 prescaler)
+static void __devinit mpc_i2c_setclock_8xxx(struct device_node *node,
+ struct mpc_i2c *i2c,
+ u32 clock, u32 prescaler)
{
}
#endif /* CONFIG_FSL_SOC */
@@ -529,8 +531,8 @@ static int __devinit fsl_i2c_probe(struct of_device *op,
clock = *prop;
if (match->data) {
- struct mpc_i2c_match_data *data =
- (struct mpc_i2c_match_data *)match->data;
+ struct mpc_i2c_data *data =
+ (struct mpc_i2c_data *)match->data;
data->setclock(op->node, i2c, clock, data->prescaler);
} else {
/* Backwards compatibility */
@@ -582,44 +584,35 @@ static int __devexit fsl_i2c_remove(struct of_device *op)
return 0;
};
+static struct mpc_i2c_data mpc_i2c_data_52xx __devinitdata = {
+ .setup = mpc_i2c_setup_52xx,
+};
+
+static struct mpc_i2c_data mpc_i2c_data_8313 __devinitdata = {
+ .setup = mpc_i2c_setup_8xxx,
+};
+
+static struct mpc_i2c_data mpc_i2c_data_8543 __devinitdata = {
+ .setup = mpc_i2c_setup_8xxx,
+ .prescaler = 2,
+};
+
+static struct mpc_i2c_data mpc_i2c_data_8544 __devinitdata = {
+ .setup = mpc_i2c_setup_8xxx,
+ .prescaler = 3,
+};
+
static const struct of_device_id mpc_i2c_of_match[] = {
- {.compatible = "mpc5200-i2c",
- .data = &(struct mpc_i2c_match_data) {
- .setclock = mpc_i2c_setclock_52xx,
- },
- },
- {.compatible = "fsl,mpc5200b-i2c",
- .data = &(struct mpc_i2c_match_data) {
- .setclock = mpc_i2c_setclock_52xx,
- },
- },
- {.compatible = "fsl,mpc5200-i2c",
- .data = &(struct mpc_i2c_match_data) {
- .setclock = mpc_i2c_setclock_52xx,
- },
- },
- {.compatible = "fsl,mpc8313-i2c",
- .data = &(struct mpc_i2c_match_data) {
- .setclock = mpc_i2c_setclock_8xxx,
- },
- },
- {.compatible = "fsl,mpc8543-i2c",
- .data = &(struct mpc_i2c_match_data) {
- .setclock = mpc_i2c_setclock_8xxx,
- .prescaler = 2,
- },
- },
- {.compatible = "fsl,mpc8544-i2c",
- .data = &(struct mpc_i2c_match_data) {
- .setclock = mpc_i2c_setclock_8xxx,
- .prescaler = 3,
- },
+ {.compatible = "mpc5200-i2c", .data = &mpc_i2c_data_52xx, },
+ {.compatible = "fsl,mpc5200b-i2c", .data = &mpc_i2c_data_52xx, },
+ {.compatible = "fsl,mpc5200-i2c", .data = &mpc_i2c_data_52xx, },
+ {.compatible = "fsl,mpc8313-i2c", .data = &mpc_i2c_data_8313, },
+ {.compatible = "fsl,mpc8543-i2c", .data = &mpc_i2c_data_8543, },
+ {.compatible = "fsl,mpc8544-i2c", .data = &mpc_i2c_data_8544, },
/* Backward compatibility */
- },
{.compatible = "fsl-i2c", },
{},
};
-
MODULE_DEVICE_TABLE(of, mpc_i2c_of_match);
--
1.6.2.5
next prev parent reply other threads:[~2010-02-10 14:55 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-02-10 14:55 [PATCH v7 0/4] i2c-mpc: add support for the Freescale MPC512x and other fixes Wolfgang Grandegger
2010-02-10 14:55 ` Wolfgang Grandegger [this message]
2010-02-10 14:55 ` [PATCH v7 2/4] i2c-mpc: rename "setclock" initialization functions to "setup" Wolfgang Grandegger
2010-02-10 14:55 ` [PATCH v7 3/4] i2c-mpc: add support for the MPC512x processors from Freescale Wolfgang Grandegger
2010-02-10 14:55 ` [PATCH v7 4/4] powerpc: doc/dts-bindings: update doc of FSL I2C bindings Wolfgang Grandegger
2010-02-16 18:40 ` [PATCH v7 1/4] i2c-mpc: use __devinit[data] for initialization functions and data Grant Likely
2010-02-16 20:49 ` Wolfgang Grandegger
2010-02-15 19:34 ` [PATCH v7 0/4] i2c-mpc: add support for the Freescale MPC512x and other fixes Grant Likely
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1265813711-16794-2-git-send-email-wg@grandegger.com \
--to=wg@grandegger.com \
--cc=Devicetree-discuss@lists.ozlabs.org \
--cc=Linux-i2c@vger.kernel.org \
--cc=Linuxppc-dev@lists.ozlabs.org \
--cc=ben-linux@fluff.org \
--cc=wg@denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).