From: Mingkai Hu <Mingkai.hu@freescale.com>
To: linuxppc-dev@ozlabs.org, spi-devel-general@lists.sourceforge.net
Cc: kumar.gala@freescale.com, Mingkai Hu <Mingkai.hu@freescale.com>
Subject: [PATCH v2 6/6] DTS: add SPI flash(s25fl128p01) support on p4080ds and mpc8536ds board
Date: Mon, 2 Aug 2010 15:52:04 +0800 [thread overview]
Message-ID: <1280735524-17547-7-git-send-email-Mingkai.hu@freescale.com> (raw)
In-Reply-To: <1280735524-17547-6-git-send-email-Mingkai.hu@freescale.com>
Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com>
---
v2:
- Remove the whitespace inconsitencies
arch/powerpc/boot/dts/mpc8536ds.dts | 52 +++++++++++++++++++++++++++++++++++
arch/powerpc/boot/dts/p4080ds.dts | 11 +++-----
2 files changed, 56 insertions(+), 7 deletions(-)
diff --git a/arch/powerpc/boot/dts/mpc8536ds.dts b/arch/powerpc/boot/dts/mpc8536ds.dts
index 815cebb..a75c10e 100644
--- a/arch/powerpc/boot/dts/mpc8536ds.dts
+++ b/arch/powerpc/boot/dts/mpc8536ds.dts
@@ -108,6 +108,58 @@
};
};
+ spi@7000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,mpc8536-espi";
+ reg = <0x7000 0x1000>;
+ interrupts = <59 0x2>;
+ interrupt-parent = <&mpic>;
+ fsl,espi-num-chipselects = <4>;
+
+ flash@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "spansion,s25sl12801";
+ reg = <0>;
+ spi-max-frequency = <40000000>;
+ partition@u-boot {
+ label = "u-boot";
+ reg = <0x00000000 0x00100000>;
+ read-only;
+ };
+ partition@kernel {
+ label = "kernel";
+ reg = <0x00100000 0x00500000>;
+ read-only;
+ };
+ partition@dtb {
+ label = "dtb";
+ reg = <0x00600000 0x00100000>;
+ read-only;
+ };
+ partition@fs {
+ label = "file system";
+ reg = <0x00700000 0x00900000>;
+ };
+ };
+ flash@1 {
+ compatible = "spansion,s25sl12801";
+ reg = <1>;
+ spi-max-frequency = <40000000>;
+ };
+ flash@2 {
+ compatible = "spansion,s25sl12801";
+ reg = <2>;
+ spi-max-frequency = <40000000>;
+ };
+ flash@3 {
+ compatible = "spansion,s25sl12801";
+ reg = <3>;
+ spi-max-frequency = <40000000>;
+ };
+ };
+
dma@21300 {
#address-cells = <1>;
#size-cells = <1>;
diff --git a/arch/powerpc/boot/dts/p4080ds.dts b/arch/powerpc/boot/dts/p4080ds.dts
index 6b29eab..48437ad 100644
--- a/arch/powerpc/boot/dts/p4080ds.dts
+++ b/arch/powerpc/boot/dts/p4080ds.dts
@@ -236,22 +236,19 @@
};
spi@110000 {
- cell-index = <0>;
#address-cells = <1>;
#size-cells = <0>;
- compatible = "fsl,espi";
+ compatible = "fsl,mpc8536-espi";
reg = <0x110000 0x1000>;
interrupts = <53 0x2>;
interrupt-parent = <&mpic>;
- espi,num-ss-bits = <4>;
- mode = "cpu";
+ fsl,espi-num-chipselects = <4>;
- fsl_m25p80@0 {
+ flash@0 {
#address-cells = <1>;
#size-cells = <1>;
- compatible = "fsl,espi-flash";
+ compatible = "spansion,s25sl12801";
reg = <0>;
- linux,modalias = "fsl_m25p80";
spi-max-frequency = <40000000>; /* input clock */
partition@u-boot {
label = "u-boot";
--
1.6.4
next prev parent reply other threads:[~2010-08-02 8:22 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-08-02 7:51 [PATCH v2 0/6] refactor spi_mpc8xxx.c and add eSPI controller support Mingkai Hu
2010-08-02 7:51 ` [PATCH v2 1/6] spi/mpc8xxx: refactor the common code for SPI/eSPI controller Mingkai Hu
2010-08-02 7:52 ` [PATCH v2 2/6] eSPI: add eSPI controller support Mingkai Hu
2010-08-02 7:52 ` [PATCH v2 3/6] mtd: m25p80: add support to parse the SPI flash's partitions Mingkai Hu
2010-08-02 7:52 ` [PATCH v2 4/6] mtd: m25p80: add a read function to read page by page Mingkai Hu
2010-08-02 7:52 ` [PATCH v2 5/6] powerpc/of: add eSPI controller dts bindings Mingkai Hu
2010-08-02 7:52 ` Mingkai Hu [this message]
2010-08-10 7:10 ` [PATCH v2 6/6] DTS: add SPI flash(s25fl128p01) support on p4080ds and mpc8536ds board Grant Likely
2010-09-02 8:30 ` Hu Mingkai-B21284
2010-08-10 7:00 ` [PATCH v2 4/6] mtd: m25p80: add a read function to read page by page Grant Likely
2010-08-10 13:44 ` [spi-devel-general] " David Brownell
2010-09-02 9:04 ` Hu Mingkai-B21284
2010-08-10 6:56 ` [PATCH v2 3/6] mtd: m25p80: add support to parse the SPI flash's partitions Grant Likely
2010-08-10 7:14 ` [spi-devel-general] " David Brownell
2010-08-10 7:16 ` Grant Likely
2010-08-10 6:44 ` [PATCH v2 2/6] eSPI: add eSPI controller support Grant Likely
2010-09-02 8:28 ` Hu Mingkai-B21284
2010-08-10 6:40 ` [PATCH v2 1/6] spi/mpc8xxx: refactor the common code for SPI/eSPI controller Grant Likely
2010-09-02 8:27 ` Hu Mingkai-B21284
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1280735524-17547-7-git-send-email-Mingkai.hu@freescale.com \
--to=mingkai.hu@freescale.com \
--cc=kumar.gala@freescale.com \
--cc=linuxppc-dev@ozlabs.org \
--cc=spi-devel-general@lists.sourceforge.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox