linuxppc-dev.lists.ozlabs.org archive mirror
 help / color / mirror / Atom feed
From: Anatolij Gustschin <agust@denx.de>
To: linuxppc-dev@ozlabs.org
Cc: Anatolij Gustschin <agust@denx.de>, Wolfgang Denk <wd@denx.de>,
	Detlev Zundel <dzu@denx.de>
Subject: [PATCH] powerpc/mpc8xxx_gpio.c: extend the driver to support mpc512x gpios
Date: Sat,  7 Aug 2010 15:28:31 +0200	[thread overview]
Message-ID: <1281187711-10215-1-git-send-email-agust@denx.de> (raw)
In-Reply-To: <87iq4r5y4q.fsf@macbook.be.48ers.dk>

Signed-off-by: Anatolij Gustschin <agust@denx.de>
---
 arch/powerpc/platforms/Kconfig     |    7 ++--
 arch/powerpc/sysdev/mpc8xxx_gpio.c |   54 +++++++++++++++++++++++++++++++++++-
 2 files changed, 57 insertions(+), 4 deletions(-)

diff --git a/arch/powerpc/platforms/Kconfig b/arch/powerpc/platforms/Kconfig
index d1663db..471115a 100644
--- a/arch/powerpc/platforms/Kconfig
+++ b/arch/powerpc/platforms/Kconfig
@@ -304,13 +304,14 @@ config OF_RTC
 source "arch/powerpc/sysdev/bestcomm/Kconfig"
 
 config MPC8xxx_GPIO
-	bool "MPC8xxx GPIO support"
-	depends on PPC_MPC831x || PPC_MPC834x || PPC_MPC837x || FSL_SOC_BOOKE || PPC_86xx
+	bool "MPC512x/MPC8xxx GPIO support"
+	depends on PPC_MPC512x || PPC_MPC831x || PPC_MPC834x || PPC_MPC837x || \
+		   FSL_SOC_BOOKE || PPC_86xx
 	select GENERIC_GPIO
 	select ARCH_REQUIRE_GPIOLIB
 	help
 	  Say Y here if you're going to use hardware that connects to the
-	  MPC831x/834x/837x/8572/8610 GPIOs.
+	  MPC512x/831x/834x/837x/8572/8610 GPIOs.
 
 config SIMPLE_GPIO
 	bool "Support for simple, memory-mapped GPIO controllers"
diff --git a/arch/powerpc/sysdev/mpc8xxx_gpio.c b/arch/powerpc/sysdev/mpc8xxx_gpio.c
index 2b69084..f5b4959 100644
--- a/arch/powerpc/sysdev/mpc8xxx_gpio.c
+++ b/arch/powerpc/sysdev/mpc8xxx_gpio.c
@@ -1,5 +1,5 @@
 /*
- * GPIOs on MPC8349/8572/8610 and compatible
+ * GPIOs on MPC512x/8349/8572/8610 and compatible
  *
  * Copyright (C) 2008 Peter Korsgaard <jacmet@sunsite.dk>
  *
@@ -26,6 +26,7 @@
 #define GPIO_IER		0x0c
 #define GPIO_IMR		0x10
 #define GPIO_ICR		0x14
+#define GPIO_ICR2		0x18
 
 struct mpc8xxx_gpio_chip {
 	struct of_mm_gpio_chip mm_gc;
@@ -215,6 +216,51 @@ static int mpc8xxx_irq_set_type(unsigned int virq, unsigned int flow_type)
 	return 0;
 }
 
+static int mpc512x_irq_set_type(unsigned int virq, unsigned int flow_type)
+{
+	struct mpc8xxx_gpio_chip *mpc8xxx_gc = get_irq_chip_data(virq);
+	struct of_mm_gpio_chip *mm = &mpc8xxx_gc->mm_gc;
+	unsigned long gpio = virq_to_hw(virq);
+	void __iomem *reg;
+	unsigned int shift;
+	unsigned long flags;
+
+	if (gpio < 16) {
+		reg = mm->regs + GPIO_ICR;
+		shift = (15 - gpio) * 2;
+	} else {
+		reg = mm->regs + GPIO_ICR2;
+		shift = (15 - (gpio % 16)) * 2;
+	}
+
+	switch (flow_type) {
+	case IRQ_TYPE_EDGE_FALLING:
+	case IRQ_TYPE_LEVEL_LOW:
+		spin_lock_irqsave(&mpc8xxx_gc->lock, flags);
+		clrsetbits_be32(reg, 3 << shift, 2 << shift);
+		spin_unlock_irqrestore(&mpc8xxx_gc->lock, flags);
+		break;
+
+	case IRQ_TYPE_EDGE_RISING:
+	case IRQ_TYPE_LEVEL_HIGH:
+		spin_lock_irqsave(&mpc8xxx_gc->lock, flags);
+		clrsetbits_be32(reg, 3 << shift, 1 << shift);
+		spin_unlock_irqrestore(&mpc8xxx_gc->lock, flags);
+		break;
+
+	case IRQ_TYPE_EDGE_BOTH:
+		spin_lock_irqsave(&mpc8xxx_gc->lock, flags);
+		clrbits32(reg, 3 << shift);
+		spin_unlock_irqrestore(&mpc8xxx_gc->lock, flags);
+		break;
+
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
 static struct irq_chip mpc8xxx_irq_chip = {
 	.name		= "mpc8xxx-gpio",
 	.unmask		= mpc8xxx_irq_unmask,
@@ -226,6 +272,9 @@ static struct irq_chip mpc8xxx_irq_chip = {
 static int mpc8xxx_gpio_irq_map(struct irq_host *h, unsigned int virq,
 				irq_hw_number_t hw)
 {
+	if (of_device_is_compatible(h->of_node, "fsl,mpc5121-gpio"))
+		mpc8xxx_irq_chip.set_type = mpc512x_irq_set_type;
+
 	set_irq_chip_data(virq, h->host_data);
 	set_irq_chip_and_handler(virq, &mpc8xxx_irq_chip, handle_level_irq);
 	set_irq_type(virq, IRQ_TYPE_NONE);
@@ -330,6 +379,9 @@ static int __init mpc8xxx_add_gpiochips(void)
 	for_each_compatible_node(np, NULL, "fsl,mpc8610-gpio")
 		mpc8xxx_add_controller(np);
 
+	for_each_compatible_node(np, NULL, "fsl,mpc5121-gpio")
+		mpc8xxx_add_controller(np);
+
 	return 0;
 }
 arch_initcall(mpc8xxx_add_gpiochips);
-- 
1.7.0.4

  parent reply	other threads:[~2010-08-07 13:28 UTC|newest]

Thread overview: 21+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2010-06-10 16:05 [PATCH V3] powerpc/mpc512x: Add gpio driver Anatolij Gustschin
2010-06-10 16:21 ` [PATCH V4] " Anatolij Gustschin
2010-06-10 21:48   ` Grant Likely
2010-06-10 22:01     ` Anatolij Gustschin
2010-06-11  8:35     ` [PATCH V5] " Anatolij Gustschin
2010-07-07 11:28       ` Peter Korsgaard
2010-07-29  7:19         ` Grant Likely
2010-07-29  7:39           ` Anatolij Gustschin
2010-08-07 13:28         ` Anatolij Gustschin [this message]
2010-08-07 15:12           ` [PATCH] powerpc/mpc8xxx_gpio.c: extend the driver to support mpc512x gpios Grant Likely
2010-08-07 16:39             ` Anatolij Gustschin
2010-08-07 16:58               ` Grant Likely
2010-08-07 19:03           ` [PATCH v2] " Anatolij Gustschin
2010-08-08  0:40             ` Grant Likely
2010-08-08  7:40               ` Anton Vorontsov
2010-08-09  5:31                 ` Grant Likely
2010-08-09  5:20             ` [PATCH v3] " Anatolij Gustschin
2010-08-09  5:58               ` [PATCH v4] " Anatolij Gustschin
2010-08-09  6:20                 ` Grant Likely
2010-08-20  7:00                 ` Peter Korsgaard
2010-09-10 19:31                 ` Grant Likely

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1281187711-10215-1-git-send-email-agust@denx.de \
    --to=agust@denx.de \
    --cc=dzu@denx.de \
    --cc=linuxppc-dev@ozlabs.org \
    --cc=wd@denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).