From: Nishanth Aravamudan <nacc@us.ibm.com>
To: nacc@us.ibm.com
Cc: linuxppc-dev@lists.ozlabs.org, Milton Miller <miltonm@bga.com>,
Paul Mackerras <paulus@samba.org>,
Olof Johansson <olof@lixom.net>, Yinghai Lu <yinghai@kernel.org>
Subject: [PATCH 10/15] ppc/pasemi: clean up pasemi iommu table initializations
Date: Wed, 15 Sep 2010 11:05:53 -0700 [thread overview]
Message-ID: <1284573958-8397-11-git-send-email-nacc@us.ibm.com> (raw)
In-Reply-To: <1284573958-8397-1-git-send-email-nacc@us.ibm.com>
No need for empty helpers with iommu off, the ppc_md hooks are optional.
The direct_dma_ops are the default pci_dma_ops, so no need to set in the
them iommu off case.
No need to set the device tree device_node pci node iommu pointer, its
only used for dlpar remove.
Signed-off-by: Milton Miller <miltonm@bga.com>
Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com>
---
arch/powerpc/platforms/pasemi/iommu.c | 19 +------------------
1 files changed, 1 insertions(+), 18 deletions(-)
diff --git a/arch/powerpc/platforms/pasemi/iommu.c b/arch/powerpc/platforms/pasemi/iommu.c
index 1f9fb2c..14943ef 100644
--- a/arch/powerpc/platforms/pasemi/iommu.c
+++ b/arch/powerpc/platforms/pasemi/iommu.c
@@ -156,20 +156,12 @@ static void iommu_table_iobmap_setup(void)
static void pci_dma_bus_setup_pasemi(struct pci_bus *bus)
{
- struct device_node *dn;
-
pr_debug("pci_dma_bus_setup, bus %p, bus->self %p\n", bus, bus->self);
if (!iommu_table_iobmap_inited) {
iommu_table_iobmap_inited = 1;
iommu_table_iobmap_setup();
}
-
- dn = pci_bus_to_OF_node(bus);
-
- if (dn)
- PCI_DN(dn)->iommu_table = &iommu_table_iobmap;
-
}
@@ -192,9 +184,6 @@ static void pci_dma_dev_setup_pasemi(struct pci_dev *dev)
set_iommu_table_base(&dev->dev, &iommu_table_iobmap);
}
-static void pci_dma_bus_setup_null(struct pci_bus *b) { }
-static void pci_dma_dev_setup_null(struct pci_dev *d) { }
-
int __init iob_init(struct device_node *dn)
{
unsigned long tmp;
@@ -251,14 +240,8 @@ void __init iommu_init_early_pasemi(void)
iommu_off = of_chosen &&
of_get_property(of_chosen, "linux,iommu-off", NULL);
#endif
- if (iommu_off) {
- /* Direct I/O, IOMMU off */
- ppc_md.pci_dma_dev_setup = pci_dma_dev_setup_null;
- ppc_md.pci_dma_bus_setup = pci_dma_bus_setup_null;
- set_pci_dma_ops(&dma_direct_ops);
-
+ if (iommu_off)
return;
- }
iob_init(NULL);
--
1.7.0.4
next prev parent reply other threads:[~2010-09-15 18:06 UTC|newest]
Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <1284573958-8397-1-git-send-email-nacc@us.ibm.com>
2010-09-15 18:05 ` [PATCH 02/15] ppc64: fix dma_iommu_dma_supported compare Nishanth Aravamudan
2010-09-15 18:05 ` [PATCH 03/15] ppc64 iommu: fix check for direct DMA support Nishanth Aravamudan
2010-09-15 18:05 ` [PATCH 04/15] vio: put device on device_register failure Nishanth Aravamudan
2010-09-15 18:29 ` Grant Likely
2010-09-15 18:05 ` [PATCH 05/15] viobus: free TCE table on device release Nishanth Aravamudan
2010-09-15 18:05 ` [PATCH 06/15] pseries/dlpar: use kmemdup Nishanth Aravamudan
2010-09-15 18:05 ` [PATCH 07/15] ppc: pci-common cleanup Nishanth Aravamudan
2010-09-15 18:30 ` Grant Likely
2010-09-15 18:05 ` [PATCH 09/15] ppc/vio: use dma ops helpers Nishanth Aravamudan
2010-09-15 18:33 ` Grant Likely
2010-10-13 4:56 ` Benjamin Herrenschmidt
2010-10-13 17:43 ` Nishanth Aravamudan
2010-09-15 18:05 ` Nishanth Aravamudan [this message]
2010-09-15 18:29 ` [PATCH 10/15] ppc/pasemi: clean up pasemi iommu table initializations Olof Johansson
2010-09-15 18:05 ` [PATCH 11/15] ppc/cell: beat dma ops cleanup Nishanth Aravamudan
2010-09-16 11:23 ` Arnd Bergmann
2010-09-15 18:05 ` [PATCH 12/15] ppc/dart: iommu table cleanup Nishanth Aravamudan
2010-09-15 18:05 ` [PATCH 13/15] ppc/pseries: iommu cleanup Nishanth Aravamudan
2010-09-15 18:34 ` Grant Likely
2010-09-15 18:05 ` [PATCH 14/15] ppc64 iommu: use coherent_dma_mask for alloc_coherent Nishanth Aravamudan
2010-11-29 0:58 ` Benjamin Herrenschmidt
2010-12-01 0:31 ` Nishanth Aravamudan
2010-09-15 18:05 ` [PATCH 15/15] ppc/vio: ensure dma_coherent_mask is set Nishanth Aravamudan
2010-09-15 18:37 ` Grant Likely
2010-09-15 18:44 ` Nishanth Aravamudan
2010-09-15 18:49 ` Grant Likely
2010-11-29 1:02 ` Benjamin Herrenschmidt
2010-11-29 19:46 ` Nishanth Aravamudan
2010-11-29 20:25 ` Benjamin Herrenschmidt
2010-09-15 18:13 ` [PATCH 01/15] ppc: fix return type of BUID_{HI,LO} macros Nishanth Aravamudan
2010-09-16 22:54 ` Linas Vepstas
2010-09-16 23:04 ` Scott Wood
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1284573958-8397-11-git-send-email-nacc@us.ibm.com \
--to=nacc@us.ibm.com \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=miltonm@bga.com \
--cc=olof@lixom.net \
--cc=paulus@samba.org \
--cc=yinghai@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).