From: Anatolij Gustschin <agust@denx.de>
To: linux-usb@vger.kernel.org
Cc: David Brownell <dbrownell@users.sourceforge.net>,
Wolfgang Denk <wd@denx.de>, Detlev Zundel <dzu@denx.de>,
Greg Kroah-Hartman <gregkh@suse.de>,
linuxppc-dev@ozlabs.org, Anatolij Gustschin <agust@denx.de>
Subject: [PATCH v3 1/2] USB: add platform glue driver for FSL USB DR controller
Date: Tue, 28 Sep 2010 20:55:20 +0200 [thread overview]
Message-ID: <1285700121-9991-2-git-send-email-agust@denx.de> (raw)
In-Reply-To: <1285666594-21150-1-git-send-email-agust@denx.de>
Replace FSL USB platform code by simple platform driver for
creation of FSL USB platform devices.
The driver creates platform devices based on the information
from USB nodes in the flat device tree. This is the replacement
for old arch fsl_soc usb code removed by this patch. The driver
uses usual of-style binding, available EHCI-HCD and UDC
drivers can be bound to the created devices. The new of-style
driver additionaly instantiates USB OTG platform device, as the
appropriate USB OTG driver will be added soon.
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Cc: Kumar Gala <galak@kernel.crashing.org>
Cc: Grant Likely <grant.likely@secretlab.ca>
---
v3:
- merged patches 1/3 and 2/3 of the previous version
- changed to platform_driver as requested
- fixed probe() to avoid modification of driver's
shared platform data struct pointed to by 'data' in
the match table which is added by the next patch of
the series
arch/powerpc/sysdev/fsl_soc.c | 163 ----------------------------
drivers/usb/gadget/Kconfig | 1 +
drivers/usb/host/Kconfig | 4 +
drivers/usb/host/Makefile | 1 +
drivers/usb/host/fsl-mph-dr-of.c | 219 ++++++++++++++++++++++++++++++++++++++
5 files changed, 225 insertions(+), 163 deletions(-)
create mode 100644 drivers/usb/host/fsl-mph-dr-of.c
diff --git a/arch/powerpc/sysdev/fsl_soc.c b/arch/powerpc/sysdev/fsl_soc.c
index b91f7ac..49a51f1 100644
--- a/arch/powerpc/sysdev/fsl_soc.c
+++ b/arch/powerpc/sysdev/fsl_soc.c
@@ -209,169 +209,6 @@ static int __init of_add_fixed_phys(void)
arch_initcall(of_add_fixed_phys);
#endif /* CONFIG_FIXED_PHY */
-static enum fsl_usb2_phy_modes determine_usb_phy(const char *phy_type)
-{
- if (!phy_type)
- return FSL_USB2_PHY_NONE;
- if (!strcasecmp(phy_type, "ulpi"))
- return FSL_USB2_PHY_ULPI;
- if (!strcasecmp(phy_type, "utmi"))
- return FSL_USB2_PHY_UTMI;
- if (!strcasecmp(phy_type, "utmi_wide"))
- return FSL_USB2_PHY_UTMI_WIDE;
- if (!strcasecmp(phy_type, "serial"))
- return FSL_USB2_PHY_SERIAL;
-
- return FSL_USB2_PHY_NONE;
-}
-
-static int __init fsl_usb_of_init(void)
-{
- struct device_node *np;
- unsigned int i = 0;
- struct platform_device *usb_dev_mph = NULL, *usb_dev_dr_host = NULL,
- *usb_dev_dr_client = NULL;
- int ret;
-
- for_each_compatible_node(np, NULL, "fsl-usb2-mph") {
- struct resource r[2];
- struct fsl_usb2_platform_data usb_data;
- const unsigned char *prop = NULL;
-
- memset(&r, 0, sizeof(r));
- memset(&usb_data, 0, sizeof(usb_data));
-
- ret = of_address_to_resource(np, 0, &r[0]);
- if (ret)
- goto err;
-
- of_irq_to_resource(np, 0, &r[1]);
-
- usb_dev_mph =
- platform_device_register_simple("fsl-ehci", i, r, 2);
- if (IS_ERR(usb_dev_mph)) {
- ret = PTR_ERR(usb_dev_mph);
- goto err;
- }
-
- usb_dev_mph->dev.coherent_dma_mask = 0xffffffffUL;
- usb_dev_mph->dev.dma_mask = &usb_dev_mph->dev.coherent_dma_mask;
-
- usb_data.operating_mode = FSL_USB2_MPH_HOST;
-
- prop = of_get_property(np, "port0", NULL);
- if (prop)
- usb_data.port_enables |= FSL_USB2_PORT0_ENABLED;
-
- prop = of_get_property(np, "port1", NULL);
- if (prop)
- usb_data.port_enables |= FSL_USB2_PORT1_ENABLED;
-
- prop = of_get_property(np, "phy_type", NULL);
- usb_data.phy_mode = determine_usb_phy(prop);
-
- ret =
- platform_device_add_data(usb_dev_mph, &usb_data,
- sizeof(struct
- fsl_usb2_platform_data));
- if (ret)
- goto unreg_mph;
- i++;
- }
-
- for_each_compatible_node(np, NULL, "fsl-usb2-dr") {
- struct resource r[2];
- struct fsl_usb2_platform_data usb_data;
- const unsigned char *prop = NULL;
-
- if (!of_device_is_available(np))
- continue;
-
- memset(&r, 0, sizeof(r));
- memset(&usb_data, 0, sizeof(usb_data));
-
- ret = of_address_to_resource(np, 0, &r[0]);
- if (ret)
- goto unreg_mph;
-
- of_irq_to_resource(np, 0, &r[1]);
-
- prop = of_get_property(np, "dr_mode", NULL);
-
- if (!prop || !strcmp(prop, "host")) {
- usb_data.operating_mode = FSL_USB2_DR_HOST;
- usb_dev_dr_host = platform_device_register_simple(
- "fsl-ehci", i, r, 2);
- if (IS_ERR(usb_dev_dr_host)) {
- ret = PTR_ERR(usb_dev_dr_host);
- goto err;
- }
- } else if (prop && !strcmp(prop, "peripheral")) {
- usb_data.operating_mode = FSL_USB2_DR_DEVICE;
- usb_dev_dr_client = platform_device_register_simple(
- "fsl-usb2-udc", i, r, 2);
- if (IS_ERR(usb_dev_dr_client)) {
- ret = PTR_ERR(usb_dev_dr_client);
- goto err;
- }
- } else if (prop && !strcmp(prop, "otg")) {
- usb_data.operating_mode = FSL_USB2_DR_OTG;
- usb_dev_dr_host = platform_device_register_simple(
- "fsl-ehci", i, r, 2);
- if (IS_ERR(usb_dev_dr_host)) {
- ret = PTR_ERR(usb_dev_dr_host);
- goto err;
- }
- usb_dev_dr_client = platform_device_register_simple(
- "fsl-usb2-udc", i, r, 2);
- if (IS_ERR(usb_dev_dr_client)) {
- ret = PTR_ERR(usb_dev_dr_client);
- goto err;
- }
- } else {
- ret = -EINVAL;
- goto err;
- }
-
- prop = of_get_property(np, "phy_type", NULL);
- usb_data.phy_mode = determine_usb_phy(prop);
-
- if (usb_dev_dr_host) {
- usb_dev_dr_host->dev.coherent_dma_mask = 0xffffffffUL;
- usb_dev_dr_host->dev.dma_mask = &usb_dev_dr_host->
- dev.coherent_dma_mask;
- if ((ret = platform_device_add_data(usb_dev_dr_host,
- &usb_data, sizeof(struct
- fsl_usb2_platform_data))))
- goto unreg_dr;
- }
- if (usb_dev_dr_client) {
- usb_dev_dr_client->dev.coherent_dma_mask = 0xffffffffUL;
- usb_dev_dr_client->dev.dma_mask = &usb_dev_dr_client->
- dev.coherent_dma_mask;
- if ((ret = platform_device_add_data(usb_dev_dr_client,
- &usb_data, sizeof(struct
- fsl_usb2_platform_data))))
- goto unreg_dr;
- }
- i++;
- }
- return 0;
-
-unreg_dr:
- if (usb_dev_dr_host)
- platform_device_unregister(usb_dev_dr_host);
- if (usb_dev_dr_client)
- platform_device_unregister(usb_dev_dr_client);
-unreg_mph:
- if (usb_dev_mph)
- platform_device_unregister(usb_dev_mph);
-err:
- return ret;
-}
-
-arch_initcall(fsl_usb_of_init);
-
#if defined(CONFIG_FSL_SOC_BOOKE) || defined(CONFIG_PPC_86xx)
static __be32 __iomem *rstcr;
diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig
index fab765d..0fe5bc8 100644
--- a/drivers/usb/gadget/Kconfig
+++ b/drivers/usb/gadget/Kconfig
@@ -158,6 +158,7 @@ config USB_GADGET_FSL_USB2
boolean "Freescale Highspeed USB DR Peripheral Controller"
depends on FSL_SOC || ARCH_MXC
select USB_GADGET_DUALSPEED
+ select USB_FSL_MPH_DR_OF
help
Some of Freescale PowerPC processors have a High Speed
Dual-Role(DR) USB controller, which supports device mode.
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index 2d926ce..f3a90b0 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -112,10 +112,14 @@ config XPS_USB_HCD_XILINX
support both high speed and full speed devices, or high speed
devices only.
+config USB_FSL_MPH_DR_OF
+ tristate
+
config USB_EHCI_FSL
bool "Support for Freescale on-chip EHCI USB controller"
depends on USB_EHCI_HCD && FSL_SOC
select USB_EHCI_ROOT_HUB_TT
+ select USB_FSL_MPH_DR_OF
---help---
Variation of ARC USB block used in some Freescale chips.
diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile
index b6315aa..aacbe82 100644
--- a/drivers/usb/host/Makefile
+++ b/drivers/usb/host/Makefile
@@ -33,4 +33,5 @@ obj-$(CONFIG_USB_R8A66597_HCD) += r8a66597-hcd.o
obj-$(CONFIG_USB_ISP1760_HCD) += isp1760.o
obj-$(CONFIG_USB_HWA_HCD) += hwa-hc.o
obj-$(CONFIG_USB_IMX21_HCD) += imx21-hcd.o
+obj-$(CONFIG_USB_FSL_MPH_DR_OF) += fsl-mph-dr-of.o
diff --git a/drivers/usb/host/fsl-mph-dr-of.c b/drivers/usb/host/fsl-mph-dr-of.c
new file mode 100644
index 0000000..12db5d5
--- /dev/null
+++ b/drivers/usb/host/fsl-mph-dr-of.c
@@ -0,0 +1,219 @@
+/*
+ * Setup platform devices needed by the Freescale multi-port host
+ * and/or dual-role USB controller modules based on the description
+ * in flat device tree.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/fsl_devices.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/of_platform.h>
+
+struct fsl_usb2_dev_data {
+ char *dr_mode; /* controller mode */
+ char *drivers[3]; /* drivers to instantiate for this mode */
+ enum fsl_usb2_operating_modes op_mode; /* operating mode */
+};
+
+struct fsl_usb2_dev_data dr_mode_data[] __devinitdata = {
+ {
+ .dr_mode = "host",
+ .drivers = { "fsl-ehci", NULL, NULL, },
+ .op_mode = FSL_USB2_DR_HOST,
+ },
+ {
+ .dr_mode = "otg",
+ .drivers = { "fsl-usb2-otg", "fsl-ehci", "fsl-usb2-udc", },
+ .op_mode = FSL_USB2_DR_OTG,
+ },
+ {
+ .dr_mode = "peripheral",
+ .drivers = { "fsl-usb2-udc", NULL, NULL, },
+ .op_mode = FSL_USB2_DR_DEVICE,
+ },
+};
+
+struct fsl_usb2_dev_data * __devinit get_dr_mode_data(struct device_node *np)
+{
+ const unsigned char *prop;
+ int i;
+
+ prop = of_get_property(np, "dr_mode", NULL);
+ if (prop) {
+ for (i = 0; i < ARRAY_SIZE(dr_mode_data); i++) {
+ if (!strcmp(prop, dr_mode_data[i].dr_mode))
+ return &dr_mode_data[i];
+ }
+ }
+ pr_warn("%s: Invalid 'dr_mode' property, fallback to host mode\n",
+ np->full_name);
+ return &dr_mode_data[0]; /* mode not specified, use host */
+}
+
+static enum fsl_usb2_phy_modes __devinit determine_usb_phy(const char *phy_type)
+{
+ if (!phy_type)
+ return FSL_USB2_PHY_NONE;
+ if (!strcasecmp(phy_type, "ulpi"))
+ return FSL_USB2_PHY_ULPI;
+ if (!strcasecmp(phy_type, "utmi"))
+ return FSL_USB2_PHY_UTMI;
+ if (!strcasecmp(phy_type, "utmi_wide"))
+ return FSL_USB2_PHY_UTMI_WIDE;
+ if (!strcasecmp(phy_type, "serial"))
+ return FSL_USB2_PHY_SERIAL;
+
+ return FSL_USB2_PHY_NONE;
+}
+
+struct platform_device * __devinit fsl_usb2_device_register(
+ struct platform_device *ofdev,
+ struct fsl_usb2_platform_data *pdata,
+ const char *name, int id)
+{
+ struct platform_device *pdev;
+ const struct resource *res = ofdev->resource;
+ unsigned int num = ofdev->num_resources;
+ int retval;
+
+ pdev = platform_device_alloc(name, id);
+ if (!pdev) {
+ retval = -ENOMEM;
+ goto error;
+ }
+
+ pdev->dev.parent = &ofdev->dev;
+
+ pdev->dev.coherent_dma_mask = ofdev->dev.coherent_dma_mask;
+ pdev->dev.dma_mask = &pdev->archdata.dma_mask;
+ *pdev->dev.dma_mask = *ofdev->dev.dma_mask;
+
+ retval = platform_device_add_data(pdev, pdata, sizeof(*pdata));
+ if (retval)
+ goto error;
+
+ if (num) {
+ retval = platform_device_add_resources(pdev, res, num);
+ if (retval)
+ goto error;
+ }
+
+ retval = platform_device_add(pdev);
+ if (retval)
+ goto error;
+
+ return pdev;
+
+error:
+ platform_device_put(pdev);
+ return ERR_PTR(retval);
+}
+
+static const struct of_device_id fsl_usb2_mph_dr_of_match[];
+
+static int __devinit fsl_usb2_mph_dr_of_probe(struct platform_device *ofdev)
+{
+ struct device_node *np = ofdev->dev.of_node;
+ struct platform_device *usb_dev;
+ struct fsl_usb2_platform_data data, *pdata;
+ struct fsl_usb2_dev_data *dev_data;
+ const struct of_device_id *match;
+ const unsigned char *prop;
+ static unsigned int idx;
+ int i;
+
+ if (!of_device_is_available(np))
+ return -ENODEV;
+
+ match = of_match_device(fsl_usb2_mph_dr_of_match, &ofdev->dev);
+ if (!match)
+ return -ENODEV;
+
+ pdata = &data;
+ if (match->data)
+ memcpy(pdata, match->data, sizeof(data));
+ else
+ memset(pdata, 0, sizeof(data));
+
+ dev_data = get_dr_mode_data(np);
+
+ if (of_device_is_compatible(np, "fsl-usb2-mph")) {
+ if (of_get_property(np, "port0", NULL))
+ pdata->port_enables |= FSL_USB2_PORT0_ENABLED;
+
+ if (of_get_property(np, "port1", NULL))
+ pdata->port_enables |= FSL_USB2_PORT1_ENABLED;
+
+ pdata->operating_mode = FSL_USB2_MPH_HOST;
+ } else {
+ /* setup mode selected in the device tree */
+ pdata->operating_mode = dev_data->op_mode;
+ }
+
+ prop = of_get_property(np, "phy_type", NULL);
+ pdata->phy_mode = determine_usb_phy(prop);
+
+ for (i = 0; i < ARRAY_SIZE(dev_data->drivers); i++) {
+ if (!dev_data->drivers[i])
+ continue;
+ usb_dev = fsl_usb2_device_register(ofdev, pdata,
+ dev_data->drivers[i], idx);
+ if (IS_ERR(usb_dev)) {
+ dev_err(&ofdev->dev, "Can't register usb device\n");
+ return PTR_ERR(usb_dev);
+ }
+ }
+ idx++;
+ return 0;
+}
+
+static int __devexit __unregister_subdev(struct device *dev, void *d)
+{
+ platform_device_unregister(to_platform_device(dev));
+ return 0;
+}
+
+static int __devexit fsl_usb2_mph_dr_of_remove(struct platform_device *ofdev)
+{
+ device_for_each_child(&ofdev->dev, NULL, __unregister_subdev);
+ return 0;
+}
+
+static const struct of_device_id fsl_usb2_mph_dr_of_match[] = {
+ { .compatible = "fsl-usb2-mph", },
+ { .compatible = "fsl-usb2-dr", },
+ {},
+};
+
+static struct platform_driver fsl_usb2_mph_dr_driver = {
+ .driver = {
+ .name = "fsl-usb2-mph-dr",
+ .owner = THIS_MODULE,
+ .of_match_table = fsl_usb2_mph_dr_of_match,
+ },
+ .probe = fsl_usb2_mph_dr_of_probe,
+ .remove = __devexit_p(fsl_usb2_mph_dr_of_remove),
+};
+
+static int __init fsl_usb2_mph_dr_init(void)
+{
+ return platform_driver_register(&fsl_usb2_mph_dr_driver);
+}
+module_init(fsl_usb2_mph_dr_init);
+
+static void __exit fsl_usb2_mph_dr_exit(void)
+{
+ platform_driver_unregister(&fsl_usb2_mph_dr_driver);
+}
+module_exit(fsl_usb2_mph_dr_exit);
+
+MODULE_DESCRIPTION("FSL MPH DR OF devices driver");
+MODULE_AUTHOR("Anatolij Gustschin <agust@denx.de>");
+MODULE_LICENSE("GPL");
--
1.7.0.4
next prev parent reply other threads:[~2010-09-28 18:56 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-09-28 9:36 [PATCH v2 0/3] Add USB Host support for MPC5121 SoC Anatolij Gustschin
2010-09-28 9:36 ` [PATCH v2 1/3] powerpc/fsl_soc.c: remove FSL USB platform code Anatolij Gustschin
2010-09-28 11:40 ` Anton Vorontsov
2010-09-28 9:36 ` [PATCH v2 2/3] USB: add of_platform glue driver for FSL USB DR controller Anatolij Gustschin
2010-09-28 10:01 ` Grant Likely
2010-09-28 11:35 ` Anatolij Gustschin
2010-09-28 9:36 ` [PATCH v2 3/3] USB: add USB EHCI support for MPC5121 SoC Anatolij Gustschin
2010-09-28 18:55 ` [PATCH v3 0/2] Add USB Host " Anatolij Gustschin
2010-09-28 18:55 ` Anatolij Gustschin [this message]
2010-09-28 18:55 ` [PATCH v3 2/2] USB: add USB EHCI " Anatolij Gustschin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1285700121-9991-2-git-send-email-agust@denx.de \
--to=agust@denx.de \
--cc=dbrownell@users.sourceforge.net \
--cc=dzu@denx.de \
--cc=gregkh@suse.de \
--cc=linux-usb@vger.kernel.org \
--cc=linuxppc-dev@ozlabs.org \
--cc=wd@denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).