[PATCH 1/2] [v2] powerpc/85xx: add ngPIXIS FPGA device tree node to the P1022DS board

[PATCH 1/2] [v2] powerpc/85xx: add ngPIXIS FPGA device tree node to the P1022DS board

[Timur Tabi]

The device tree for Freescale's P1022DS reference board is missing the node
for the ngPIXIS FPGA.

Signed-off-by: Timur Tabi <timur@freescale.com>
---
 arch/powerpc/boot/dts/p1022ds.dts |   11 +++++++++++
 1 files changed, 11 insertions(+), 0 deletions(-)

diff --git a/arch/powerpc/boot/dts/p1022ds.dts b/arch/powerpc/boot/dts/p1022ds.dts
index 8bcb10b..2bbecbb 100644
--- a/arch/powerpc/boot/dts/p1022ds.dts
+++ b/arch/powerpc/boot/dts/p1022ds.dts
@@ -148,6 +148,17 @@
 				label = "reserved-nand";
 			};
 		};
+
+		board-control@3,0 {
+			compatible = "fsl,p1022ds-pixis";
+			reg = <3 0 0x30>;
+			interrupt-parent = <&mpic>;
+			/*
+			 * IRQ8 is generated if the "EVENT" switch is pressed
+			 * and PX_CTL[EVESEL] is set to 00.
+			 */
+			interrupts = <8 8>;
+		};
 	};
 
 	soc@fffe00000 {
-- 
1.7.2.3

[PATCH 2/2] [v2] powerpc/85xx: add DIU support to the Freecale P1022DS reference board

[Timur Tabi]

The Freescale P1022DS has an on-chip video controller called the DIU, and a
driver for this device already exists.  Update the platform file for the
P1022DS reference board to enable the driver, and update the defconfig for
Freescale MPC85xx boards to add the driver.

Signed-off-by: Timur Tabi <timur@freescale.com>
---
 arch/powerpc/configs/mpc85xx_defconfig     |    3 +
 arch/powerpc/configs/mpc85xx_smp_defconfig |    3 +
 arch/powerpc/platforms/85xx/p1022_ds.c     |  213 +++++++++++++++++++++++++++-
 3 files changed, 217 insertions(+), 2 deletions(-)

diff --git a/arch/powerpc/configs/mpc85xx_defconfig b/arch/powerpc/configs/mpc85xx_defconfig
index c3b113b..3aeb594 100644
--- a/arch/powerpc/configs/mpc85xx_defconfig
+++ b/arch/powerpc/configs/mpc85xx_defconfig
@@ -124,6 +124,9 @@ CONFIG_I2C_CPM=m
 CONFIG_I2C_MPC=y
 # CONFIG_HWMON is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=y
+CONFIG_FB=y
+CONFIG_FB_FSL_DIU=y
+# CONFIG_VGA_CONSOLE is not set
 CONFIG_SOUND=y
 CONFIG_SND=y
 # CONFIG_SND_SUPPORT_OLD_API is not set
diff --git a/arch/powerpc/configs/mpc85xx_smp_defconfig b/arch/powerpc/configs/mpc85xx_smp_defconfig
index a075da2..d62c801 100644
--- a/arch/powerpc/configs/mpc85xx_smp_defconfig
+++ b/arch/powerpc/configs/mpc85xx_smp_defconfig
@@ -126,6 +126,9 @@ CONFIG_I2C_CPM=m
 CONFIG_I2C_MPC=y
 # CONFIG_HWMON is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=y
+CONFIG_FB=y
+CONFIG_FB_FSL_DIU=y
+# CONFIG_VGA_CONSOLE is not set
 CONFIG_SOUND=y
 CONFIG_SND=y
 # CONFIG_SND_SUPPORT_OLD_API is not set
diff --git a/arch/powerpc/platforms/85xx/p1022_ds.c b/arch/powerpc/platforms/85xx/p1022_ds.c
index 2b390d1..bee247d 100644
--- a/arch/powerpc/platforms/85xx/p1022_ds.c
+++ b/arch/powerpc/platforms/85xx/p1022_ds.c
@@ -8,7 +8,6 @@
  * Copyright 2010 Freescale Semiconductor, Inc.
  *
  * This file is taken from the Freescale P1022DS BSP, with modifications:
- * 1) No DIU support (pending rewrite of DIU code)
  * 2) No AMP support
  * 3) No PCI endpoint support
  *
@@ -17,15 +16,216 @@
  * kind, whether express or implied.
  */
 
+#define DEBUG
+
 #include <linux/pci.h>
 #include <linux/of_platform.h>
 #include <linux/memblock.h>
-
+#include <asm/div64.h>
 #include <asm/mpic.h>
 #include <asm/swiotlb.h>
 
 #include <sysdev/fsl_soc.h>
 #include <sysdev/fsl_pci.h>
+#include <asm/fsl_guts.h>
+
+#if defined(CONFIG_FB_FSL_DIU) || defined(CONFIG_FB_FSL_DIU_MODULE)
+
+/*
+ * Board-specific initialization of the DIU.  This code should probably be
+ * executed when the DIU is opened, rather than in arch code, but the DIU
+ * driver does not have a mechanism for this (yet).
+ *
+ * This is especially problematic on the P1022DS because the local bus (eLBC)
+ * and the DIU video signals share the same pins, which means that enabling the
+ * DIU will disable access to NOR flash.
+ */
+
+/* DIU Pixel Clock bits of the CLKDVDR Global Utilities register */
+#define CLKDVDR_PXCKEN		0x80000000
+#define CLKDVDR_PXCKINV		0x10000000
+#define CLKDVDR_PXCKDLY		0x06000000
+#define CLKDVDR_PXCLK_MASK	0x00FF0000
+
+/* Some ngPIXIS register definitions */
+#define PX_BRDCFG1_DVIEN	0x80
+#define PX_BRDCFG1_DFPEN	0x40
+#define PX_BRDCFG1_BACKLIGHT	0x20
+#define PX_BRDCFG1_DDCEN	0x10
+
+/*
+ * DIU Area Descriptor
+ *
+ * Note that we need to byte-swap the value before it's written to the AD
+ * register.  So even though the registers don't look like they're in the same
+ * bit positions as they are on the MPC8610, the same value is written to the
+ * AD register on the MPC8610 and on the P1022.
+ */
+#define AD_BYTE_F		0x10000000
+#define AD_ALPHA_C_MASK		0x0E000000
+#define AD_ALPHA_C_SHIFT	25
+#define AD_BLUE_C_MASK		0x01800000
+#define AD_BLUE_C_SHIFT		23
+#define AD_GREEN_C_MASK		0x00600000
+#define AD_GREEN_C_SHIFT	21
+#define AD_RED_C_MASK		0x00180000
+#define AD_RED_C_SHIFT		19
+#define AD_PALETTE		0x00040000
+#define AD_PIXEL_S_MASK		0x00030000
+#define AD_PIXEL_S_SHIFT	16
+#define AD_COMP_3_MASK		0x0000F000
+#define AD_COMP_3_SHIFT		12
+#define AD_COMP_2_MASK		0x00000F00
+#define AD_COMP_2_SHIFT		8
+#define AD_COMP_1_MASK		0x000000F0
+#define AD_COMP_1_SHIFT		4
+#define AD_COMP_0_MASK		0x0000000F
+#define AD_COMP_0_SHIFT		0
+
+#define MAKE_AD(alpha, red, blue, green, size, c0, c1, c2, c3) \
+	cpu_to_le32(AD_BYTE_F | (alpha << AD_ALPHA_C_SHIFT) | \
+	(blue << AD_BLUE_C_SHIFT) | (green << AD_GREEN_C_SHIFT) | \
+	(red << AD_RED_C_SHIFT) | (c3 << AD_COMP_3_SHIFT) | \
+	(c2 << AD_COMP_2_SHIFT) | (c1 << AD_COMP_1_SHIFT) | \
+	(c0 << AD_COMP_0_SHIFT) | (size << AD_PIXEL_S_SHIFT))
+
+/**
+ * p1022ds_get_pixel_format: return the Area Descriptor for a given pixel depth
+ *
+ * The Area Descriptor is a 32-bit value that determine which bits in each
+ * pixel are to be used for each color.
+ */
+static unsigned int p1022ds_get_pixel_format(unsigned int bits_per_pixel,
+	int monitor_port)
+{
+	switch (bits_per_pixel) {
+	case 32:
+		/* 0x88883316 */
+		return MAKE_AD(3, 2, 0, 1, 3, 8, 8, 8, 8);
+	case 24:
+		/* 0x88082219 */
+		return MAKE_AD(4, 0, 1, 2, 2, 0, 8, 8, 8);
+	case 16:
+		/* 0x65053118 */
+		return MAKE_AD(4, 2, 1, 0, 1, 5, 6, 5, 0);
+	default:
+		pr_err("fsl-diu: unsupported pixel depth %u\n", bits_per_pixel);
+		return 0;
+	}
+}
+
+/**
+ * p1022ds_set_gamma_table: update the gamma table, if necessary
+ *
+ * On some boards, the gamma table for some ports may need to be modified.
+ * This is not the case on the P1022DS, so we do nothing.
+*/
+static void p1022ds_set_gamma_table(int monitor_port, char *gamma_table_base)
+{
+}
+
+/**
+ * p1022ds_set_monitor_port: switch the output to a different monitor port
+ *
+ */
+static void p1022ds_set_monitor_port(int monitor_port)
+{
+	struct device_node *pixis_node;
+	u8 __iomem *brdcfg1;
+
+	pixis_node = of_find_compatible_node(NULL, NULL, "fsl,p1022ds-pixis");
+	if (!pixis_node) {
+		pr_err("p1022ds: missing ngPIXIS node\n");
+		return;
+	}
+
+	brdcfg1 = of_iomap(pixis_node, 0);
+	if (!brdcfg1) {
+		pr_err("p1022ds: could not map ngPIXIS registers\n");
+		return;
+	}
+	brdcfg1 += 9;	/* BRDCFG1 is at offset 9 in the ngPIXIS */
+
+	switch (monitor_port) {
+	case 0: /* DVI */
+		/* Enable the DVI port, disable the DFP and the backlight */
+		clrsetbits_8(brdcfg1, PX_BRDCFG1_DFPEN | PX_BRDCFG1_BACKLIGHT,
+			     PX_BRDCFG1_DVIEN);
+		break;
+	case 1: /* Single link LVDS */
+		/* Enable the DFP port, disable the DVI and the backlight */
+		clrsetbits_8(brdcfg1, PX_BRDCFG1_DVIEN | PX_BRDCFG1_BACKLIGHT,
+			     PX_BRDCFG1_DFPEN);
+		break;
+	default:
+		pr_err("p1022ds: unsupported monitor port %i\n", monitor_port);
+	}
+}
+
+/**
+ * p1022ds_set_pixel_clock: program the DIU's clock
+ *
+ * @pixclock: the wavelength, in picoseconds, of the clock
+ */
+void p1022ds_set_pixel_clock(unsigned int pixclock)
+{
+	struct device_node *guts_np = NULL;
+	struct ccsr_guts_85xx __iomem *guts;
+	unsigned long freq;
+	u64 temp;
+	u32 pxclk;
+
+	/* Map the global utilities registers. */
+	guts_np = of_find_compatible_node(NULL, NULL, "fsl,p1022-guts");
+	if (!guts_np) {
+		pr_err("p1022ds: missing global utilties device node\n");
+		return;
+	}
+
+	guts = of_iomap(guts_np, 0);
+	of_node_put(guts_np);
+	if (!guts) {
+		pr_err("p1022ds: could not map global utilties device\n");
+		return;
+	}
+
+	/* Convert pixclock from a wavelength to a frequency */
+	temp = 1000000000000ULL;
+	do_div(temp, pixclock);
+	freq = temp;
+
+	/* pixclk is the ratio of the platform clock to the pixel clock */
+	pxclk = DIV_ROUND_CLOSEST(fsl_get_sys_freq(), freq);
+
+	/* Disable the pixel clock, and set it to non-inverted and no delay */
+	clrbits32(&guts->clkdvdr,
+		  CLKDVDR_PXCKEN | CLKDVDR_PXCKDLY | CLKDVDR_PXCLK_MASK);
+
+	/* Enable the clock and set the pxclk */
+	setbits32(&guts->clkdvdr, CLKDVDR_PXCKEN | (pxclk << 16));
+}
+
+/**
+ * p1022ds_show_monitor_port: show the current monitor
+ *
+ * This function returns a string indicating whether the current monitor is
+ * set to DVI or LVDS.
+ */
+ssize_t p1022ds_show_monitor_port(int monitor_port, char *buf)
+{
+	return sprintf(buf, "%c0 - DVI\n%c1 - Single link LVDS\n",
+		monitor_port == 0 ? '*' : ' ', monitor_port == 1 ? '*' : ' ');
+}
+
+/**
+ * p1022ds_set_sysfs_monitor_port: set the monitor port for sysfs
+ */
+int p1022ds_set_sysfs_monitor_port(int val)
+{
+	return val < 2 ? val : 0;
+}
+
+#endif
 
 void __init p1022_ds_pic_init(void)
 {
@@ -92,6 +292,15 @@ static void __init p1022_ds_setup_arch(void)
 	}
 #endif
 
+#if defined(CONFIG_FB_FSL_DIU) || defined(CONFIG_FB_FSL_DIU_MODULE)
+	diu_ops.get_pixel_format	= p1022ds_get_pixel_format;
+	diu_ops.set_gamma_table		= p1022ds_set_gamma_table;
+	diu_ops.set_monitor_port	= p1022ds_set_monitor_port;
+	diu_ops.set_pixel_clock		= p1022ds_set_pixel_clock;
+	diu_ops.show_monitor_port	= p1022ds_show_monitor_port;
+	diu_ops.set_sysfs_monitor_port	= p1022ds_set_sysfs_monitor_port;
+#endif
+
 #ifdef CONFIG_SMP
 	mpc85xx_smp_init();
 #endif
-- 
1.7.2.3

Re: [PATCH 2/2] [v2] powerpc/85xx: add DIU support to the Freecale P1022DS reference board

[Kumar Gala]

On Oct 7, 2010, at 2:36 PM, Timur Tabi wrote:

> The Freescale P1022DS has an on-chip video controller called the DIU, =
and a
> driver for this device already exists.  Update the platform file for =
the
> P1022DS reference board to enable the driver, and update the defconfig =
for
> Freescale MPC85xx boards to add the driver.
>=20
> Signed-off-by: Timur Tabi <timur@freescale.com>
> ---
> arch/powerpc/configs/mpc85xx_defconfig     |    3 +
> arch/powerpc/configs/mpc85xx_smp_defconfig |    3 +
> arch/powerpc/platforms/85xx/p1022_ds.c     |  213 =
+++++++++++++++++++++++++++-
> 3 files changed, 217 insertions(+), 2 deletions(-)

applied to next

- k=

Re: [PATCH 2/2] [v2] powerpc/85xx: add DIU support to the Freecale P1022DS reference board

[Kumar Gala]

On Oct 7, 2010, at 2:36 PM, Timur Tabi wrote:

> The Freescale P1022DS has an on-chip video controller called the DIU, =
and a
> driver for this device already exists.  Update the platform file for =
the
> P1022DS reference board to enable the driver, and update the defconfig =
for
> Freescale MPC85xx boards to add the driver.
>=20
> Signed-off-by: Timur Tabi <timur@freescale.com>
> ---
> arch/powerpc/configs/mpc85xx_defconfig     |    3 +
> arch/powerpc/configs/mpc85xx_smp_defconfig |    3 +
> arch/powerpc/platforms/85xx/p1022_ds.c     |  213 =
+++++++++++++++++++++++++++-
> 3 files changed, 217 insertions(+), 2 deletions(-)

I dropped this because of chicken/egg issue with guts.h

- k=

Re: [PATCH 2/2] [v2] powerpc/85xx: add DIU support to the Freecale P1022DS reference board

[Tabi Timur-B04825]
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Re: [PATCH 2/2] [v2] powerpc/85xx: add DIU support to the Freecale P1022DS reference board

[Kumar Gala]

On Oct 13, 2010, at 8:39 PM, Tabi Timur-B04825 wrote:

> Kumar Gala wrote:
>>>> arch/powerpc/configs/mpc85xx_defconfig     |    3 +
>>>> arch/powerpc/configs/mpc85xx_smp_defconfig |    3 +
>>>> arch/powerpc/platforms/85xx/p1022_ds.c     |  213 =
+++++++++++++++++++++++++++-
>>>> 3 files changed, 217 insertions(+), 2 deletions(-)
>> I dropped this because of chicken/egg issue with guts.h
>=20
> If you pull from alsa-next, it should resolve that.
>=20
> Either that, or ask the alsa guys to apply this patch instead.

Can you ask the alsa guys to pick it up.  I'm happy to ack.

- k=

Re: [PATCH 2/2] [v2] powerpc/85xx: add DIU support to the Freecale P1022DS reference board

[Timur Tabi]

Mark, can you pick up this patch for us?  Because it depends on
"powerpc: rename immap_86xx.h to fsl_guts.h, and add 85xx support", it
will break the build if we apply to powerpc-next.

You can grab the patch from http://patchwork.ozlabs.org/patch/67095/

On Thu, Oct 7, 2010 at 2:36 PM, Timur Tabi <timur@freescale.com> wrote:
> The Freescale P1022DS has an on-chip video controller called the DIU, and=
 a
> driver for this device already exists. =A0Update the platform file for th=
e
> P1022DS reference board to enable the driver, and update the defconfig fo=
r
> Freescale MPC85xx boards to add the driver.
>
> Signed-off-by: Timur Tabi <timur@freescale.com>
> ---

--=20
Timur Tabi
Linux kernel developer at Freescale

Re: [PATCH 2/2] [v2] powerpc/85xx: add DIU support to the Freecale P1022DS reference board

[Mark Brown]

On Thu, Oct 14, 2010 at 01:21:33PM -0500, Timur Tabi wrote:
> Mark, can you pick up this patch for us?  Because it depends on
> "powerpc: rename immap_86xx.h to fsl_guts.h, and add 85xx support", it
> will break the build if we apply to powerpc-next.
> 
> You can grab the patch from http://patchwork.ozlabs.org/patch/67095/

Done, but I had to fix up what looked like an add/add conflict with
headers in the file.  Since I was editing that area of the file anyway I
also dropped the #define DEBUG as it looked like a mistake.  Please send
followup patch(es) correcting things if I messed up any of that.

Re: [PATCH 1/2] [v2] powerpc/85xx: add ngPIXIS FPGA device tree node to the P1022DS board

[Kumar Gala]

On Oct 7, 2010, at 2:36 PM, Timur Tabi wrote:

> The device tree for Freescale's P1022DS reference board is missing the node
> for the ngPIXIS FPGA.
> 
> Signed-off-by: Timur Tabi <timur@freescale.com>
> ---
> arch/powerpc/boot/dts/p1022ds.dts |   11 +++++++++++
> 1 files changed, 11 insertions(+), 0 deletions(-)

applied

- k