From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from kuber.nabble.com (kuber.nabble.com [216.139.236.158]) (using TLSv1 with cipher AES256-SHA (256/256 bits)) (Client did not present a certificate) by ozlabs.org (Postfix) with ESMTP id CBD8CDDE04 for ; Tue, 25 Sep 2007 18:25:30 +1000 (EST) Received: from isper.nabble.com ([192.168.236.156]) by kuber.nabble.com with esmtp (Exim 4.63) (envelope-from ) id 1Ia5jT-00037o-Fw for linuxppc-embedded@ozlabs.org; Tue, 25 Sep 2007 01:25:27 -0700 Message-ID: <12875133.post@talk.nabble.com> Date: Tue, 25 Sep 2007 01:25:27 -0700 (PDT) From: Mirek23 To: linuxppc-embedded@ozlabs.org Subject: Re: Linux doesn not boot from u-boot on ML403 In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii References: List-Id: Linux on Embedded PowerPC Developers Mail List List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Hi Grant, Thank you very much for your response. actually I was wrong when saying: > My observation is that the linux 2.6.23 rc-2 is not that stable as 2.6.21. > In most cases It boots successfully (ie. zImage.elf) but occasionally it > fails during booting. It has never occurred with 2.6.21 which I also > copied from your side. Both version of linux 2.6.21 and 2.6.23 run very well and always boot properly. To deal with u-boot and linux kernel I use jtag and load the software straight to RAM. I have difficulties to boot uImage (kernel v2.6.23) from u-boot 1.2.0. uImage boots sometimes from u-boot but zImage.elf boots always (when loaded to RAM via jtag). It seems to be that I have the general problem with u-boot which I have described on u-boot users forum: http://www.nabble.com/u-boot-init-problem-on-ml403-%28virtex-4%29-board-tf4514050.html Best Regards Mirek -- View this message in context: http://www.nabble.com/Re%3A-Linux-doesn-not-boot-from-u-boot-on-ML403-tf4504418.html#a12875133 Sent from the linuxppc-embedded mailing list archive at Nabble.com.