From: Nethra <nethra_gmit@yahoo.co.in>
To: linuxppc-embedded@ozlabs.org
Subject: Re: jffs2 file system on MPC8272ADS
Date: Wed, 26 Sep 2007 21:52:49 -0700 (PDT) [thread overview]
Message-ID: <12914822.post@talk.nabble.com> (raw)
In-Reply-To: <20070925152301.GC15739@ld0162-tx32.am.freescale.net>
> Header CRC failed on REF_PRISTINE node at 0x0063b24c: Read 0xffffffff,
> calculated 0x44660075
> Node totlen on flash (0xffffffff) != totlen from node ref (0x000002b4)
> Header CRC failed on REF_PRISTINE node at 0x0063b500: Read 0xffffffff,
> calculated 0x44660075
> Node totlen on flash (0xffffffff) != totlen from node ref (0x000002c8)
> Header CRC failed on REF_PRISTINE node at 0x0063b7c8: Read 0xffffffff,
> calculated 0x44660075
>
> are they debug messages or warnings...?
>>They are errors.
which are all the most possible reasons for these errors ?
> # CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
> # CONFIG_MTD_MAP_BANK_WIDTH_2 is not set
> CONFIG_MTD_MAP_BANK_WIDTH_4=y
> # CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
> # CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
> # CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
> # CONFIG_MTD_CFI_I1 is not set
> CONFIG_MTD_CFI_I2=y
> # CONFIG_MTD_CFI_I4 is not set
> # CONFIG_MTD_CFI_I8 is not set
[snip]
> #
> # Mapping drivers for chip access
> #
> # CONFIG_MTD_COMPLEX_MAPPINGS is not set
> CONFIG_MTD_PHYSMAP=y
> CONFIG_MTD_PHYSMAP_START=0xFC000000
> CONFIG_MTD_PHYSMAP_LEN=0x4000000CONFIG_MTD_PHYSMAP_BANKWIDTH=4
> # CONFIG_MTD_MULTI_PHYSMAP is not set
> # CONFIG_MTD_SBC8240 is not set
> CONFIG_MTD_PQ2FADS=y
> # CONFIG_MTD_PLATRAM is not set
>>Are you using a non-standard flash SIMM? The one that comes with the
>>board (that I've seen, at least) have interleave 4, and are mapped at
>>0xfe000000.
First of all this is CUSTOM board similar to MPC8272ADS.
We are using flash which is different from flash that comes with the
MPC8272ADS board.
FLASH: S29GL256N90TF
Total size is 64 MB with 2 flash interleave
mapped at 0xfc000000.
>>Was it the physmap driver or the pq2fads driver that found the flash?
Flash is cfi compatible.
>>Which kernel are you using, and are you using arch/ppc or arch/powerpc?
>> -Scott
KERNEL: linux-2.6.10 and we r using arc/ppc
Nethra
_______________________________________________
Linuxppc-embedded mailing list
Linuxppc-embedded@ozlabs.org
https://ozlabs.org/mailman/listinfo/linuxppc-embedded
--
View this message in context: http://www.nabble.com/jffs2-file-system-on-MPC8272ADS-tf4513571.html#a12914822
Sent from the linuxppc-embedded mailing list archive at Nabble.com.
next prev parent reply other threads:[~2007-09-27 4:52 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-09-25 6:01 jffs2 file system on MPC8272ADS Nethra
2007-09-25 15:23 ` Scott Wood
2007-09-27 4:52 ` Nethra [this message]
2007-09-27 16:19 ` Scott Wood
2007-10-03 4:45 ` Nethra
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=12914822.post@talk.nabble.com \
--to=nethra_gmit@yahoo.co.in \
--cc=linuxppc-embedded@ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).