From: Benjamin Herrenschmidt <benh@kernel.crashing.org>
To: Nishanth Aravamudan <nacc@us.ibm.com>
Cc: linuxppc-dev@ozlabs.org, sonnyrao@us.ibm.com,
Anton Blanchard <anton@samba.org>,
miltonm@bga.com
Subject: Re: 2.6.37-git17 virtual IO boot failure
Date: Wed, 19 Jan 2011 15:54:38 +1100 [thread overview]
Message-ID: <1295412878.2148.127.camel@pasglop> (raw)
In-Reply-To: <20110119043757.GA29865@us.ibm.com>
On Tue, 2011-01-18 at 20:37 -0800, Nishanth Aravamudan wrote:
> Is this what you were looking for?
>
> vio 30000000: Warning: IOMMU dma not supported: mask 0xffffffffffffffff, table unavailable
> vio 30000000: Path: /vdevice/vty@30000000
> vio 4000: Warning: IOMMU dma not supported: mask 0xffffffffffffffff, table unavailable
> vio 4000: Path: /vdevice/IBM,sp@4000
> vio 4001: Warning: IOMMU dma not supported: mask 0xffffffffffffffff, table unavailable
> vio 4001: Path: /vdevice/rtc@4001
> vio 4002: Warning: IOMMU dma not supported: mask 0xffffffffffffffff, table unavailable
> vio 4002: Path: /vdevice/nvram@4002
> vio 4004: Warning: IOMMU dma not supported: mask 0xffffffffffffffff, table unavailable
> vio 4004: Path: /vdevice/gscsi@4004
Ok, so they are all harmess (none of those device do DMA, appart maybe
gscsi, I have no idea what it is :-)
> FWIW, I looked at Anton's logs, and I don't think the boot failed, per
> se. I think it may have timed out (but not positive on that). I was able
> to boot 2.6.27-git17 on the exact same box, albeit it locks up at a
> later point (the sd abort I e-mailed about in a follow-up).
I haven't seen your email. I'll dig. Have to run now.
Cheers,
Ben.
>
>
> >
> > Cheers,
> > Ben.
> >
> > > After debugging a bit, this would appear to be due to the second hunk of
> > > b3c73856ae47d43d0d181f9de1c1c6c0820c4515.
> > >
> > > diff --git a/arch/powerpc/kernel/vio.c b/arch/powerpc/kernel/vio.c
> > > index b265405..1b695fd 100644
> > > --- a/arch/powerpc/kernel/vio.c
> > > +++ b/arch/powerpc/kernel/vio.c
> > > @@ -1257,6 +1257,10 @@ struct vio_dev *vio_register_device_node(struct device_node *of_node)
> > > viodev->dev.parent = &vio_bus_device.dev;
> > > viodev->dev.bus = &vio_bus_type;
> > > viodev->dev.release = vio_dev_release;
> > > + /* needed to ensure proper operation of coherent allocations
> > > + * later, in case driver doesn't set it explicitly */
> > > + dma_set_mask(&viodev->dev, DMA_BIT_MASK(64));
> > > + dma_set_coherent_mask(&viodev->dev, DMA_BIT_MASK(64));
> > >
> > > /* register with generic device framework */
> > > if (device_register(&viodev->dev)) {
> > >
> > > Milton, Sonny, any thoughts?
> > >
> > > Thanks,
> > > Nish
> > >
> >
> >
>
next prev parent reply other threads:[~2011-01-19 4:54 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-01-18 1:31 2.6.37-git17 virtual IO boot failure Anton Blanchard
2011-01-18 22:47 ` Nishanth Aravamudan
2011-01-19 0:48 ` Nishanth Aravamudan
2011-01-19 6:06 ` Benjamin Herrenschmidt
2011-01-19 22:26 ` Nishanth Aravamudan
2011-01-19 4:06 ` Benjamin Herrenschmidt
2011-01-19 4:37 ` Nishanth Aravamudan
2011-01-19 4:54 ` Benjamin Herrenschmidt [this message]
2011-01-29 22:22 ` Anton Blanchard
2011-01-29 22:24 ` [PATCH 1/5] powerpc/numa: Only use active VPHN count fields Anton Blanchard
2011-01-29 22:26 ` [PATCH 2/5] powerpc/numa: Check for all VPHN changes Anton Blanchard
2011-01-29 22:28 ` [PATCH 3/5] powerpc/numa: Add length when creating OF properties via VPHN Anton Blanchard
2011-01-29 22:35 ` [PATCH 4/5] powerpc/numa: Disable VPHN on dedicated processor partitions Anton Blanchard
2011-01-29 22:37 ` [PATCH 5/5] powerpc/numa: Fix bug in unmap_cpu_from_node Anton Blanchard
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1295412878.2148.127.camel@pasglop \
--to=benh@kernel.crashing.org \
--cc=anton@samba.org \
--cc=linuxppc-dev@ozlabs.org \
--cc=miltonm@bga.com \
--cc=nacc@us.ibm.com \
--cc=sonnyrao@us.ibm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).