linuxppc-dev.lists.ozlabs.org archive mirror
 help / color / mirror / Atom feed
From: Dave Kleikamp <shaggy@linux.vnet.ibm.com>
To: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: linuxppc-dev@lists.ozlabs.org, Dave Kleikamp <shaggy@linux.vnet.ibm.com>
Subject: [PATCH 4/5] powerpc/44x: don't use tlbivax on AMP systems
Date: Wed, 26 Jan 2011 15:51:15 -0600	[thread overview]
Message-ID: <1296078676-13940-5-git-send-email-shaggy@linux.vnet.ibm.com> (raw)
In-Reply-To: <1296078676-13940-1-git-send-email-shaggy@linux.vnet.ibm.com>

Since other OS's may be running on the other cores don't use tlbivax

Signed-off-by: Dave Kleikamp <shaggy@linux.vnet.ibm.com>
---
 arch/powerpc/include/asm/mmu.h |    2 +-
 arch/powerpc/kernel/setup_32.c |    2 ++
 arch/powerpc/mm/tlb_nohash.c   |   21 ++++++++++++++++++++-
 3 files changed, 23 insertions(+), 2 deletions(-)

diff --git a/arch/powerpc/include/asm/mmu.h b/arch/powerpc/include/asm/mmu.h
index bb40a06..f3a7c65 100644
--- a/arch/powerpc/include/asm/mmu.h
+++ b/arch/powerpc/include/asm/mmu.h
@@ -80,7 +80,7 @@ static inline int mmu_has_feature(unsigned long feature)
 
 extern unsigned int __start___mmu_ftr_fixup, __stop___mmu_ftr_fixup;
 
-/* MMU initialization (64-bit only fo now) */
+/* MMU initialization */
 extern void early_init_mmu(void);
 extern void early_init_mmu_secondary(void);
 
diff --git a/arch/powerpc/kernel/setup_32.c b/arch/powerpc/kernel/setup_32.c
index d1ca976..e50ead7 100644
--- a/arch/powerpc/kernel/setup_32.c
+++ b/arch/powerpc/kernel/setup_32.c
@@ -126,6 +126,8 @@ notrace void __init machine_init(unsigned long dt_ptr)
 	/* Enable early debugging if any specified (see udbg.h) */
 	udbg_early_init();
 
+	early_init_mmu();
+
 	probe_machine();
 
 	setup_kdump_trampoline();
diff --git a/arch/powerpc/mm/tlb_nohash.c b/arch/powerpc/mm/tlb_nohash.c
index 2a030d8..b33c5e6 100644
--- a/arch/powerpc/mm/tlb_nohash.c
+++ b/arch/powerpc/mm/tlb_nohash.c
@@ -35,6 +35,7 @@
 #include <linux/preempt.h>
 #include <linux/spinlock.h>
 #include <linux/memblock.h>
+#include <linux/of_fdt.h>
 
 #include <asm/tlbflush.h>
 #include <asm/tlb.h>
@@ -153,6 +154,17 @@ EXPORT_SYMBOL(local_flush_tlb_page);
  */
 #ifdef CONFIG_SMP
 
+static int amp;
+
+#ifdef CONFIG_44x
+void __init early_init_mmu_44x(void)
+{
+	unsigned long root = of_get_flat_dt_root();
+	if (of_flat_dt_is_compatible(root, "ibm,47x-AMP"))
+		amp = 1;
+}
+#endif /* CONFIG_44x */
+
 static DEFINE_RAW_SPINLOCK(tlbivax_lock);
 
 static int mm_is_core_local(struct mm_struct *mm)
@@ -232,7 +244,7 @@ void __flush_tlb_page(struct mm_struct *mm, unsigned long vmaddr,
 	cpu_mask = mm_cpumask(mm);
 	if (!mm_is_core_local(mm)) {
 		/* If broadcast tlbivax is supported, use it */
-		if (mmu_has_feature(MMU_FTR_USE_TLBIVAX_BCAST)) {
+		if (!amp && mmu_has_feature(MMU_FTR_USE_TLBIVAX_BCAST)) {
 			int lock = mmu_has_feature(MMU_FTR_LOCK_BCAST_INVAL);
 			if (lock)
 				raw_spin_lock(&tlbivax_lock);
@@ -587,4 +599,11 @@ void setup_initial_memory_limit(phys_addr_t first_memblock_base,
 	/* Finally limit subsequent allocations */
 	memblock_set_current_limit(first_memblock_base + ppc64_rma_size);
 }
+#else /* ! CONFIG_PPC64 */
+void __init early_init_mmu(void)
+{
+#if defined(CONFIG_SMP) && defined(CONFIG_44x)
+	early_init_mmu_44x();
+#endif
+}
 #endif /* CONFIG_PPC64 */
-- 
1.7.3.4

  parent reply	other threads:[~2011-01-26 21:51 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2011-01-26 21:51 [PATCH 0/5] powerpc: AMP support for 47x Dave Kleikamp
2011-01-26 21:51 ` [PATCH 1/5] powerpc: Move udbg_early_init() after early_init_devtree() Dave Kleikamp
2011-01-26 21:51 ` [PATCH 2/5] powerpc/44x: allow override to hard-coded uart address Dave Kleikamp
2011-01-26 21:51 ` [PATCH 3/5] powerpc/47x: allow kernel to be loaded in higher physical memory Dave Kleikamp
2011-01-26 21:51 ` Dave Kleikamp [this message]
2011-01-26 21:51 ` [PATCH 5/5] powerpc/476: Create a dts files for two 476 AMP instances under ISS Dave Kleikamp

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1296078676-13940-5-git-send-email-shaggy@linux.vnet.ibm.com \
    --to=shaggy@linux.vnet.ibm.com \
    --cc=benh@kernel.crashing.org \
    --cc=linuxppc-dev@lists.ozlabs.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).