From: Meador Inge <meador_inge@mentor.com>
To: linuxppc-dev@lists.ozlabs.org
Cc: devicetree-discuss@lists.ozlabs.org,
Hollis Blanchard <hollis_blanchard@mentor.com>
Subject: [PATCH v5 2/3] powerpc: make MPIC honor the "pic-no-reset" device tree property
Date: Mon, 14 Mar 2011 15:01:06 -0500 [thread overview]
Message-ID: <1300132867-4840-3-git-send-email-meador_inge@mentor.com> (raw)
In-Reply-To: <1300132867-4840-1-git-send-email-meador_inge@mentor.com>
This property, defined in the Open PIC binding, tells the kernel not to use
the reset bit in the global configuration register. Additionally, its
presence mandates that only sources which are actually used (i.e. appear in
the device tree) should have their VECPRI bits initialized.
Although, "pic-no-reset" can be used for the same use cases that
"protected-sources" is covering, the "protected-sources" implementation was
left completely intact. This is a more pragmatic approach as there are
already several existing systems which use protected sources. If
"pic-no-reset" *and* "protected-sources" are both used, however, then
"pic-no-reset" takes precedence in terms of the init behavior and the
sanity checks done by protected sources will still take place.
Signed-off-by: Meador Inge <meador_inge@mentor.com>
Cc: Hollis Blanchard <hollis_blanchard@mentor.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
arch/powerpc/include/asm/mpic.h | 4 ++
arch/powerpc/sysdev/mpic.c | 66 ++++++++++++++++++++++++++++++++------
2 files changed, 59 insertions(+), 11 deletions(-)
diff --git a/arch/powerpc/include/asm/mpic.h b/arch/powerpc/include/asm/mpic.h
index e000cce..1c19734 100644
--- a/arch/powerpc/include/asm/mpic.h
+++ b/arch/powerpc/include/asm/mpic.h
@@ -367,6 +367,10 @@ struct mpic
#define MPIC_SINGLE_DEST_CPU 0x00001000
/* Enable CoreInt delivery of interrupts */
#define MPIC_ENABLE_COREINT 0x00002000
+/* Disable resetting of the MPIC.
+ * NOTE: This flag trumps MPIC_WANTS_RESET.
+ */
+#define MPIC_NO_RESET 0x00004000
/* MPIC HW modification ID */
#define MPIC_REGSET_MASK 0xf0000000
diff --git a/arch/powerpc/sysdev/mpic.c b/arch/powerpc/sysdev/mpic.c
index b0c8469..112bff0 100644
--- a/arch/powerpc/sysdev/mpic.c
+++ b/arch/powerpc/sysdev/mpic.c
@@ -906,6 +906,20 @@ void mpic_set_vector(unsigned int virq, unsigned int vector)
mpic_irq_write(src, MPIC_INFO(IRQ_VECTOR_PRI), vecpri);
}
+void mpic_set_destination(unsigned int virq, unsigned int cpuid)
+{
+ struct mpic *mpic = mpic_from_irq(virq);
+ unsigned int src = mpic_irq_to_hw(virq);
+
+ DBG("mpic: set_destination(mpic:@%p,virq:%d,src:%d,cpuid:0x%x)\n",
+ mpic, virq, src, cpuid);
+
+ if (src >= mpic->irq_count)
+ return;
+
+ mpic_irq_write(src, MPIC_INFO(IRQ_DESTINATION), 1 << cpuid);
+}
+
static struct irq_chip mpic_irq_chip = {
.mask = mpic_mask_irq,
.unmask = mpic_unmask_irq,
@@ -986,6 +1000,21 @@ static int mpic_host_map(struct irq_host *h, unsigned int virq,
/* Set default irq type */
set_irq_type(virq, IRQ_TYPE_NONE);
+ /* If the MPIC was reset, then all vectors have already been
+ * initialized. Otherwise, a per source lazy initialization
+ * is done here.
+ */
+ if (!mpic_is_ipi(mpic, hw) && (mpic->flags & MPIC_NO_RESET)) {
+ unsigned int cpu = 0;
+
+ if (mpic->flags & MPIC_PRIMARY)
+ cpu = hard_smp_processor_id();
+
+ mpic_set_vector(virq, hw);
+ mpic_set_destination(virq, cpu);
+ mpic_irq_set_priority(virq, 8);
+ }
+
return 0;
}
@@ -1033,6 +1062,11 @@ static struct irq_host_ops mpic_host_ops = {
.xlate = mpic_host_xlate,
};
+static int mpic_reset_prohibited(struct device_node *node)
+{
+ return node && of_get_property(node, "pic-no-reset", NULL);
+}
+
/*
* Exported functions
*/
@@ -1153,7 +1187,15 @@ struct mpic * __init mpic_alloc(struct device_node *node,
mpic_map(mpic, node, paddr, &mpic->tmregs, MPIC_INFO(TIMER_BASE), 0x1000);
/* Reset */
- if (flags & MPIC_WANTS_RESET) {
+
+ /* When using a device-node, reset requests are only honored if the MPIC
+ * is allowed to reset.
+ */
+ if (mpic_reset_prohibited(node))
+ mpic->flags |= MPIC_NO_RESET;
+
+ if ((flags & MPIC_WANTS_RESET) && !(mpic->flags & MPIC_NO_RESET)) {
+ printk(KERN_DEBUG "mpic: Resetting\n");
mpic_write(mpic->gregs, MPIC_INFO(GREG_GLOBAL_CONF_0),
mpic_read(mpic->gregs, MPIC_INFO(GREG_GLOBAL_CONF_0))
| MPIC_GREG_GCONF_RESET);
@@ -1318,17 +1360,19 @@ void __init mpic_init(struct mpic *mpic)
else
cpu = 0;
- for (i = 0; i < mpic->num_sources; i++) {
- /* start with vector = source number, and masked */
- u32 vecpri = MPIC_VECPRI_MASK | i |
- (8 << MPIC_VECPRI_PRIORITY_SHIFT);
+ if (!(mpic->flags & MPIC_NO_RESET)) {
+ for (i = 0; i < mpic->num_sources; i++) {
+ /* start with vector = source number, and masked */
+ u32 vecpri = MPIC_VECPRI_MASK | i |
+ (8 << MPIC_VECPRI_PRIORITY_SHIFT);
- /* check if protected */
- if (mpic->protected && test_bit(i, mpic->protected))
- continue;
- /* init hw */
- mpic_irq_write(i, MPIC_INFO(IRQ_VECTOR_PRI), vecpri);
- mpic_irq_write(i, MPIC_INFO(IRQ_DESTINATION), 1 << cpu);
+ /* check if protected */
+ if (mpic->protected && test_bit(i, mpic->protected))
+ continue;
+ /* init hw */
+ mpic_irq_write(i, MPIC_INFO(IRQ_VECTOR_PRI), vecpri);
+ mpic_irq_write(i, MPIC_INFO(IRQ_DESTINATION), 1 << cpu);
+ }
}
/* Init spurious vector */
--
1.6.3.3
next prev parent reply other threads:[~2011-03-14 20:01 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-03-14 20:01 [PATCH v5 0/3] powerpc: Open PIC binding and "pic-no-reset" Meador Inge
2011-03-14 20:01 ` [PATCH v5 1/3] powerpc: document the Open PIC device tree binding Meador Inge
2011-03-14 20:01 ` Meador Inge [this message]
2011-03-14 20:01 ` [PATCH v5 3/3] powerpc: factoring mpic cpu id fetching into a function Meador Inge
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1300132867-4840-3-git-send-email-meador_inge@mentor.com \
--to=meador_inge@mentor.com \
--cc=devicetree-discuss@lists.ozlabs.org \
--cc=hollis_blanchard@mentor.com \
--cc=linuxppc-dev@lists.ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox