From: Andrea Galbusera <gizero@gmail.com>
To: Pantelis Antoniou <pantelis.antoniou@gmail.com>,
Vitaly Bordug <vbordug@ru.mvista.com>,
Scott Wood <scottwood@freescale.com>
Cc: netdev@vger.kernel.org, linuxppc-dev@lists.ozlabs.org,
linux-kernel@vger.kernel.org, Andrea Galbusera <gizero@gmail.com>
Subject: [PATCH v2 1/1] powerpc: Fix multicast problem in fs_enet driver
Date: Thu, 21 Apr 2011 14:21:21 +0200 [thread overview]
Message-ID: <1303388481-17993-1-git-send-email-gizero@gmail.com> (raw)
mac-fec.c was setting individual UDP address registers instead of multicast
group address registers when joining a multicast group.
This prevented from correctly receiving UDP multicast packets.
According to datasheet, replaced hash_table_high and hash_table_low
with grp_hash_table_high and grp_hash_table_low respectively.
Also renamed hash_table_* with grp_hash_table_* in struct fec declaration
for 8xx: these registers are used only for multicast there.
Tested on a MPC5121 based board.
Build tested also against mpc866_ads_defconfig.
Signed-off-by: Andrea Galbusera <gizero@gmail.com>
---
Changes since v1:
Applied comments by Scott Wood to fix 8xx broken build with v1
arch/powerpc/include/asm/8xx_immap.h | 4 ++--
drivers/net/fs_enet/mac-fec.c | 8 ++++----
2 files changed, 6 insertions(+), 6 deletions(-)
diff --git a/arch/powerpc/include/asm/8xx_immap.h b/arch/powerpc/include/asm/8xx_immap.h
index 6b6dc20..bdf0563 100644
--- a/arch/powerpc/include/asm/8xx_immap.h
+++ b/arch/powerpc/include/asm/8xx_immap.h
@@ -393,8 +393,8 @@ typedef struct fec {
uint fec_addr_low; /* lower 32 bits of station address */
ushort fec_addr_high; /* upper 16 bits of station address */
ushort res1; /* reserved */
- uint fec_hash_table_high; /* upper 32-bits of hash table */
- uint fec_hash_table_low; /* lower 32-bits of hash table */
+ uint fec_grp_hash_table_high; /* upper 32-bits of hash table */
+ uint fec_grp_hash_table_low; /* lower 32-bits of hash table */
uint fec_r_des_start; /* beginning of Rx descriptor ring */
uint fec_x_des_start; /* beginning of Tx descriptor ring */
uint fec_r_buff_size; /* Rx buffer size */
diff --git a/drivers/net/fs_enet/mac-fec.c b/drivers/net/fs_enet/mac-fec.c
index 61035fc..b9fbc83 100644
--- a/drivers/net/fs_enet/mac-fec.c
+++ b/drivers/net/fs_enet/mac-fec.c
@@ -226,8 +226,8 @@ static void set_multicast_finish(struct net_device *dev)
}
FC(fecp, r_cntrl, FEC_RCNTRL_PROM);
- FW(fecp, hash_table_high, fep->fec.hthi);
- FW(fecp, hash_table_low, fep->fec.htlo);
+ FW(fecp, grp_hash_table_high, fep->fec.hthi);
+ FW(fecp, grp_hash_table_low, fep->fec.htlo);
}
static void set_multicast_list(struct net_device *dev)
@@ -273,8 +273,8 @@ static void restart(struct net_device *dev)
/*
* Reset all multicast.
*/
- FW(fecp, hash_table_high, fep->fec.hthi);
- FW(fecp, hash_table_low, fep->fec.htlo);
+ FW(fecp, grp_hash_table_high, fep->fec.hthi);
+ FW(fecp, grp_hash_table_low, fep->fec.htlo);
/*
* Set maximum receive buffer size.
--
1.7.0.4
next reply other threads:[~2011-04-21 12:21 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-04-21 12:21 Andrea Galbusera [this message]
2011-04-21 23:59 ` [PATCH v2 1/1] powerpc: Fix multicast problem in fs_enet driver David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1303388481-17993-1-git-send-email-gizero@gmail.com \
--to=gizero@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=netdev@vger.kernel.org \
--cc=pantelis.antoniou@gmail.com \
--cc=scottwood@freescale.com \
--cc=vbordug@ru.mvista.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).