[PATCH 2/2] powerpc, mpc5200: update mpc5200_defconfig to fit for charon board.

[PATCH 2/2] powerpc, mpc5200: update mpc5200_defconfig to fit for charon board.

[Heiko Schocher]

Add:

- CONFIG_MTD_PLATRAM=y
  (selects CONFIG_MTD_RAM, so this is removed)
- CONFIG_FIXED_PHY=y
- CONFIG_SENSORS_LM80=y
- CONFIG_FB_FOREIGN_ENDIAN=y
- CONFIG_FB_SM501=m
- CONFIG_RTC_DRV_DS1374=y

also to the mpc5200_defconfig, as Grant suggested here:
http://lists.ozlabs.org/pipermail/linuxppc-dev/2011-May/089844.html

Signed-off-by: Heiko Schocher <hs@denx.de>
cc: Grant Likely <grant.likely@secretlab.ca>
cc: Wolfgang Denk <wd@denx.de>
---
based against:
git://git.secretlab.ca/git/linux-2.6

./scripts/checkpatch.pl 0002-powerpc-mpc5200-update-mpc5200_defconfig-to-fit-for-.patch
total: 0 errors, 0 warnings, 39 lines checked

0002-powerpc-mpc5200-update-mpc5200_defconfig-to-fit-for-.patch has no obvious style problems and is ready for submission.

 arch/powerpc/configs/mpc5200_defconfig |    8 +++++++-
 1 files changed, 7 insertions(+), 1 deletions(-)

diff --git a/arch/powerpc/configs/mpc5200_defconfig b/arch/powerpc/configs/mpc5200_defconfig
index e9813a7..7a0bcd7 100644
--- a/arch/powerpc/configs/mpc5200_defconfig
+++ b/arch/powerpc/configs/mpc5200_defconfig
@@ -41,9 +41,9 @@ CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
 CONFIG_MTD_CFI=y
 CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_RAM=y
 CONFIG_MTD_ROM=y
 CONFIG_MTD_PHYSMAP_OF=y
+CONFIG_MTD_PLATRAM=y
 CONFIG_MTD_UBI=m
 CONFIG_PROC_DEVICETREE=y
 CONFIG_BLK_DEV_LOOP=y
@@ -59,6 +59,7 @@ CONFIG_PATA_MPC52xx=y
 CONFIG_PATA_PLATFORM=y
 CONFIG_NETDEVICES=y
 CONFIG_LXT_PHY=y
+CONFIG_FIXED_PHY=y
 CONFIG_NET_ETHERNET=y
 CONFIG_FEC_MPC52xx=y
 # CONFIG_NETDEV_1000 is not set
@@ -77,11 +78,15 @@ CONFIG_SPI_GPIO=m
 CONFIG_SPI_MPC52xx=m
 CONFIG_SPI_MPC52xx_PSC=m
 CONFIG_SPI_SPIDEV=m
+CONFIG_SENSORS_LM80=y
 CONFIG_WATCHDOG=y
+CONFIG_MFD_SM501=m
 CONFIG_DRM=y
 CONFIG_VIDEO_OUTPUT_CONTROL=y
 CONFIG_FB=y
+CONFIG_FB_FOREIGN_ENDIAN=y
 CONFIG_FB_RADEON=y
+CONFIG_FB_SM501=m
 # CONFIG_VGA_CONSOLE is not set
 CONFIG_FRAMEBUFFER_CONSOLE=y
 CONFIG_LOGO=y
@@ -109,6 +114,7 @@ CONFIG_USB_STORAGE=y
 CONFIG_NEW_LEDS=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_DRV_DS1307=y
+CONFIG_RTC_DRV_DS1374=y
 CONFIG_EXT2_FS=y
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-- 
1.7.4.4

[PATCH 1/2] powerpc, mpc5200: update defconfig to fit with 2.6.37-rc4

[Heiko Schocher]

Signed-off-by: Heiko Schocher <hs@denx.de>
cc: Wolfram Sang <w.sang@pengutronix.de>
cc: linuxppc-dev@lists.ozlabs.org
---
- based against 2.6.37-rc4
- I did the following steps to generate this patch:

  make mpc5200_defconfig
  make savedefconfig
  cp ./defconfig arch/powerpc/configs/mpc5200_defconfig

 arch/powerpc/configs/mpc5200_defconfig |    5 +----
 1 files changed, 1 insertions(+), 4 deletions(-)

diff --git a/arch/powerpc/configs/mpc5200_defconfig b/arch/powerpc/configs/mpc5200_defconfig
index 7376e27..6f75623 100644
--- a/arch/powerpc/configs/mpc5200_defconfig
+++ b/arch/powerpc/configs/mpc5200_defconfig
@@ -1,5 +1,6 @@
 CONFIG_EXPERIMENTAL=y
 CONFIG_SYSVIPC=y
+CONFIG_SPARSE_IRQ=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_BLK_DEV_INITRD=y
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
@@ -20,7 +21,6 @@ CONFIG_PPC_BESTCOMM=y
 CONFIG_SIMPLE_GPIO=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
-CONFIG_SPARSE_IRQ=y
 CONFIG_PM=y
 CONFIG_NET=y
 CONFIG_PACKET=y
@@ -52,7 +52,6 @@ CONFIG_PROC_DEVICETREE=y
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_SIZE=32768
-CONFIG_EEPROM_AT24=y
 CONFIG_SCSI_TGT=y
 CONFIG_BLK_DEV_SD=y
 CONFIG_CHR_DEV_SG=y
@@ -114,7 +113,6 @@ CONFIG_RTC_DRV_DS1307=y
 CONFIG_EXT2_FS=y
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_INOTIFY=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
 CONFIG_PROC_KCORE=y
@@ -132,5 +130,4 @@ CONFIG_PRINTK_TIME=y
 CONFIG_DEBUG_KERNEL=y
 CONFIG_DETECT_HUNG_TASK=y
 CONFIG_DEBUG_INFO=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-- 
1.7.2.3

[PATCH 2/2] powerpc, mpc5200: update mpc5200_defconfig to fit for charon board.

[Heiko Schocher]

add to mpc5200_defconfig:

CONFIG_SENSORS_LM80=m
CONFIG_RTC_DRV_DS1374=m

as this is used by the charon board.

Signed-off-by: Heiko Schocher <hs@denx.de>
cc: Wolfram Sang <w.sang@pengutronix.de>
cc: linuxppc-dev@lists.ozlabs.org

---
- based against 2.6.37-rc4

 arch/powerpc/configs/mpc5200_defconfig |    2 ++
 1 files changed, 2 insertions(+), 0 deletions(-)

diff --git a/arch/powerpc/configs/mpc5200_defconfig b/arch/powerpc/configs/mpc5200_defconfig
index 6f75623..70e5d8e 100644
--- a/arch/powerpc/configs/mpc5200_defconfig
+++ b/arch/powerpc/configs/mpc5200_defconfig
@@ -78,6 +78,7 @@ CONFIG_SPI_GPIO=m
 CONFIG_SPI_MPC52xx=m
 CONFIG_SPI_MPC52xx_PSC=m
 CONFIG_SPI_SPIDEV=m
+CONFIG_SENSORS_LM80=m
 CONFIG_WATCHDOG=y
 CONFIG_DRM=y
 CONFIG_VIDEO_OUTPUT_CONTROL=y
@@ -110,6 +111,7 @@ CONFIG_USB_STORAGE=y
 CONFIG_NEW_LEDS=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_DRV_DS1307=y
+CONFIG_RTC_DRV_DS1374=m
 CONFIG_EXT2_FS=y
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-- 
1.7.2.3