From: Benjamin Herrenschmidt <benh@kernel.crashing.org>
To: Scott Wood <scottwood@freescale.com>
Cc: linuxppc-dev@lists.ozlabs.org
Subject: Re: [PATCH 6/7] powerpc/mm: 64-bit: tlb handler micro-optimization
Date: Thu, 19 May 2011 07:37:47 +1000 [thread overview]
Message-ID: <1305754667.7481.5.camel@pasglop> (raw)
In-Reply-To: <20110518210536.GE29524@schlenkerla.am.freescale.net>
On Wed, 2011-05-18 at 16:05 -0500, Scott Wood wrote:
> A little more speed up measured on e5500.
>
> Setting of U0-3 is dropped as it is not used by Linux as far as I can
> see.
Please keep them for now. If your core doesn't have them, make them an
MMU feature.
Cheers,
Ben.
> Signed-off-by: Scott Wood <scottwood@freescale.com>
> ---
> arch/powerpc/mm/tlb_low_64e.S | 21 ++++++++-------------
> 1 files changed, 8 insertions(+), 13 deletions(-)
>
> diff --git a/arch/powerpc/mm/tlb_low_64e.S b/arch/powerpc/mm/tlb_low_64e.S
> index e782023..a94c87b 100644
> --- a/arch/powerpc/mm/tlb_low_64e.S
> +++ b/arch/powerpc/mm/tlb_low_64e.S
> @@ -47,10 +47,10 @@
> * We could probably also optimize by not saving SRR0/1 in the
> * linear mapping case but I'll leave that for later
> */
> - mfspr r14,SPRN_ESR
> mfspr r16,SPRN_DEAR /* get faulting address */
> srdi r15,r16,60 /* get region */
> cmpldi cr0,r15,0xc /* linear mapping ? */
> + mfspr r14,SPRN_ESR
> TLB_MISS_STATS_SAVE_INFO
> beq tlb_load_linear /* yes -> go to linear map load */
>
> @@ -62,11 +62,11 @@
> andi. r10,r15,0x1
> bne- virt_page_table_tlb_miss
>
> - std r14,EX_TLB_ESR(r12); /* save ESR */
> - std r16,EX_TLB_DEAR(r12); /* save DEAR */
> + /* We need _PAGE_PRESENT and _PAGE_ACCESSED set */
>
> - /* We need _PAGE_PRESENT and _PAGE_ACCESSED set */
> + std r14,EX_TLB_ESR(r12); /* save ESR */
> li r11,_PAGE_PRESENT
> + std r16,EX_TLB_DEAR(r12); /* save DEAR */
> oris r11,r11,_PAGE_ACCESSED@h
>
> /* We do the user/kernel test for the PID here along with the RW test
> @@ -225,21 +225,16 @@ finish_normal_tlb_miss:
> * yet implemented for now
> * MAS 2 : Defaults not useful, need to be redone
> * MAS 3+7 : Needs to be done
> - *
> - * TODO: mix up code below for better scheduling
> */
> clrrdi r11,r16,12 /* Clear low crap in EA */
> + rldicr r15,r14,64-(PTE_RPN_SHIFT-PAGE_SHIFT),63-PAGE_SHIFT
> rlwimi r11,r14,32-19,27,31 /* Insert WIMGE */
> + clrldi r15,r15,12 /* Clear crap at the top */
> mtspr SPRN_MAS2,r11
> -
> - /* Move RPN in position */
> - rldicr r11,r14,64-(PTE_RPN_SHIFT-PAGE_SHIFT),63-PAGE_SHIFT
> - clrldi r15,r11,12 /* Clear crap at the top */
> - rlwimi r15,r14,32-8,22,25 /* Move in U bits */
> + andi. r11,r14,_PAGE_DIRTY
> rlwimi r15,r14,32-2,26,31 /* Move in BAP bits */
>
> /* Mask out SW and UW if !DIRTY (XXX optimize this !) */
> - andi. r11,r14,_PAGE_DIRTY
> bne 1f
> li r11,MAS3_SW|MAS3_UW
> andc r15,r15,r11
> @@ -483,10 +478,10 @@ virt_page_table_tlb_miss_whacko_fault:
> * We could probably also optimize by not saving SRR0/1 in the
> * linear mapping case but I'll leave that for later
> */
> - mfspr r14,SPRN_ESR
> mfspr r16,SPRN_DEAR /* get faulting address */
> srdi r11,r16,60 /* get region */
> cmpldi cr0,r11,0xc /* linear mapping ? */
> + mfspr r14,SPRN_ESR
> TLB_MISS_STATS_SAVE_INFO
> beq tlb_load_linear /* yes -> go to linear map load */
>
next prev parent reply other threads:[~2011-05-18 21:37 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-05-18 21:04 [PATCH 1/7] powerpc/mm: 64-bit 4k: use page-sized PMDs Scott Wood
2011-05-18 21:05 ` [PATCH 2/7] powerpc/mm: 64-bit 4k: use a PMD-based virtual page table Scott Wood
2011-05-18 21:33 ` Benjamin Herrenschmidt
2011-05-20 20:57 ` Scott Wood
2011-05-20 22:15 ` Benjamin Herrenschmidt
2011-05-23 18:54 ` Scott Wood
2011-05-23 20:51 ` Benjamin Herrenschmidt
2011-05-23 23:31 ` Scott Wood
2011-05-24 2:52 ` Benjamin Herrenschmidt
2011-05-18 21:05 ` [PATCH 3/7] powerpc/mm: 64-bit tlb miss: get PACA from memory rather than SPR Scott Wood
2011-05-18 21:05 ` [PATCH 4/7] powerpc/mm: 64-bit: Don't load PACA in normal TLB miss exceptions Scott Wood
2011-05-18 21:05 ` [PATCH 5/7] powerpc/mm: 64-bit: don't handle non-standard page sizes Scott Wood
2011-05-18 21:36 ` Benjamin Herrenschmidt
2011-05-18 21:50 ` Scott Wood
2011-05-18 21:54 ` Benjamin Herrenschmidt
2011-05-18 21:05 ` [PATCH 6/7] powerpc/mm: 64-bit: tlb handler micro-optimization Scott Wood
2011-05-18 21:37 ` Benjamin Herrenschmidt [this message]
2011-05-18 21:51 ` Scott Wood
2011-05-18 21:54 ` Benjamin Herrenschmidt
2011-05-18 22:27 ` Scott Wood
2011-05-18 21:05 ` [PATCH 7/7] powerpc/e5500: set MMU_FTR_USE_PAIRED_MAS Scott Wood
2011-05-18 21:38 ` Benjamin Herrenschmidt
2011-05-18 21:52 ` Scott Wood
2011-05-18 21:58 ` Benjamin Herrenschmidt
2011-05-18 21:32 ` [PATCH 1/7] powerpc/mm: 64-bit 4k: use page-sized PMDs Benjamin Herrenschmidt
2011-05-18 21:46 ` Scott Wood
2011-05-18 21:52 ` Benjamin Herrenschmidt
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1305754667.7481.5.camel@pasglop \
--to=benh@kernel.crashing.org \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=scottwood@freescale.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).