[PATCH] powerpc/p1022ds: fix audio-related properties in the device tree

[Timur Tabi <timur@freescale.com>]

On the Freescale P1022DS reference board, the SSI audio controller is
connected in "asynchronous" mode to the codec's clocks, so the device tree
needs an "fsl,ssi-asynchronous" property.

Also remove the clock-frequency property from the wm8776 node, because
the clock is enabled only if U-Boot enables it, and U-Boot will set the
property if the clock is enabled.  A future version of the P1022DS audio
driver will configure the clock itself, but for now, the driver should
not be told that the clock is running when it isn't.

Signed-off-by: Timur Tabi <timur@freescale.com>
---

Without this patch, audio is broken on the P1022DS.  I don't know why I missed
this on the initial version of the device tree.  I will also post this
patch for the -stable trees.

 arch/powerpc/boot/dts/p1022ds.dts |    7 +++++--
 1 files changed, 5 insertions(+), 2 deletions(-)

diff --git a/arch/powerpc/boot/dts/p1022ds.dts b/arch/powerpc/boot/dts/p1022ds.dts
index 4f685a7..9255e58 100644
--- a/arch/powerpc/boot/dts/p1022ds.dts
+++ b/arch/powerpc/boot/dts/p1022ds.dts
@@ -209,8 +209,10 @@
 			wm8776:codec@1a {
 				compatible = "wlf,wm8776";
 				reg = <0x1a>;
-				/* MCLK source is a stand-alone oscillator */
-				clock-frequency = <12288000>;
+				/*
+				 * clock-frequency will be set by U-Boot if
+				 * the clock is enabled.
+				 */
 			};
 		};
 
@@ -281,6 +283,7 @@
 			fsl,playback-dma = <&dma00>;
 			fsl,capture-dma = <&dma01>;
 			fsl,fifo-depth = <16>;
+			fsl,ssi-asynchronous;
 		};
 
 		dma@c300 {
-- 
1.7.3.4