From: Timur Tabi <timur@freescale.com>
To: <kumar.gala@freescale.com>, <scottwood@freescale.com>,
<B29882@freescale.com>, <linuxppc-dev@ozlabs.org>
Subject: [PATCH] powerpc/85xx: disable timebase synchronization under the hypervisor
Date: Tue, 14 Jun 2011 18:04:33 -0500 [thread overview]
Message-ID: <1308092673-13045-1-git-send-email-timur@freescale.com> (raw)
The Freescale hypervisor does not allow guests to write to the timebase
registers (virtualizing the timebase register was deemed too complicated),
so don't try to synchronize the timebase registers when we're running
under the hypervisor.
This typically happens when kexec support is enabled.
Signed-off-by: Timur Tabi <timur@freescale.com>
---
arch/powerpc/platforms/85xx/p3041_ds.c | 11 +++++++++++
arch/powerpc/platforms/85xx/p4080_ds.c | 11 +++++++++++
arch/powerpc/platforms/85xx/p5020_ds.c | 11 +++++++++++
3 files changed, 33 insertions(+), 0 deletions(-)
diff --git a/arch/powerpc/platforms/85xx/p3041_ds.c b/arch/powerpc/platforms/85xx/p3041_ds.c
index c0242bc..8b651dfe 100644
--- a/arch/powerpc/platforms/85xx/p3041_ds.c
+++ b/arch/powerpc/platforms/85xx/p3041_ds.c
@@ -40,6 +40,9 @@
static int __init p3041_ds_probe(void)
{
unsigned long root = of_get_flat_dt_root();
+#ifdef CONFIG_SMP
+ extern struct smp_ops_t smp_85xx_ops;
+#endif
if (of_flat_dt_is_compatible(root, "fsl,P3041DS"))
return 1;
@@ -51,6 +54,14 @@ static int __init p3041_ds_probe(void)
ppc_md.restart = fsl_hv_restart;
ppc_md.power_off = fsl_hv_halt;
ppc_md.halt = fsl_hv_halt;
+#ifdef CONFIG_SMP
+ /*
+ * Disable the timebase sync operations because we can't write
+ * to the timebase registers under the hypervisor.
+ */
+ smp_85xx_ops.give_timebase = NULL;
+ smp_85xx_ops.take_timebase = NULL;
+#endif
return 1;
}
diff --git a/arch/powerpc/platforms/85xx/p4080_ds.c b/arch/powerpc/platforms/85xx/p4080_ds.c
index 32ea5eb..ae859ab 100644
--- a/arch/powerpc/platforms/85xx/p4080_ds.c
+++ b/arch/powerpc/platforms/85xx/p4080_ds.c
@@ -39,6 +39,9 @@
static int __init p4080_ds_probe(void)
{
unsigned long root = of_get_flat_dt_root();
+#ifdef CONFIG_SMP
+ extern struct smp_ops_t smp_85xx_ops;
+#endif
if (of_flat_dt_is_compatible(root, "fsl,P4080DS"))
return 1;
@@ -50,6 +53,14 @@ static int __init p4080_ds_probe(void)
ppc_md.restart = fsl_hv_restart;
ppc_md.power_off = fsl_hv_halt;
ppc_md.halt = fsl_hv_halt;
+#ifdef CONFIG_SMP
+ /*
+ * Disable the timebase sync operations because we can't write
+ * to the timebase registers under the hypervisor.
+ */
+ smp_85xx_ops.give_timebase = NULL;
+ smp_85xx_ops.take_timebase = NULL;
+#endif
return 1;
}
diff --git a/arch/powerpc/platforms/85xx/p5020_ds.c b/arch/powerpc/platforms/85xx/p5020_ds.c
index 2ea9ccc..d951618 100644
--- a/arch/powerpc/platforms/85xx/p5020_ds.c
+++ b/arch/powerpc/platforms/85xx/p5020_ds.c
@@ -40,6 +40,9 @@
static int __init p5020_ds_probe(void)
{
unsigned long root = of_get_flat_dt_root();
+#ifdef CONFIG_SMP
+ extern struct smp_ops_t smp_85xx_ops;
+#endif
if (of_flat_dt_is_compatible(root, "fsl,P5020DS"))
return 1;
@@ -51,6 +54,14 @@ static int __init p5020_ds_probe(void)
ppc_md.restart = fsl_hv_restart;
ppc_md.power_off = fsl_hv_halt;
ppc_md.halt = fsl_hv_halt;
+#ifdef CONFIG_SMP
+ /*
+ * Disable the timebase sync operations because we can't write
+ * to the timebase registers under the hypervisor.
+ */
+ smp_85xx_ops.give_timebase = NULL;
+ smp_85xx_ops.take_timebase = NULL;
+#endif
return 1;
}
--
1.7.3.4
next reply other threads:[~2011-06-14 23:04 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-06-14 23:04 Timur Tabi [this message]
2011-06-14 23:14 ` [PATCH] powerpc/85xx: disable timebase synchronization under the hypervisor Scott Wood
2011-06-14 23:15 ` Timur Tabi
2011-06-14 23:25 ` Scott Wood
2011-06-15 1:58 ` Benjamin Herrenschmidt
2011-06-15 2:10 ` Tabi Timur-B04825
2011-06-15 2:33 ` Benjamin Herrenschmidt
2011-06-22 11:44 ` Kumar Gala
2011-06-22 14:55 ` Timur Tabi
2011-06-23 17:22 ` Scott Wood
2011-06-23 17:33 ` Timur Tabi
2011-06-23 17:48 ` Scott Wood
2011-06-24 2:36 ` Segher Boessenkool
2011-06-24 2:38 ` Tabi Timur-B04825
2011-06-24 3:50 ` Segher Boessenkool
2011-06-24 15:16 ` Scott Wood
2011-06-24 23:36 ` Benjamin Herrenschmidt
2011-06-27 13:35 ` Kumar Gala
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1308092673-13045-1-git-send-email-timur@freescale.com \
--to=timur@freescale.com \
--cc=B29882@freescale.com \
--cc=kumar.gala@freescale.com \
--cc=linuxppc-dev@ozlabs.org \
--cc=scottwood@freescale.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).