From: Kumar Gala <galak@kernel.crashing.org>
To: linuxppc-dev@ozlabs.org
Subject: [RFC][PATCH 14/30] powerpc/85xx: Add a P1010RDB 36-bit address map device tree
Date: Thu, 10 Nov 2011 10:13:57 -0600 [thread overview]
Message-ID: <1320941653-29797-15-git-send-email-galak@kernel.crashing.org> (raw)
In-Reply-To: <1320941653-29797-14-git-send-email-galak@kernel.crashing.org>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
---
arch/powerpc/boot/dts/p1010rdb_36b.dts | 89 ++++++++++++++++++++++++++++++++
1 files changed, 89 insertions(+), 0 deletions(-)
create mode 100644 arch/powerpc/boot/dts/p1010rdb_36b.dts
diff --git a/arch/powerpc/boot/dts/p1010rdb_36b.dts b/arch/powerpc/boot/dts/p1010rdb_36b.dts
new file mode 100644
index 0000000..64776f4
--- /dev/null
+++ b/arch/powerpc/boot/dts/p1010rdb_36b.dts
@@ -0,0 +1,89 @@
+/*
+ * P1010 RDB Device Tree Source (36-bit address map)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/include/ "fsl/p1010si-pre.dtsi"
+
+/ {
+ model = "fsl,P1010RDB";
+ compatible = "fsl,P1010RDB";
+
+ memory {
+ device_type = "memory";
+ };
+
+ board_ifc: ifc: ifc@fffe1e000 {
+ /* NOR, NAND Flashes and CPLD on board */
+ ranges = <0x0 0x0 0xf 0xee000000 0x02000000
+ 0x1 0x0 0xf 0xff800000 0x00010000
+ 0x3 0x0 0xf 0xffb00000 0x00000020>;
+ reg = <0xf 0xffe1e000 0 0x2000>;
+ };
+
+ board_soc: soc: soc@fffe00000 {
+ ranges = <0x0 0xf 0xffe00000 0x100000>;
+ };
+
+ pci0: pcie@fffe09000 {
+ reg = <0xf 0xffe09000 0 0x1000>;
+ ranges = <0x2000000 0x0 0xc0000000 0xc 0x20000000 0x0 0x20000000
+ 0x1000000 0x0 0x00000000 0xf 0xffc10000 0x0 0x10000>;
+ pcie@0 {
+ ranges = <0x2000000 0x0 0xc0000000
+ 0x2000000 0x0 0xc0000000
+ 0x0 0x20000000
+
+ 0x1000000 0x0 0x0
+ 0x1000000 0x0 0x0
+ 0x0 0x100000>;
+ };
+ };
+
+ pci1: pcie@fffe0a000 {
+ reg = <0xf 0xffe0a000 0 0x1000>;
+ ranges = <0x2000000 0x0 0xc0000000 0xc 0x20000000 0x0 0x20000000
+ 0x1000000 0x0 0x00000000 0xf 0xffc10000 0x0 0x10000>;
+ pcie@0 {
+ ranges = <0x2000000 0x0 0xc0000000
+ 0x2000000 0x0 0xc0000000
+ 0x0 0x20000000
+
+ 0x1000000 0x0 0x0
+ 0x1000000 0x0 0x0
+ 0x0 0x100000>;
+ };
+ };
+};
+
+/include/ "p1010rdb.dtsi"
+/include/ "fsl/p1010si-post.dtsi"
--
1.7.3.4
next prev parent reply other threads:[~2011-11-10 16:14 UTC|newest]
Thread overview: 45+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-11-10 16:13 [RFC][PATCH 00/30] Rework FSL MPC85xx/Pxxxx device trees Kumar Gala
2011-11-10 16:13 ` [RFC][PATCH 01/30] powerpc/85xx: Simplify P1020RDB CAMP dts using includes Kumar Gala
2011-11-10 16:13 ` [RFC][PATCH 02/30] powerpc/85xx: Rework PCI nodes on P1020RDB Kumar Gala
2011-11-10 16:13 ` [RFC][PATCH 03/30] powerpc/85xx: Update SPI binding to match binding spec for P1020RDB Kumar Gala
2011-11-10 16:13 ` [RFC][PATCH 04/30] powerpc/85xx: Update P1020 SEC3.3 node to match actual SoC HW Kumar Gala
2011-11-10 16:13 ` [RFC][PATCH 05/30] powerpc/85xx: Add ethernet magic packet property to P1020 device tree Kumar Gala
2011-11-10 16:13 ` [RFC][PATCH 06/30] powerpc/85xx: p1020si.dtsi update interrupt handling Kumar Gala
2011-11-10 16:13 ` [RFC][PATCH 07/30] powerpc/85xx: create dts components to build up an SoC Kumar Gala
2011-11-10 16:13 ` [RFC][PATCH 08/30] powerpc/85xx: Rework P1020 SoC device tree Kumar Gala
2011-11-10 16:13 ` [RFC][PATCH 09/30] powerpc/85xx: Rework P1020RDB " Kumar Gala
2011-11-10 16:13 ` [RFC][PATCH 10/30] powerpc/85xx: Add P1020RDB 36-bit address map " Kumar Gala
2011-11-10 16:13 ` [RFC][PATCH 11/30] powerpc/85xx: Rework P1010RDB and P1010 " Kumar Gala
2011-11-10 16:13 ` [RFC][PATCH 12/30] powerpc/85xx: Add RTC to P1010RDB " Kumar Gala
2011-11-10 16:13 ` [RFC][PATCH 13/30] powerpc/85xx: Add crypto engine to P1010 SoC " Kumar Gala
2011-11-10 16:13 ` Kumar Gala [this message]
2011-11-10 16:13 ` [RFC][PATCH 15/30] powerpc/85xx: Rework P1022DS " Kumar Gala
2011-11-10 16:13 ` [RFC][PATCH 16/30] powerpc/85xx: Rework P2020DS " Kumar Gala
2011-11-10 16:14 ` [RFC][PATCH 17/30] powerpc/85xx: Rework P2020RDB " Kumar Gala
2011-11-10 16:14 ` [RFC][PATCH 18/30] powerpc/85xx: Rework P1021MDS " Kumar Gala
2011-11-10 16:14 ` [RFC][PATCH 19/30] powerpc/85xx: Rework MPC8572DS " Kumar Gala
2011-11-10 16:14 ` [RFC][PATCH 20/30] powerpc/85xx: Rework MPC8536DS device trees Kumar Gala
2011-11-10 16:14 ` [RFC][PATCH 21/30] powerpc/85xx: Rework MPC8544DS device tree Kumar Gala
2011-11-10 16:14 ` [RFC][PATCH 22/30] powerpc/85xx: Rework MPC8548CDS device trees Kumar Gala
2011-11-10 16:14 ` [RFC][PATCH 23/30] powerpc/85xx: Rework P4080DS " Kumar Gala
2011-11-10 16:14 ` [RFC][PATCH 24/30] powerpc/85xx: Rework P5020DS device tree Kumar Gala
2011-11-10 16:14 ` [RFC][PATCH 25/30] powerpc/85xx: Rework P3041DS " Kumar Gala
2011-11-10 16:14 ` [RFC][PATCH 26/30] powerpc/85xx: Rework P2041RDB " Kumar Gala
2011-11-10 16:14 ` [RFC][PATCH 27/30] powerpc/85xx: Rework P3060QDS " Kumar Gala
2011-11-10 16:14 ` [RFC][PATCH 28/30] powerpc/85xx: Rework P1023RDS " Kumar Gala
2011-11-10 16:14 ` [RFC][PATCH 29/30] powerpc/85xx: Rework MPC8568MDS " Kumar Gala
2011-11-10 16:14 ` [RFC][PATCH 30/30] powerpc/85xx: Rework MPC8569MDS " Kumar Gala
2011-11-10 18:10 ` [RFC][PATCH 28/30] powerpc/85xx: Rework P1023RDS " Scott Wood
2011-11-10 18:42 ` Kumar Gala
2011-11-10 18:55 ` Scott Wood
2011-11-10 20:24 ` Kumar Gala
2011-11-10 17:30 ` [RFC][PATCH 15/30] powerpc/85xx: Rework P1022DS " Tabi Timur-B04825
2011-11-10 18:50 ` Kumar Gala
2011-11-15 23:49 ` Tabi Timur-B04825
2011-11-16 21:47 ` Timur Tabi
2011-11-16 21:50 ` Kumar Gala
2011-11-10 18:05 ` [RFC][PATCH 08/30] powerpc/85xx: Rework P1020 SoC " Scott Wood
2011-11-10 18:46 ` Kumar Gala
2011-11-10 18:58 ` Scott Wood
2011-11-10 20:27 ` Kumar Gala
2011-11-11 15:29 ` Scott Wood
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1320941653-29797-15-git-send-email-galak@kernel.crashing.org \
--to=galak@kernel.crashing.org \
--cc=linuxppc-dev@ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).