From: Kumar Gala <galak@kernel.crashing.org>
To: linuxppc-dev@ozlabs.org
Subject: [PATCH 03/29] powerpc/85xx: Update SPI binding to match binding spec for P1020RDB
Date: Thu, 17 Nov 2011 01:15:55 -0600 [thread overview]
Message-ID: <1321514181-28897-3-git-send-email-galak@kernel.crashing.org> (raw)
In-Reply-To: <1321514181-28897-2-git-send-email-galak@kernel.crashing.org>
The SPI node is out of date with regards to the binding for fsl-espi and
driver support.
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
---
arch/powerpc/boot/dts/p1020rdb.dts | 30 +++++++++++++-----------------
arch/powerpc/boot/dts/p1020si.dtsi | 5 ++---
2 files changed, 15 insertions(+), 20 deletions(-)
diff --git a/arch/powerpc/boot/dts/p1020rdb.dts b/arch/powerpc/boot/dts/p1020rdb.dts
index 8b1a7ee..b31e7ec 100644
--- a/arch/powerpc/boot/dts/p1020rdb.dts
+++ b/arch/powerpc/boot/dts/p1020rdb.dts
@@ -149,49 +149,45 @@
};
spi@7000 {
-
- fsl_m25p80@0 {
+ flash@0 {
#address-cells = <1>;
#size-cells = <1>;
- compatible = "fsl,espi-flash";
+ compatible = "spansion,s25sl12801";
reg = <0>;
- linux,modalias = "fsl_m25p80";
- modal = "s25sl128b";
- spi-max-frequency = <50000000>;
- mode = <0>;
+ spi-max-frequency = <40000000>; /* input clock */
- partition@0 {
+ partition@u-boot {
/* 512KB for u-boot Bootloader Image */
reg = <0x0 0x00080000>;
- label = "SPI (RO) U-Boot Image";
+ label = "u-boot";
read-only;
};
- partition@80000 {
+ partition@dtb {
/* 512KB for DTB Image */
reg = <0x00080000 0x00080000>;
- label = "SPI (RO) DTB Image";
+ label = "dtb";
read-only;
};
- partition@100000 {
+ partition@kernel {
/* 4MB for Linux Kernel Image */
reg = <0x00100000 0x00400000>;
- label = "SPI (RO) Linux Kernel Image";
+ label = "kernel";
read-only;
};
- partition@500000 {
+ partition@fs {
/* 4MB for Compressed RFS Image */
reg = <0x00500000 0x00400000>;
- label = "SPI (RO) Compressed RFS Image";
+ label = "file system";
read-only;
};
- partition@900000 {
+ partition@jffs-fs {
/* 7MB for JFFS2 based RFS */
reg = <0x00900000 0x00700000>;
- label = "SPI (RW) JFFS2 RFS";
+ label = "file system jffs2";
};
};
};
diff --git a/arch/powerpc/boot/dts/p1020si.dtsi b/arch/powerpc/boot/dts/p1020si.dtsi
index 58f6b30..25e10cf 100644
--- a/arch/powerpc/boot/dts/p1020si.dtsi
+++ b/arch/powerpc/boot/dts/p1020si.dtsi
@@ -112,14 +112,13 @@
};
spi@7000 {
- cell-index = <0>;
#address-cells = <1>;
#size-cells = <0>;
- compatible = "fsl,espi";
+ compatible = "fsl,p1020-espi", "fsl,mpc8536-espi";
reg = <0x7000 0x1000>;
interrupts = <59 0x2>;
interrupt-parent = <&mpic>;
- mode = "cpu";
+ fsl,espi-num-chipselects = <4>;
};
gpio: gpio-controller@f000 {
--
1.7.3.4
next prev parent reply other threads:[~2011-11-17 7:16 UTC|newest]
Thread overview: 33+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-11-17 7:15 [PATCH 01/29] powerpc/85xx: Simplify P1020RDB CAMP dts using includes Kumar Gala
2011-11-17 7:15 ` [PATCH 02/29] powerpc/85xx: Rework PCI nodes on P1020RDB Kumar Gala
2011-11-17 7:15 ` Kumar Gala [this message]
2011-11-17 7:15 ` [PATCH 04/29] powerpc/85xx: Update P1020 SEC3.3 node to match actual SoC HW Kumar Gala
2011-11-17 7:15 ` [PATCH 05/29] powerpc/85xx: Add ethernet magic packet property to P1020 device tree Kumar Gala
2011-11-17 7:15 ` [PATCH 06/29] powerpc/85xx: p1020si.dtsi update interrupt handling Kumar Gala
2011-11-17 7:15 ` [PATCH 07/29] powerpc/85xx: create dts components to build up an SoC Kumar Gala
2011-11-17 7:16 ` [PATCH 08/29] powerpc/85xx: Rework MPC8536DS device trees Kumar Gala
2011-11-17 7:16 ` [PATCH 09/29] powerpc/85xx: Rework MPC8544DS device tree Kumar Gala
2011-11-17 7:16 ` [PATCH 10/29] powerpc/85xx: Rework MPC8548CDS device trees Kumar Gala
2011-11-17 7:16 ` [PATCH 11/29] powerpc/85xx: Rework MPC8568MDS device tree Kumar Gala
2011-11-17 7:16 ` [PATCH 12/29] powerpc/85xx: Rework MPC8569MDS " Kumar Gala
2011-11-17 7:16 ` [PATCH 13/29] powerpc/85xx: Rework MPC8572DS " Kumar Gala
2011-11-17 7:16 ` [PATCH 14/29] powerpc/85xx: Rework P1010RDB and P1010 " Kumar Gala
2011-11-17 7:16 ` [PATCH 15/29] powerpc/85xx: Add RTC to P1010RDB " Kumar Gala
2011-11-17 7:16 ` [PATCH 16/29] powerpc/85xx: Add crypto engine to P1010 SoC " Kumar Gala
2011-11-17 7:16 ` [PATCH 17/29] powerpc/85xx: Add a P1010RDB 36-bit address map " Kumar Gala
2011-11-17 7:16 ` [PATCH 18/29] powerpc/85xx: Rework P1020RDB " Kumar Gala
2011-11-17 7:16 ` [PATCH 19/29] powerpc/85xx: Add P1020RDB 36-bit address map " Kumar Gala
2011-11-17 7:16 ` [PATCH 20/29] powerpc/85xx: Rework P1021MDS " Kumar Gala
2011-11-17 7:16 ` [PATCH 21/29] powerpc/85xx: Rework P1022DS " Kumar Gala
2011-11-17 7:16 ` [PATCH 22/29] powerpc/85xx: Rework P1023RDS " Kumar Gala
2011-11-17 7:16 ` [PATCH 23/29] powerpc/85xx: Rework P2020DS " Kumar Gala
2011-11-17 7:16 ` [PATCH 24/29] powerpc/85xx: Rework P2020RDB " Kumar Gala
2011-11-17 7:16 ` [PATCH 25/29] powerpc/85xx: Rework P2041RDB " Kumar Gala
2011-11-17 7:16 ` [PATCH 26/29] powerpc/85xx: Rework P3041DS " Kumar Gala
2011-11-17 7:16 ` [PATCH 27/29] powerpc/85xx: Rework P3060QDS " Kumar Gala
2011-11-17 7:16 ` [PATCH 28/29] powerpc/85xx: Rework P4080DS device trees Kumar Gala
2011-11-17 7:16 ` [PATCH 29/29] powerpc/85xx: Rework P5020DS device tree Kumar Gala
2011-11-17 14:01 ` [PATCH 21/29] powerpc/85xx: Rework P1022DS " Tabi Timur-B04825
2011-11-17 14:33 ` Kumar Gala
2011-11-17 20:44 ` [PATCH 08/29] powerpc/85xx: Rework MPC8536DS device trees Scott Wood
2011-11-20 16:13 ` [PATCH 01/29] powerpc/85xx: Simplify P1020RDB CAMP dts using includes Kumar Gala
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1321514181-28897-3-git-send-email-galak@kernel.crashing.org \
--to=galak@kernel.crashing.org \
--cc=linuxppc-dev@ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).