From: Jia Hongtao <B38951@freescale.com>
To: <linuxppc-dev@lists.ozlabs.org>
Cc: B11780@freescale.com, b38951@freescale.com
Subject: [PATCH] powerpc/85xx: Add lbc suspend support for PM
Date: Mon, 21 Nov 2011 14:29:11 +0800 [thread overview]
Message-ID: <1321856951-10789-1-git-send-email-B38951@freescale.com> (raw)
Power supply for LBC registers is off when system go to deep-sleep state.
We save the values of registers before suspend and restore to registers
after resume.
We removed the last two reservation arrays from struct fsl_lbc_regs for
allocating less memory and minimizing the memcpy size.
Signed-off-by: Jiang Yutang <b14898@freescale.com>
Signed-off-by: Jia Hongtao <B38951@freescale.com>
Signed-off-by: Li Yang <leoli@freescale.com>
---
arch/powerpc/include/asm/fsl_lbc.h | 7 +++++--
arch/powerpc/sysdev/fsl_lbc.c | 36 ++++++++++++++++++++++++++++++++++++
2 files changed, 41 insertions(+), 2 deletions(-)
diff --git a/arch/powerpc/include/asm/fsl_lbc.h b/arch/powerpc/include/asm/fsl_lbc.h
index 8a0b5ec..420b453 100644
--- a/arch/powerpc/include/asm/fsl_lbc.h
+++ b/arch/powerpc/include/asm/fsl_lbc.h
@@ -238,8 +238,6 @@ struct fsl_lbc_regs {
#define FPAR_LP_CI_SHIFT 0
__be32 fbcr; /**< Flash Byte Count Register */
#define FBCR_BC 0x00000FFF
- u8 res11[0x8];
- u8 res8[0xF00];
};
/*
@@ -294,6 +292,11 @@ struct fsl_lbc_ctrl {
/* status read from LTESR by irq handler */
unsigned int irq_status;
+
+#ifdef CONFIG_SUSPEND
+ /* save regs when system go to deep-sleep */
+ struct fsl_lbc_regs *saved_regs;
+#endif
};
extern int fsl_upm_run_pattern(struct fsl_upm *upm, void __iomem *io_base,
diff --git a/arch/powerpc/sysdev/fsl_lbc.c b/arch/powerpc/sysdev/fsl_lbc.c
index d917573..9f33e40 100644
--- a/arch/powerpc/sysdev/fsl_lbc.c
+++ b/arch/powerpc/sysdev/fsl_lbc.c
@@ -330,6 +330,38 @@ err:
return ret;
}
+#ifdef CONFIG_SUSPEND
+
+/* save lbc registers */
+static int fsl_lbc_suspend(struct platform_device *pdev, pm_message_t state)
+{
+ struct fsl_lbc_ctrl *ctrl = dev_get_drvdata(&pdev->dev);
+ struct fsl_lbc_regs __iomem *lbc = ctrl->regs;
+
+ ctrl->saved_regs = kmalloc(sizeof(struct fsl_lbc_regs), GFP_KERNEL);
+ if (!ctrl->saved_regs)
+ return -ENOMEM;
+
+ _memcpy_fromio(ctrl->saved_regs, lbc, sizeof(struct fsl_lbc_regs));
+ return 0;
+}
+
+/* restore lbc registers */
+static int fsl_lbc_resume(struct platform_device *pdev)
+{
+ struct fsl_lbc_ctrl *ctrl = dev_get_drvdata(&pdev->dev);
+ struct fsl_lbc_regs __iomem *lbc = ctrl->regs;
+
+ if (ctrl->saved_regs) {
+ _memcpy_toio(lbc, ctrl->saved_regs,
+ sizeof(struct fsl_lbc_regs));
+ kfree(ctrl->saved_regs);
+ ctrl->saved_regs = NULL;
+ }
+ return 0;
+}
+#endif /* CONFIG_SUSPEND */
+
static const struct of_device_id fsl_lbc_match[] = {
{ .compatible = "fsl,elbc", },
{ .compatible = "fsl,pq3-localbus", },
@@ -344,6 +376,10 @@ static struct platform_driver fsl_lbc_ctrl_driver = {
.of_match_table = fsl_lbc_match,
},
.probe = fsl_lbc_ctrl_probe,
+#ifdef CONFIG_SUSPEND
+ .suspend = fsl_lbc_suspend,
+ .resume = fsl_lbc_resume,
+#endif
};
static int __init fsl_lbc_init(void)
--
1.7.5.1
next reply other threads:[~2011-11-21 7:44 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-11-21 6:29 Jia Hongtao [this message]
2011-11-24 5:04 ` [PATCH] powerpc/85xx: Add lbc suspend support for PM Kumar Gala
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1321856951-10789-1-git-send-email-B38951@freescale.com \
--to=b38951@freescale.com \
--cc=B11780@freescale.com \
--cc=linuxppc-dev@lists.ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox