[PATCH 1/2 v2] mtd/nand: fixup for fmr initialization of Freescale NAND controller

[Shengzhou Liu <Shengzhou.Liu@freescale.com>]

There was a bug for fmr initialization, which lead to  fmr was always 0x100
in fsl_elbc_chip_init() and caused FCM command timeout before calling
fsl_elbc_chip_init_tail(), now we initialize CWTO to maximum timeout value
and not relying on the setting of bootloader.

Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com>
---
v2: make fmr not relying on the setting of bootloader.

 drivers/mtd/nand/fsl_elbc_nand.c |   10 +++++-----
 1 files changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/mtd/nand/fsl_elbc_nand.c b/drivers/mtd/nand/fsl_elbc_nand.c
index eedd8ee..4f405a0 100644
--- a/drivers/mtd/nand/fsl_elbc_nand.c
+++ b/drivers/mtd/nand/fsl_elbc_nand.c
@@ -659,9 +659,7 @@ static int fsl_elbc_chip_init_tail(struct mtd_info *mtd)
 	if (chip->pagemask & 0xff000000)
 		al++;
 
-	/* add to ECCM mode set in fsl_elbc_init */
-	priv->fmr |= (12 << FMR_CWTO_SHIFT) |  /* Timeout > 12 ms */
-	             (al << FMR_AL_SHIFT);
+	priv->fmr |= al << FMR_AL_SHIFT;
 
 	dev_dbg(priv->dev, "fsl_elbc_init: nand->numchips = %d\n",
 	        chip->numchips);
@@ -764,8 +762,10 @@ static int fsl_elbc_chip_init(struct fsl_elbc_mtd *priv)
 	priv->mtd.priv = chip;
 	priv->mtd.owner = THIS_MODULE;
 
-	/* Set the ECCM according to the settings in bootloader.*/
-	priv->fmr = in_be32(&lbc->fmr) & FMR_ECCM;
+	/* set timeout to maximum */
+	priv->fmr = 15 << FMR_CWTO_SHIFT;
+	if (in_be32(&lbc->bank[priv->bank].or) & OR_FCM_PGS)
+		priv->fmr |= FMR_ECCM;
 
 	/* fill in nand_chip structure */
 	/* set up function call table */
-- 
1.6.4