[PATCH V2] gpio: mpc8xxx: don't allow input-only pins to be output for MPC5121

[Wolfram Sang <w.sang@pengutronix.de>]

Add a 5121-custom reject if an input-only pin is requested to be output
(see 18.3.1.1 in the refman). Also, rewrite mach-specific quirk setup to
consume less lines which scales better.

Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
---

Since V1, added an empty line after the new function.

 drivers/gpio/gpio-mpc8xxx.c |   18 +++++++++++++-----
 1 files changed, 13 insertions(+), 5 deletions(-)

diff --git a/drivers/gpio/gpio-mpc8xxx.c b/drivers/gpio/gpio-mpc8xxx.c
index ec3fcf0..bb4975f 100644
--- a/drivers/gpio/gpio-mpc8xxx.c
+++ b/drivers/gpio/gpio-mpc8xxx.c
@@ -115,6 +115,15 @@ static int mpc8xxx_gpio_dir_in(struct gpio_chip *gc, unsigned int gpio)
 	return 0;
 }
 
+static int mpc5121_gpio_dir_out(struct gpio_chip *gc, unsigned int gpio, int val)
+{
+	/* GPIO 28..31 are input only on MPC5121 */
+	if (gpio >= 28)
+		return -EINVAL;
+
+	return mpc8xxx_gpio_dir_out(gc, gpio, val);
+}
+
 static int mpc8xxx_gpio_dir_out(struct gpio_chip *gc, unsigned int gpio, int val)
 {
 	struct of_mm_gpio_chip *mm = to_of_mm_gpio_chip(gc);
@@ -340,11 +349,10 @@ static void __init mpc8xxx_add_controller(struct device_node *np)
 	mm_gc->save_regs = mpc8xxx_gpio_save_regs;
 	gc->ngpio = MPC8XXX_GPIO_PINS;
 	gc->direction_input = mpc8xxx_gpio_dir_in;
-	gc->direction_output = mpc8xxx_gpio_dir_out;
-	if (of_device_is_compatible(np, "fsl,mpc8572-gpio"))
-		gc->get = mpc8572_gpio_get;
-	else
-		gc->get = mpc8xxx_gpio_get;
+	gc->direction_output = of_device_is_compatible(np, "fsl,mpc5121-gpio") ?
+		mpc5121_gpio_dir_out : mpc8xxx_gpio_dir_out;
+	gc->get = of_device_is_compatible(np, "fsl,mpc8572-gpio") ?
+		mpc8572_gpio_get : mpc8xxx_gpio_get;
 	gc->set = mpc8xxx_gpio_set;
 	gc->to_irq = mpc8xxx_gpio_to_irq;
 
-- 
1.7.2.5